Subject: ibis-users V1 #17
From: owner-ibis-users@ (ibis-users)
To: [email-masked]

ibis-users         Tuesday, February 18 2003         Volume 01 : Number 017

----------------------------------------------------------------------

Date: Fri, 24 Jan 2003 11:19:14 +0530
From: "Sivakumar S. - CTD, Chennai." <[email-masked]>
Subject: [IBIS-Users] ibis question

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

- ------_=_NextPart_000_01C2C36C.53C6B190
Content-Type: text/plain;
	charset="iso-8859-1"

IBIS Gurus,
		I have a ibis model with the following inputs
INPUT1,INPUT2.When I compare these two inputs, there is no difference except
the [Voltage Range].I would like to know whether these will have similar
characteristics and behaviour or not?.Could anybody please give me some
explanation?.I have checked these two INPUTs in the hyperlynx ibis editor
and captured waveform and attached waveform for your reference.

	And also in some IBIS models, I found that the input buffers are
defined with POWER_CLAMP and GND_CLAMP .But this model is having only
GND_CLAMP defined.  What will be the effect? could anybody explain me? 

[Model]      INPUT1
Model_type   Input
Vinl  = 0.75v
Vinh  = 1.75v
| variable   typ          min           max
C_comp       2.0pF        1.5pF         2.5pF
|
|variable                 typ           min         max
[Temperature Range]       50            0           100
|
|variable                 typ           min         max
[Voltage Range]           2.5           2.375       2.7
|
[GND Clamp]
|voltage                  typ           min         max
0                          0             NA         NA
- -0.3                       0             NA         NA
- -0.4                      -0.05m         NA         NA
- -0.5                      -0.5m          NA         NA
- -0.55                     -1.3m          NA         NA
- -0.6                      -2.6m          NA         NA
- -0.65                     -4.4m          NA         NA
- -0.7                      -6.8m          NA         NA
- -0.75                     -9.6m          NA         NA
- -0.8                     -13.7m          NA         NA
- -0.9                     -26.0m          NA         NA
- -1.0                     -42.5m          NA         NA
- -1.2                     -81.5m          NA         NA
- -1.5                    -145.1m          NA         NA
- -1.8                    -212.6m          NA         NA
- -2.1                    -279.1m          NA         NA
- -2.4                    -344.8m          NA         NA
- -2.7                    -415.5m          NA         NA
- -3.0                    -480.1m          NA         NA   

[Model]      INPUT2
Model_type   Input
Vinl  = 0.75v
Vinh  = 1.75v
| variable   typ          min           max
C_comp       2.0pF        1.5pF         2.5pF
|
|variable                 typ           min         max
[Temperature Range]       50            0           100
|
|variable                 typ           min         max
[Voltage Range]           3.3           3.135       3.6
|
[GND Clamp]
|voltage                  typ           min         max
0                          0             NA         NA
- -0.3                       0             NA         NA
- -0.4                      -0.05m         NA         NA
- -0.5                      -0.5m          NA         NA
- -0.55                     -1.3m          NA         NA
- -0.6                      -2.6m          NA         NA
- -0.65                     -4.4m          NA         NA
- -0.7                      -6.8m          NA         NA
- -0.75                     -9.6m          NA         NA
- -0.8                     -13.7m          NA         NA
- -0.9                     -26.0m          NA         NA
- -1.0                     -42.5m          NA         NA
- -1.2                     -81.5m          NA         NA
- -1.5                    -145.1m          NA         NA
- -1.8                    -212.6m          NA         NA
- -2.1                    -279.1m          NA         NA
- -2.4                    -344.8m          NA         NA
- -2.7                    -415.5m          NA         NA
- -3.0                    -480.1m          NA         NA

Your comments are greatly appreciated.

regards
siva

- ------_=_NextPart_000_01C2C36C.53C6B190
Content-Type: application/octet-stream;
	name="Model INPUT2 _3_3- Ground clamp.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
	filename="Model INPUT2 _3_3- Ground clamp.pdf"

- ------_=_NextPart_000_01C2C36C.53C6B190
Content-Type: application/octet-stream;
	name="Model INPUT1 _2_5- Ground clamp.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
	filename="Model INPUT1 _2_5- Ground clamp.pdf"

- ------_=_NextPart_000_01C2C36C.53C6B190--
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 24 Jan 2003 11:12:59 -0500
From: Peter LaFlamme <[email-masked]>
Subject: Re: [IBIS-Users] ibis question

Hi Siva,

The input models are simply esd ground clamps. This must be how the semiconductor vendor implements ESD on these devices. Because they are ground clamps they are not dependent on the VDD or Voltage range of the receiver, so the two inputs behave exactly
the same I/V characteristics. If they also had a power clamp then the behavior would be different because the power clamp would tie the Voltage range (VDD) to the input in some manor.

Peter

- -- 
Peter LaFlamme

Applied Micro Circuits Corp.
System Applications Engineer
200 Minuteman Rd, 3rd Floor
Andover, MA 01810

978-247-8470 phone
978-623-0055 Fax

"Sivakumar S. - CTD, Chennai." wrote:
> 
> IBIS Gurus,
>                 I have a ibis model with the following inputs
> INPUT1,INPUT2.When I compare these two inputs, there is no difference except
> the [Voltage Range].I would like to know whether these will have similar
> characteristics and behaviour or not?.Could anybody please give me some
> explanation?.I have checked these two INPUTs in the hyperlynx ibis editor
> and captured waveform and attached waveform for your reference.
> 
>         And also in some IBIS models, I found that the input buffers are
> defined with POWER_CLAMP and GND_CLAMP .But this model is having only
> GND_CLAMP defined.  What will be the effect? could anybody explain me?
> 
> [Model]      INPUT1
> Model_type   Input
> Vinl  = 0.75v
> Vinh  = 1.75v
> | variable   typ          min           max
> C_comp       2.0pF        1.5pF         2.5pF
> |
> |variable                 typ           min         max
> [Temperature Range]       50            0           100
> |
> |variable                 typ           min         max
> [Voltage Range]           2.5           2.375       2.7
> |
> [GND Clamp]
> |voltage                  typ           min         max
> 0                          0             NA         NA
> -0.3                       0             NA         NA
> -0.4                      -0.05m         NA         NA
> -0.5                      -0.5m          NA         NA
> -0.55                     -1.3m          NA         NA
> -0.6                      -2.6m          NA         NA
> -0.65                     -4.4m          NA         NA
> -0.7                      -6.8m          NA         NA
> -0.75                     -9.6m          NA         NA
> -0.8                     -13.7m          NA         NA
> -0.9                     -26.0m          NA         NA
> -1.0                     -42.5m          NA         NA
> -1.2                     -81.5m          NA         NA
> -1.5                    -145.1m          NA         NA
> -1.8                    -212.6m          NA         NA
> -2.1                    -279.1m          NA         NA
> -2.4                    -344.8m          NA         NA
> -2.7                    -415.5m          NA         NA
> -3.0                    -480.1m          NA         NA
> 
> [Model]      INPUT2
> Model_type   Input
> Vinl  = 0.75v
> Vinh  = 1.75v
> | variable   typ          min           max
> C_comp       2.0pF        1.5pF         2.5pF
> |
> |variable                 typ           min         max
> [Temperature Range]       50            0           100
> |
> |variable                 typ           min         max
> [Voltage Range]           3.3           3.135       3.6
> |
> [GND Clamp]
> |voltage                  typ           min         max
> 0                          0             NA         NA
> -0.3                       0             NA         NA
> -0.4                      -0.05m         NA         NA
> -0.5                      -0.5m          NA         NA
> -0.55                     -1.3m          NA         NA
> -0.6                      -2.6m          NA         NA
> -0.65                     -4.4m          NA         NA
> -0.7                      -6.8m          NA         NA
> -0.75                     -9.6m          NA         NA
> -0.8                     -13.7m          NA         NA
> -0.9                     -26.0m          NA         NA
> -1.0                     -42.5m          NA         NA
> -1.2                     -81.5m          NA         NA
> -1.5                    -145.1m          NA         NA
> -1.8                    -212.6m          NA         NA
> -2.1                    -279.1m          NA         NA
> -2.4                    -344.8m          NA         NA
> -2.7                    -415.5m          NA         NA
> -3.0                    -480.1m          NA         NA
> 
> Your comments are greatly appreciated.
> 
> regards
> siva
> 
> 
>   ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>                                           Name: Model INPUT2 _3_3- Ground clamp.pdf
>    Model INPUT2 _3_3- Ground clamp.pdf    Type: Acrobat (application/pdf)
>                                       Encoding: base64
> 
>                                           Name: Model INPUT1 _2_5- Ground clamp.pdf
>    Model INPUT1 _2_5- Ground clamp.pdf    Type: Acrobat (application/pdf)
>                                       Encoding: base64
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 24 Jan 2003 08:38:22 -0800
From: "Muranyi, Arpad" <[email-masked]>
Subject: [IBIS-Users] RE: ibis question

Siva,

These two input models are going to act the same way exactly.  The
clamp curves and C_comp seem to be identical.  The fact that the
supply voltage is different will not make any difference in the
simulation with these models because there is no power clamp curve
in them.  (If there was one, you would see a difference in waveforms
that go over the supply voltage, one receiver would start clamping
at the lower supply while the other at the higher supply voltage).

Arpad
====================================================================

- -----Original Message-----
From: Sivakumar S. - CTD, Chennai. [mailto:[email-masked]]
Sent: Thursday, January 23, 2003 9:49 PM
To: [email-masked]
Cc: Muranyi, Arpad
Subject: ibis question

IBIS Gurus,
		I have a ibis model with the following inputs
INPUT1,INPUT2.When I compare these two inputs, there is no difference except
the [Voltage Range].I would like to know whether these will have similar
characteristics and behaviour or not?.Could anybody please give me some
explanation?.I have checked these two INPUTs in the hyperlynx ibis editor
and captured waveform and attached waveform for your reference.

	And also in some IBIS models, I found that the input buffers are
defined with POWER_CLAMP and GND_CLAMP .But this model is having only
GND_CLAMP defined.  What will be the effect? could anybody explain me? 

[Model]      INPUT1
Model_type   Input
Vinl  = 0.75v
Vinh  = 1.75v
| variable   typ          min           max
C_comp       2.0pF        1.5pF         2.5pF
|
|variable                 typ           min         max
[Temperature Range]       50            0           100
|
|variable                 typ           min         max
[Voltage Range]           2.5           2.375       2.7
|
[GND Clamp]
|voltage                  typ           min         max
0                          0             NA         NA
- -0.3                       0             NA         NA
- -0.4                      -0.05m         NA         NA
- -0.5                      -0.5m          NA         NA
- -0.55                     -1.3m          NA         NA
- -0.6                      -2.6m          NA         NA
- -0.65                     -4.4m          NA         NA
- -0.7                      -6.8m          NA         NA
- -0.75                     -9.6m          NA         NA
- -0.8                     -13.7m          NA         NA
- -0.9                     -26.0m          NA         NA
- -1.0                     -42.5m          NA         NA
- -1.2                     -81.5m          NA         NA
- -1.5                    -145.1m          NA         NA
- -1.8                    -212.6m          NA         NA
- -2.1                    -279.1m          NA         NA
- -2.4                    -344.8m          NA         NA
- -2.7                    -415.5m          NA         NA
- -3.0                    -480.1m          NA         NA   

[Model]      INPUT2
Model_type   Input
Vinl  = 0.75v
Vinh  = 1.75v
| variable   typ          min           max
C_comp       2.0pF        1.5pF         2.5pF
|
|variable                 typ           min         max
[Temperature Range]       50            0           100
|
|variable                 typ           min         max
[Voltage Range]           3.3           3.135       3.6
|
[GND Clamp]
|voltage                  typ           min         max
0                          0             NA         NA
- -0.3                       0             NA         NA
- -0.4                      -0.05m         NA         NA
- -0.5                      -0.5m          NA         NA
- -0.55                     -1.3m          NA         NA
- -0.6                      -2.6m          NA         NA
- -0.65                     -4.4m          NA         NA
- -0.7                      -6.8m          NA         NA
- -0.75                     -9.6m          NA         NA
- -0.8                     -13.7m          NA         NA
- -0.9                     -26.0m          NA         NA
- -1.0                     -42.5m          NA         NA
- -1.2                     -81.5m          NA         NA
- -1.5                    -145.1m          NA         NA
- -1.8                    -212.6m          NA         NA
- -2.1                    -279.1m          NA         NA
- -2.4                    -344.8m          NA         NA
- -2.7                    -415.5m          NA         NA
- -3.0                    -480.1m          NA         NA

Your comments are greatly appreciated.

regards
siva

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 24 Jan 2003 11:19:29 -0600
From: John Phillippe <[email-masked]>
Subject: Re: [IBIS-Users] Waveform mismatch question

Duane Mattheisen wrote:
> John  Take out as much fixture resistance as possible in the DC
> measurement. 
>   Also for the AC measurement put a big capacitor (0.1uf and a >2.2uF
> tantalum cap) to ground on the Rfixture having the other side of the
> Rfixture that connects to the output as close as possible to the
> output.   
>                                     Sincerely Duane Mattheisen
> "Angulo, John" wrote:
> 
>>The following is posted on behalf of John Phillippe at Motorola.  Please send any private replies to [email-masked] only.
>>
>>--------------------------------------------------
>>
>>Ibis Guru's,
>>   I get quite a few waveform mismatches between the rising/falling
>>edges and the I/V curves like the one shown below.
>>
>>WARNING - Model pad_26v_fast: The [Falling Waveform]
>>       with [R_fixture]=50 Ohms and [V_fixture_max]=0V
>>       has MAX column DC endpoints of  0.05V and  1.75v, but
>>       an equivalent load applied to the model's I-V tables yields
>>       different voltages ( 0.16V and  1.91V),
>>       a difference of  6.66% and  8.94%, respectively.
>>
>>I'm curious if this is a common problem, or if there are some simple
>>solutions to get everything to match up.  I check the waveforms and set
>>the sim time long enough to make sure the waveforms are stable.  Any
>>help/suggestions would be greatly appreciated.

Duane,
   Since I'm using s2ibis2, I should make rload as small as possible? 
On the order of 1ohm?  I read in this group before to use an rload of 
50ohms since that is what most people are using, and that it is a bit of 
a "standard."  I've also been told to have NO capacitance in the AC 
measurements, and again to only use a 50ohm resistor.
   I did try a run with a 0.1uF cap on the pad for the AC measurements, 
but that just slows the edge down.

- -- 
John Phillippe
SPS, 32 Bit Embedded Controller Division, IC Creation
Motorola      -  512-895-1835
Austin, TX    -  [email-masked]

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 24 Jan 2003 14:29:34 -0700
From: "Duane Mattheisen" <[email-masked]>
Subject: Re: [IBIS-Users] Waveform mismatch question

John
  I was writing for a bench measurement not a simulation.  The 50 ohms
is a common standard for the AC measurements.  And if your on a AC bench
measuring of actual devices, a capacitor helps when put it on the power
supply side of the R_fixture not on the device side, what that does is
take any voltage drop out of the wires going from the power supply to
the R_fixture.  For the DC measurement again on the bench the resistance
to make as low as possible is the fixture resistance which is between
the Voltage/Current measurement tool and the device.  

 On another note I down loaded s2ibis2_fix_tar.Z and s2ibis2_tar.Z but
did not know how to work with them.  Is there any advice you can give me
to start?

              Thanks Duane Matheisen
John Phillippe wrote:
> 
> Duane Mattheisen wrote:
> > John  Take out as much fixture resistance as possible in the DC
> > measurement.
> >   Also for the AC measurement put a big capacitor (0.1uf and a >2.2uF
> > tantalum cap) to ground on the Rfixture having the other side of the
> > Rfixture that connects to the output as close as possible to the
> > output.
> >                                     Sincerely Duane Mattheisen
> > "Angulo, John" wrote:
> >
> >>The following is posted on behalf of John Phillippe at Motorola.  Please send any private replies to [email-masked] only.
> >>
> >>--------------------------------------------------
> >>
> >>Ibis Guru's,
> >>   I get quite a few waveform mismatches between the rising/falling
> >>edges and the I/V curves like the one shown below.
> >>
> >>WARNING - Model pad_26v_fast: The [Falling Waveform]
> >>       with [R_fixture]=50 Ohms and [V_fixture_max]=0V
> >>       has MAX column DC endpoints of  0.05V and  1.75v, but
> >>       an equivalent load applied to the model's I-V tables yields
> >>       different voltages ( 0.16V and  1.91V),
> >>       a difference of  6.66% and  8.94%, respectively.
> >>
> >>I'm curious if this is a common problem, or if there are some simple
> >>solutions to get everything to match up.  I check the waveforms and set
> >>the sim time long enough to make sure the waveforms are stable.  Any
> >>help/suggestions would be greatly appreciated.
> 
> Duane,
>    Since I'm using s2ibis2, I should make rload as small as possible?
> On the order of 1ohm?  I read in this group before to use an rload of
> 50ohms since that is what most people are using, and that it is a bit of
> a "standard."  I've also been told to have NO capacitance in the AC
> measurements, and again to only use a 50ohm resistor.
>    I did try a run with a 0.1uF cap on the pad for the AC measurements,
> but that just slows the edge down.
> 
> --
> John Phillippe
> SPS, 32 Bit Embedded Controller Division, IC Creation
> Motorola      -  512-895-1835
> Austin, TX    -  [email-masked]
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 10:20:46 -0500
From: Peter LaFlamme <[email-masked]>
Subject: Re: [IBIS-Users] Waveform mismatch question

Hi John,
These types of warnings are very common. It appears to me that you are either using an old IBISCHK or you are creating a Version 2.1 model because the latest IBISCHK will give errors for any mismatch greater than 1% or so. If your I/O is single-ended then
you can determine where the problem is pretty easily. You need to determine what your output load is. In this case 50 ohms. Then plot your I-V curves and V-T curves. On the I-V curves you need to draw a 50-ohm load line. The load line intersection with the
I-V curve should match the end point of the V-T curve (for rising waveform use the pull-up curve, Falling waveform use pull-down). 

Is this a differential output? If so what technology is it? Creating an IBIS model of a differential output can be very tricky. IBIS actually models the differential output as a single-ended entity which it is definitely not. My experience with LVDS, PECL
and CML models has been that P and N output voltage levels are dependent on each other. For example on one of our LVDS I/O cells the sum of the P and N voltages will be 2.4V. So if the P side is 1.0V the N side will try to be 1.4V. To create a model as
such you need to set up your simulation such that the N side load is a voltage source that is dependent on the P output.  

I have read the papers on the IBIS website and they are somewhat helpful, however the cases presented are applicable to certain cases only. There needs to be an IBIS cookbook that explains both the theory behind creating the models and the how to. 

Well enough about Differential.

I hope that this helps.

Peter

Duane Mattheisen wrote:
> 
> John
>   I was writing for a bench measurement not a simulation.  The 50 ohms
> is a common standard for the AC measurements.  And if your on a AC bench
> measuring of actual devices, a capacitor helps when put it on the power
> supply side of the R_fixture not on the device side, what that does is
> take any voltage drop out of the wires going from the power supply to
> the R_fixture.  For the DC measurement again on the bench the resistance
> to make as low as possible is the fixture resistance which is between
> the Voltage/Current measurement tool and the device.
> 
>  On another note I down loaded s2ibis2_fix_tar.Z and s2ibis2_tar.Z but
> did not know how to work with them.  Is there any advice you can give me
> to start?
> 
>               Thanks Duane Matheisen
> John Phillippe wrote:
> >
> > Duane Mattheisen wrote:
> > > John  Take out as much fixture resistance as possible in the DC
> > > measurement.
> > >   Also for the AC measurement put a big capacitor (0.1uf and a >2.2uF
> > > tantalum cap) to ground on the Rfixture having the other side of the
> > > Rfixture that connects to the output as close as possible to the
> > > output.
> > >                                     Sincerely Duane Mattheisen
> > > "Angulo, John" wrote:
> > >
> > >>The following is posted on behalf of John Phillippe at Motorola.  Please send any private replies to [email-masked] only.
> > >>
> > >>--------------------------------------------------
> > >>
> > >>Ibis Guru's,
> > >>   I get quite a few waveform mismatches between the rising/falling
> > >>edges and the I/V curves like the one shown below.
> > >>
> > >>WARNING - Model pad_26v_fast: The [Falling Waveform]
> > >>       with [R_fixture]=50 Ohms and [V_fixture_max]=0V
> > >>       has MAX column DC endpoints of  0.05V and  1.75v, but
> > >>       an equivalent load applied to the model's I-V tables yields
> > >>       different voltages ( 0.16V and  1.91V),
> > >>       a difference of  6.66% and  8.94%, respectively.
> > >>
> > >>I'm curious if this is a common problem, or if there are some simple
> > >>solutions to get everything to match up.  I check the waveforms and set
> > >>the sim time long enough to make sure the waveforms are stable.  Any
> > >>help/suggestions would be greatly appreciated.
> >
> > Duane,
> >    Since I'm using s2ibis2, I should make rload as small as possible?
> > On the order of 1ohm?  I read in this group before to use an rload of
> > 50ohms since that is what most people are using, and that it is a bit of
> > a "standard."  I've also been told to have NO capacitance in the AC
> > measurements, and again to only use a 50ohm resistor.
> >    I did try a run with a 0.1uF cap on the pad for the AC measurements,
> > but that just slows the edge down.
> >
> > --
> > John Phillippe
> > SPS, 32 Bit Embedded Controller Division, IC Creation
> > Motorola      -  512-895-1835
> > Austin, TX    -  [email-masked]
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email [email-masked]
> |with just the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993

- -- 
Peter LaFlamme

Applied Micro Circuits Corp.
System Applications Engineer
200 Minuteman Rd, 3rd Floor
Andover, MA 01810

978-247-8470 phone
978-623-0055 Fax
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 08:52:25 -0800
From: [email-masked]
Subject: [IBIS-Users] 5V tollerant pad

Hi all,
I have a 3.3V I/O pad that is 5V tollerant.  I would like to include Rising
and Falling waveform data with voltage rails at 3.6 and 5.5 V.
Is there a way to include both of these conditions in the IBIS model?
Garry Felker

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 11:55:16 -0500
From: "Ingraham, Andrew" <[email-masked]>
Subject: RE: [IBIS-Users] Waveform mismatch question

> These types of warnings are very common. It appears to me that you are either using an old IBISCHK or you are creating a Version 2.1 model because the latest IBISCHK will give errors for any mismatch greater than 1% or so.
 
That is sometimes true.  However, in this case the warnings appear to be real.

The warning that he quoted as an example, had 0.05V versus 0.16V (not too severe but should be better), and 1.75V versus 1.91V.  They ought to match better than that.  Hence the warning.

The error percentages look OK, as if you are using a newer version of IBISCHK.  The older versions would report huge percentage differences on the order of 300%, for small differences between small voltages.

Are you sure that the waveform data wasn't truncated?  That's a likely cause of this problem.

Regards,
Andy

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 11:50:28 -0600
From: [email-masked]
Subject: RE: [IBIS-Users] 5V tollerant pad

Answer is yes.  Use the Model Selector switch.  But do you need to?

I thought 5V tolerant meant that the input of a chip with 3.3Vcc would not
be damaged by a 5 volt signal.

Aubrey Sparkman 
Signal Integrity 
[email-masked] 
(512) 723-3592

> -----Original Message-----
> From: [email-masked] [mailto:[email-masked]]
> Sent: Tuesday, January 28, 2003 10:52 AM
> To: [email-masked]
> Subject: [IBIS-Users] 5V tollerant pad
> 
> 
> Hi all,
> I have a 3.3V I/O pad that is 5V tollerant.  I would like to 
> include Rising
> and Falling waveform data with voltage rails at 3.6 and 5.5 V.
> Is there a way to include both of these conditions in the IBIS model?
> Garry Felker
> 
> 
> 
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email [email-masked]
> |with just the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
> 

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 11:02:00 -0700
From: "Duane Mattheisen" <[email-masked]>
Subject: Re: [IBIS-Users] 5V tollerant pad

Garry
  You might look at a TI IBIS model they do multiple Vcc ranges in one
file.  One would be a VCX16244 device.
         Duane Mattheisen

[email-masked] wrote:
> 
> Hi all,
> I have a 3.3V I/O pad that is 5V tollerant.  I would like to include Rising
> and Falling waveform data with voltage rails at 3.6 and 5.5 V.
> Is there a way to include both of these conditions in the IBIS model?
> Garry Felker
> 
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email [email-masked]
> |with just the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 10:21:44 -0800 (PST)
From: whiz kid <[email-masked]>
Subject: [IBIS-Users] Load Line Question.

Hi Gurus,
I have a question regarding plotting load lines based
on the V-I tables.

1) I have a open drain model with V_fixture=1.26v and
R_fixture = 50ohms.There are two V-T tables ( one
rising and one falling with V_fixture= 1.26 and
R_fixture = 50ohms ). I calculated the load line based
on the values as I=0 at V=Vcc and I = 1.26/50 =25.2ma.
I then plotted this loadline on the Pulldown curve by
drawing a line with co-ordinates (1.26v,0ma),
(0v,25.2ma) and  noted for the intersection of the VI
curve and the loadline. The intersection point that I
get is way off from the one the tool calculates, which
in turn is off from the VT table falling endpoint. My
question is what is it that I am missing so that I get
a different value from the tool and also fixing the
model so that I fall within the 1% tolerance of the VT
end point.

Thanks,
Rahul.

- --- Peter LaFlamme <[email-masked]> wrote:
> Hi John,
> These types of warnings are very common. It appears
> to me that you are either using an old IBISCHK or
> you are creating a Version 2.1 model because the
> latest IBISCHK will give errors for any mismatch
> greater than 1% or so. If your I/O is single-ended
> then
> you can determine where the problem is pretty
> easily. You need to determine what your output load
> is. In this case 50 ohms. Then plot your I-V curves
> and V-T curves. On the I-V curves you need to draw a
> 50-ohm load line. The load line intersection with
> the
> I-V curve should match the end point of the V-T
> curve (for rising waveform use the pull-up curve,
> Falling waveform use pull-down). 
> 
> Is this a differential output? If so what technology
> is it? Creating an IBIS model of a differential
> output can be very tricky. IBIS actually models the
> differential output as a single-ended entity which
> it is definitely not. My experience with LVDS, PECL
> and CML models has been that P and N output voltage
> levels are dependent on each other. For example on
> one of our LVDS I/O cells the sum of the P and N
> voltages will be 2.4V. So if the P side is 1.0V the
> N side will try to be 1.4V. To create a model as
> such you need to set up your simulation such that
> the N side load is a voltage source that is
> dependent on the P output.  
> 
> I have read the papers on the IBIS website and they
> are somewhat helpful, however the cases presented
> are applicable to certain cases only. There needs to
> be an IBIS cookbook that explains both the theory
> behind creating the models and the how to. 
> 
> Well enough about Differential.
> 
> I hope that this helps.
> 
> Peter
> 
> 
> Duane Mattheisen wrote:
> > 
> > John
> >   I was writing for a bench measurement not a
> simulation.  The 50 ohms
> > is a common standard for the AC measurements.  And
> if your on a AC bench
> > measuring of actual devices, a capacitor helps
> when put it on the power
> > supply side of the R_fixture not on the device
> side, what that does is
> > take any voltage drop out of the wires going from
> the power supply to
> > the R_fixture.  For the DC measurement again on
> the bench the resistance
> > to make as low as possible is the fixture
> resistance which is between
> > the Voltage/Current measurement tool and the
> device.
> > 
> >  On another note I down loaded s2ibis2_fix_tar.Z
> and s2ibis2_tar.Z but
> > did not know how to work with them.  Is there any
> advice you can give me
> > to start?
> > 
> >               Thanks Duane Matheisen
> > John Phillippe wrote:
> > >
> > > Duane Mattheisen wrote:
> > > > John  Take out as much fixture resistance as
> possible in the DC
> > > > measurement.
> > > >   Also for the AC measurement put a big
> capacitor (0.1uf and a >2.2uF
> > > > tantalum cap) to ground on the Rfixture having
> the other side of the
> > > > Rfixture that connects to the output as close
> as possible to the
> > > > output.
> > > >                                     Sincerely
> Duane Mattheisen
> > > > "Angulo, John" wrote:
> > > >
> > > >>The following is posted on behalf of John
> Phillippe at Motorola.  Please send any private
> replies to [email-masked] only.
> > > >>
> > >
> >>--------------------------------------------------
> > > >>
> > > >>Ibis Guru's,
> > > >>   I get quite a few waveform mismatches
> between the rising/falling
> > > >>edges and the I/V curves like the one shown
> below.
> > > >>
> > > >>WARNING - Model pad_26v_fast: The [Falling
> Waveform]
> > > >>       with [R_fixture]=50 Ohms and
> [V_fixture_max]=0V
> > > >>       has MAX column DC endpoints of  0.05V
> and  1.75v, but
> > > >>       an equivalent load applied to the
> model's I-V tables yields
> > > >>       different voltages ( 0.16V and  1.91V),
> > > >>       a difference of  6.66% and  8.94%,
> respectively.
> > > >>
> > > >>I'm curious if this is a common problem, or if
> there are some simple
> > > >>solutions to get everything to match up.  I
> check the waveforms and set
> > > >>the sim time long enough to make sure the
> waveforms are stable.  Any
> > > >>help/suggestions would be greatly appreciated.
> > >
> > > Duane,
> > >    Since I'm using s2ibis2, I should make rload
> as small as possible?
> > > On the order of 1ohm?  I read in this group
> before to use an rload of
> > > 50ohms since that is what most people are using,
> and that it is a bit of
> > > a "standard."  I've also been told to have NO
> capacitance in the AC
> > > measurements, and again to only use a 50ohm
> resistor.
> > >    I did try a run with a 0.1uF cap on the pad
> for the AC measurements,
> > > but that just slows the edge down.
> > >
> > > --
> > > John Phillippe
> > > SPS, 32 Bit Embedded Controller Division, IC
> Creation
> > > Motorola      -  512-895-1835
> > > Austin, TX    -  [email-masked]
> >
>
|------------------------------------------------------------------
> > |For help or to subscribe/unsubscribe, email
> [email-masked]
> > |with just the appropriate command message(s) in
> the body:
> > |
> > |  help
> > |  subscribe   ibis       <optional e-mail
> address, if different>
> > |  subscribe   ibis-users <optional e-mail
> address, if different>
> > |  unsubscribe ibis       <optional e-mail
> address, if different>
> > |  unsubscribe ibis-users <optional e-mail
> address, if different>
> > |
> > |or email a written request to
> [email-masked].
> > |
> > |IBIS reflector archives exist under:
> > |
> > |  http://www.eda.org/pub/ibis/email_archive/ 
> Recent
> > |  http://www.eda.org/pub/ibis/users_archive/ 
> Recent
> > |  http://www.eda.org/pub/ibis/email/         
> E-mail since 1993
> 
> -- 
> Peter LaFlamme
> 
> Applied Micro Circuits Corp.
> System Applications Engineer
> 200 Minuteman Rd, 3rd Floor
> Andover, MA 01810
> 
> 978-247-8470 phone
> 978-623-0055 Fax
>
|------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email
> [email-masked]
> |with just the appropriate command message(s) in the
> body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address,
> if different>
> |  subscribe   ibis-users <optional e-mail address,
> if different>
> |  unsubscribe ibis       <optional e-mail address,
> if different>
> |  unsubscribe ibis-users <optional e-mail address,
> if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
> 
=== message truncated ===

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 28 Jan 2003 10:49:07 -0800
From: "Tom Dagostino" <[email-masked]>
Subject: RE: [IBIS-Users] Load Line Question.

IBIS sums all the appropriate IV curves before it calculates the voltage
from the load line.  In your example, the open drain model, IBIS would sum
the pulldown, the ground clamp (if present in the model) and powerclamp
(again, if present in the model).  It would then compute the voltage from
the load line based on the summed IV curves.

Are you including everything?

Tom Dagostino
Teraspeed Consulting Group LLC     Teraspeed Consulting Group LLC
2926 SE Yamhill St.                Device Modeling Division
Portland, OR 97214                 13610 SW Harness Lane
                                   Beaverton, OR 97008
http://www.teraspeed.com           503-430-1065
[email-masked]

- -----Original Message-----
From: [email-masked]
[mailto:[email-masked]]On Behalf Of whiz kid
Sent: Tuesday, January 28, 2003 10:22 AM
To: [email-masked]
Subject: [IBIS-Users] Load Line Question.

Hi Gurus,
I have a question regarding plotting load lines based
on the V-I tables.

1) I have a open drain model with V_fixture=1.26v and
R_fixture = 50ohms.There are two V-T tables ( one
rising and one falling with V_fixture= 1.26 and
R_fixture = 50ohms ). I calculated the load line based
on the values as I=0 at V=Vcc and I = 1.26/50 =25.2ma.
I then plotted this loadline on the Pulldown curve by
drawing a line with co-ordinates (1.26v,0ma),
(0v,25.2ma) and  noted for the intersection of the VI
curve and the loadline. The intersection point that I
get is way off from the one the tool calculates, which
in turn is off from the VT table falling endpoint. My
question is what is it that I am missing so that I get
a different value from the tool and also fixing the
model so that I fall within the 1% tolerance of the VT
end point.

Thanks,
Rahul.

- --- Peter LaFlamme <[email-masked]> wrote:
> Hi John,
> These types of warnings are very common. It appears
> to me that you are either using an old IBISCHK or
> you are creating a Version 2.1 model because the
> latest IBISCHK will give errors for any mismatch
> greater than 1% or so. If your I/O is single-ended
> then
> you can determine where the problem is pretty
> easily. You need to determine what your output load
> is. In this case 50 ohms. Then plot your I-V curves
> and V-T curves. On the I-V curves you need to draw a
> 50-ohm load line. The load line intersection with
> the
> I-V curve should match the end point of the V-T
> curve (for rising waveform use the pull-up curve,
> Falling waveform use pull-down).
>
> Is this a differential output? If so what technology
> is it? Creating an IBIS model of a differential
> output can be very tricky. IBIS actually models the
> differential output as a single-ended entity which
> it is definitely not. My experience with LVDS, PECL
> and CML models has been that P and N output voltage
> levels are dependent on each other. For example on
> one of our LVDS I/O cells the sum of the P and N
> voltages will be 2.4V. So if the P side is 1.0V the
> N side will try to be 1.4V. To create a model as
> such you need to set up your simulation such that
> the N side load is a voltage source that is
> dependent on the P output.
>
> I have read the papers on the IBIS website and they
> are somewhat helpful, however the cases presented
> are applicable to certain cases only. There needs to
> be an IBIS cookbook that explains both the theory
> behind creating the models and the how to.
>
> Well enough about Differential.
>
> I hope that this helps.
>
> Peter
>
>
> Duane Mattheisen wrote:
> >
> > John
> >   I was writing for a bench measurement not a
> simulation.  The 50 ohms
> > is a common standard for the AC measurements.  And
> if your on a AC bench
> > measuring of actual devices, a capacitor helps
> when put it on the power
> > supply side of the R_fixture not on the device
> side, what that does is
> > take any voltage drop out of the wires going from
> the power supply to
> > the R_fixture.  For the DC measurement again on
> the bench the resistance
> > to make as low as possible is the fixture
> resistance which is between
> > the Voltage/Current measurement tool and the
> device.
> >
> >  On another note I down loaded s2ibis2_fix_tar.Z
> and s2ibis2_tar.Z but
> > did not know how to work with them.  Is there any
> advice you can give me
> > to start?
> >
> >               Thanks Duane Matheisen
> > John Phillippe wrote:
> > >
> > > Duane Mattheisen wrote:
> > > > John  Take out as much fixture resistance as
> possible in the DC
> > > > measurement.
> > > >   Also for the AC measurement put a big
> capacitor (0.1uf and a >2.2uF
> > > > tantalum cap) to ground on the Rfixture having
> the other side of the
> > > > Rfixture that connects to the output as close
> as possible to the
> > > > output.
> > > >                                     Sincerely
> Duane Mattheisen
> > > > "Angulo, John" wrote:
> > > >
> > > >>The following is posted on behalf of John
> Phillippe at Motorola.  Please send any private
> replies to [email-masked] only.
> > > >>
> > >
> >>--------------------------------------------------
> > > >>
> > > >>Ibis Guru's,
> > > >>   I get quite a few waveform mismatches
> between the rising/falling
> > > >>edges and the I/V curves like the one shown
> below.
> > > >>
> > > >>WARNING - Model pad_26v_fast: The [Falling
> Waveform]
> > > >>       with [R_fixture]=50 Ohms and
> [V_fixture_max]=0V
> > > >>       has MAX column DC endpoints of  0.05V
> and  1.75v, but
> > > >>       an equivalent load applied to the
> model's I-V tables yields
> > > >>       different voltages ( 0.16V and  1.91V),
> > > >>       a difference of  6.66% and  8.94%,
> respectively.
> > > >>
> > > >>I'm curious if this is a common problem, or if
> there are some simple
> > > >>solutions to get everything to match up.  I
> check the waveforms and set
> > > >>the sim time long enough to make sure the
> waveforms are stable.  Any
> > > >>help/suggestions would be greatly appreciated.
> > >
> > > Duane,
> > >    Since I'm using s2ibis2, I should make rload
> as small as possible?
> > > On the order of 1ohm?  I read in this group
> before to use an rload of
> > > 50ohms since that is what most people are using,
> and that it is a bit of
> > > a "standard."  I've also been told to have NO
> capacitance in the AC
> > > measurements, and again to only use a 50ohm
> resistor.
> > >    I did try a run with a 0.1uF cap on the pad
> for the AC measurements,
> > > but that just slows the edge down.
> > >
> > > --
> > > John Phillippe
> > > SPS, 32 Bit Embedded Controller Division, IC
> Creation
> > > Motorola      -  512-895-1835
> > > Austin, TX    -  [email-masked]
> >
>
|------------------------------------------------------------------
> > |For help or to subscribe/unsubscribe, email
> [email-masked]
> > |with just the appropriate command message(s) in
> the body:
> > |
> > |  help
> > |  subscribe   ibis       <optional e-mail
> address, if different>
> > |  subscribe   ibis-users <optional e-mail
> address, if different>
> > |  unsubscribe ibis       <optional e-mail
> address, if different>
> > |  unsubscribe ibis-users <optional e-mail
> address, if different>
> > |
> > |or email a written request to
> [email-masked].
> > |
> > |IBIS reflector archives exist under:
> > |
> > |  http://www.eda.org/pub/ibis/email_archive/
> Recent
> > |  http://www.eda.org/pub/ibis/users_archive/
> Recent
> > |  http://www.eda.org/pub/ibis/email/
> E-mail since 1993
>
> --
> Peter LaFlamme
>
> Applied Micro Circuits Corp.
> System Applications Engineer
> 200 Minuteman Rd, 3rd Floor
> Andover, MA 01810
>
> 978-247-8470 phone
> 978-623-0055 Fax
>
|------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email
> [email-masked]
> |with just the appropriate command message(s) in the
> body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address,
> if different>
> |  subscribe   ibis-users <optional e-mail address,
> if different>
> |  unsubscribe ibis       <optional e-mail address,
> if different>
> |  unsubscribe ibis-users <optional e-mail address,
> if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
>
=== message truncated ===

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Wed, 29 Jan 2003 14:56:04 -0800
From: "Muranyi, Arpad" <[email-masked]>
Subject: RE: [IBIS-Users] 5V tolerant pad

Garry,

You don't need to use the [Model Selector] for that.  The 5V safe feature
usually comes from the clamp diode (and/or the ESD circuit) being connected
to 5V while the pullup is at 3.3 V.  This can be modeled with the
[*** Reference] keywords which basically define which rail the IV curve
is connected to.

Arpad Muranyi
Intel Corporation
=========================================================================

- -----Original Message-----
From: [email-masked] [mailto:[email-masked]]
Sent: Tuesday, January 28, 2003 9:50 AM
To: [email-masked]; [email-masked]
Subject: RE: [IBIS-Users] 5V tollerant pad

Answer is yes.  Use the Model Selector switch.  But do you need to?

I thought 5V tolerant meant that the input of a chip with 3.3Vcc would not
be damaged by a 5 volt signal.

Aubrey Sparkman 
Signal Integrity 
[email-masked] 
(512) 723-3592

> -----Original Message-----
> From: [email-masked] [mailto:[email-masked]]
> Sent: Tuesday, January 28, 2003 10:52 AM
> To: [email-masked]
> Subject: [IBIS-Users] 5V tollerant pad
> 
> 
> Hi all,
> I have a 3.3V I/O pad that is 5V tollerant.  I would like to 
> include Rising
> and Falling waveform data with voltage rails at 3.6 and 5.5 V.
> Is there a way to include both of these conditions in the IBIS model?
> Garry Felker
> 
> 
> 
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email [email-masked]
> |with just the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
> 

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Wed, 29 Jan 2003 17:05:46 -0800
From: "Frank Dunlap" <[email-masked]>
Subject: RE: [IBIS-Users] 5V tolerant pad

Just a clarification:  a 5-volt tolerant I/O may not necessarily 
use a 5V supply.  There may not be a 5V supply, and thus, there
may not be an ESD diode to a 5V supply.

Regards,

Frank

- -----Original Message-----
From: Muranyi, Arpad [mailto:[email-masked]]
Sent: Wednesday, January 29, 2003 2:56 PM
To: [email-masked]
Subject: RE: [IBIS-Users] 5V tolerant pad

Garry,

You don't need to use the [Model Selector] for that.  The 5V safe feature
usually comes from the clamp diode (and/or the ESD circuit) being connected
to 5V while the pullup is at 3.3 V.  This can be modeled with the
[*** Reference] keywords which basically define which rail the IV curve
is connected to.

Arpad Muranyi
Intel Corporation
=========================================================================

- -----Original Message-----
From: [email-masked] [mailto:[email-masked]]
Sent: Tuesday, January 28, 2003 9:50 AM
To: [email-masked]; [email-masked]
Subject: RE: [IBIS-Users] 5V tollerant pad

Answer is yes.  Use the Model Selector switch.  But do you need to?

I thought 5V tolerant meant that the input of a chip with 3.3Vcc would not
be damaged by a 5 volt signal.

Aubrey Sparkman 
Signal Integrity 
[email-masked] 
(512) 723-3592

> -----Original Message-----
> From: [email-masked] [mailto:[email-masked]]
> Sent: Tuesday, January 28, 2003 10:52 AM
> To: [email-masked]
> Subject: [IBIS-Users] 5V tollerant pad
> 
> 
> Hi all,
> I have a 3.3V I/O pad that is 5V tollerant.  I would like to 
> include Rising
> and Falling waveform data with voltage rails at 3.6 and 5.5 V.
> Is there a way to include both of these conditions in the IBIS model?
> Garry Felker
> 
> 
> 
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email [email-masked]
> |with just the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to [email-masked].
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
> 

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Thu, 30 Jan 2003 12:01:14 -0600
From: "Dunbar, Tony" <[email-masked]>
Subject: [IBIS-Users] IBIS models for buffers with integrated Bus Hold

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

- ------_=_NextPart_001_01C2C889.941A4257
Content-Type: text/plain;
	charset="iso-8859-1"

I was looking at some models yesterday for devices that are supposed to have
integrated bus-hold circuits, according to the datasheets. However, the
models did not have the [Submodel] for the bus-hold circuit.
 
I'll probably need to take this up with the specific vendor, but can anyone
else - either model developers or users - who has experience with such
models comment on this? For example, is it legitimate to have a model that
effectively embeds the bus-hold effect in the primary model tables and
dispense with a submodel? I don't see how because the V_trigger sub-params
cannot be accommodated. An alternative explanation is that the bus-hold is
implemented with just a feedback resistor, the effect of which will be
embedded in the primary tables.
 
Thanks!
Tony Dunbar
Mentor Graphics Corporation

- ------_=_NextPart_001_01C2C889.941A4257
Content-Type: text/html;
	charset="iso-8859-1"

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">

<META content="MSHTML 5.50.4807.2300" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT face=Courier size=2><SPAN class=865500015-30012003>I was looking at 
some models yesterday for devices that are supposed to have integrated bus-hold 
circuits, according to the datasheets. However, the models did not have the 
[Submodel] for the bus-hold circuit.</SPAN></FONT></DIV>
<DIV><FONT face=Courier size=2><SPAN 
class=865500015-30012003></SPAN></FONT>&nbsp;</DIV>
<DIV><FONT face=Courier size=2><SPAN class=865500015-30012003>I'll probably need 
to take this up with the specific vendor, but can anyone else - either model 
developers or users - who has experience with such models comment on this? For 
example, is it legitimate to have a model that effectively embeds the bus-hold 
effect in the primary model tables and dispense with a submodel? I don't see how 
because the V_trigger sub-params cannot be accommodated. An alternative 
explanation is that the bus-hold is implemented with just a feedback resistor, 
the effect of which will be embedded in the primary tables.</SPAN></FONT></DIV>
<DIV><FONT face=Courier size=2><SPAN 
class=865500015-30012003></SPAN></FONT>&nbsp;</DIV>
<DIV><FONT face=Courier size=2><STRONG><SPAN 
class=865500015-30012003>Thanks!</SPAN></STRONG></FONT></DIV>
<DIV><FONT face=Courier size=2><STRONG>Tony Dunbar</STRONG></FONT></DIV>
<DIV><STRONG><FONT face=Courier size=2>Mentor Graphics 
Corporation</FONT></STRONG></DIV></BODY></HTML>

- ------_=_NextPart_001_01C2C889.941A4257--
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Thu, 30 Jan 2003 18:02:11 -0800
From: "Eric Hsu" <[email-masked]>
Subject: [IBIS-Users] Pin name assignment

Hi all,

When assigning for pin name, I am not sure there is any limits except column length. of character. For example, if naming by "#", "<xxx>", "(xxx)", "!", or even "%"? In case they can pass by "ibischk3", does it also mean they are acceptable by any commercial simulation tool as long as it can accept IBIS format?

Best Regard,

Eric

NetLogic Microsystems, Inc.

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 00:07:04 -0800 (PST)
From: Abdulrahman Rafiq <[email-masked]>
Subject: Re: [IBIS-Users] Pin name assignment

- --0-38922842-1044000424=:52141
Content-Type: text/plain; charset=us-ascii

Hi Eric, 
I take it you are trying to create a pin list for an ibis file. You can find information on this in the IBIS Information Specification Ver 3.2 http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf
The number of characters allowed per column in the pinlist section of the ibis model are as followed:
[Pin]: Max 5 characters allowed
signal_name: Max 20 characters allowed
model_name: Max 20 characters allowed
R_pin: Max 9 characters allowed
L_pin: Max 9 characters allowed
C_pin: Max 9 characters allowed 
I would suggest avoiding using symbols other than integers (1,2,3,...) and letters (A,B,C,...) in in the [Pin] column. 
See the document in the link specified above, it show a sample pinlist section. 
Hope this helps. 
Thanks, 
Abdulrahman Rafiq
[email-masked] 
 Eric Hsu <[email-masked]> wrote:Hi all,

When assigning for pin name, I am not sure there is any limits except column length. of character. For example, if naming by "#", "", "(xxx)", "!", or even "%"? In case they can pass by "ibischk3", does it also mean they are acceptable by any commercial simulation tool as long as it can accept IBIS format?

Best Regard,

Eric

NetLogic Microsystems, Inc.

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis 
| subscribe ibis-users 
| unsubscribe ibis 
| unsubscribe ibis-users 
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

- ------------------------------------------------
ABDULRAHMAN RAFIQ
Scientific Engineering Consultants
Voicmail:  (408) 527-5540
Phone: (805) 708-1976
Email: [email-masked] 
URL: www.geocities.com/arafiqsi/

- ---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
- --0-38922842-1044000424=:52141
Content-Type: text/html; charset=us-ascii

<P>Hi Eric, 
<P>I take it you are trying to create a pin list for an ibis file. You can find information on this in the IBIS Information Specification Ver 3.2 <A href="http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf">http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf</A>
<P>The number of characters allowed per column in the pinlist section of the ibis model are as followed:
<P>[Pin]: Max 5 characters allowed
<P>signal_name: Max 20 characters allowed
<P>model_name: Max 20 characters allowed
<P>R_pin: Max 9 characters allowed
<P>L_pin: Max 9 characters allowed
<P>C_pin: Max 9 characters allowed 
<P>I would suggest avoiding using symbols other than&nbsp;integers (1,2,3,...) and&nbsp;letters (A,B,C,...) in in the [Pin] column. 
<P>See the document in the link specified above, it show a sample pinlist section. 
<P>Hope this helps. 
<P>Thanks, 
<P>Abdulrahman Rafiq
<P><A href="mailto:[email-masked]">[email-masked]</A> 
<P>&nbsp;<B><I>Eric Hsu &lt;[email-masked]&gt;</I></B> wrote:
<BLOCKQUOTE style="BORDER-LEFT: #1010ff 2px solid; MARGIN-LEFT: 5px; PADDING-LEFT: 5px">Hi all,<BR><BR>When assigning for pin name, I am not sure there is any limits except column length. of character. For example, if naming by "#", "<XXX>", "(xxx)", "!", or even "%"? In case they can pass by "ibischk3", does it also mean they are acceptable by any commercial simulation tool as long as it can accept IBIS format?<BR><BR>Best Regard,<BR><BR>Eric<BR><BR>NetLogic Microsystems, Inc.<BR><BR>|------------------------------------------------------------------<BR>|For help or to subscribe/unsubscribe, email [email-masked]<BR>|with just the appropriate command message(s) in the body:<BR>|<BR>| help<BR>| subscribe ibis <OPTIONAL different if address, e-mail><BR>| subscribe ibis-users <OPTIONAL different if address, e-mail><BR>| unsubscribe ibis <OPTIONAL different if address, e-mail><BR>| unsubscribe ibis-users <OPTIONAL different if address, e-mail><BR>|<BR>|or email a written request to [email-masked].<BR>|<BR>|IBIS reflector archives exist under:<BR>|<BR>| http://www.eda.org/pub/ibis/email_archive/ Recent<BR>| http://www.eda.org/pub/ibis/users_archive/ Recent<BR>| http://www.eda.org/pub/ibis/email/ E-mail since 1993</BLOCKQUOTE><BR><BR>------------------------------------------------<br>ABDULRAHMAN RAFIQ<br>Scientific Engineering Consultants<br>Voicmail:  (408) 527-5540<br>Phone: (805) 708-1976<br>Email: [email-masked] <br>URL: www.geocities.com/arafiqsi/<p><br><hr size=1>Do you Yahoo!?<br>
<a href="http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com">Yahoo! Mail Plus</a> - Powerful. Affordable. <a href="http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com">Sign up now</a>
- --0-38922842-1044000424=:52141--
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 08:29:58 -0800
From: "Frank Dunlap" <[email-masked]>
Subject: RE: [IBIS-Users] Pin name assignment

This is a multi-part message in MIME format.

- ------_=_NextPart_001_01C2C945.FE87DFF4
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I think that the suggestion to stay with a-z and 0-9 characters (and to =
start the name
with a-z) is a good, safe idea.  I have seen cases, however, where IBIS =
models used=20
a trailing "#' to indicated active low.  Such signals show up in certain =
vendor's datasheets and
their IBIS models.  Isn't a good idea, though maybe not a requirement, =
to use the
EXACT same name in the IBIS model as is used in the datasheet, as these =
vendors
have done?
=20
So, though it's a great suggestion to use just a-z and 0-9, are there =
any known
issues in using other characters, and, in this case, specifically, "#"?
=20
Thanks,
=20
Frank

- -----Original Message-----
From: Abdulrahman Rafiq [mailto:[email-masked]]
Sent: Friday, January 31, 2003 12:07 AM
To: Eric Hsu; [email-masked]
Subject: Re: [IBIS-Users] Pin name assignment

Hi Eric,=20

I take it you are trying to create a pin list for an ibis file. You can =
find information on this in the IBIS Information Specification Ver 3.2 =
http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf=20

The number of characters allowed per column in the pinlist section of =
the ibis model are as followed:=20

[Pin]: Max 5 characters allowed=20

signal_name: Max 20 characters allowed=20

model_name: Max 20 characters allowed=20

R_pin: Max 9 characters allowed=20

L_pin: Max 9 characters allowed=20

C_pin: Max 9 characters allowed=20

I would suggest avoiding using symbols other than integers (1,2,3,...) =
and letters (A,B,C,...) in in the [Pin] column.=20

See the document in the link specified above, it show a sample pinlist =
section.=20

Hope this helps.=20

Thanks,=20

Abdulrahman Rafiq=20

[email-masked]=20

 Eric Hsu <[email-masked]> wrote:=20

Hi all,

When assigning for pin name, I am not sure there is any limits except =
column length. of character. For example, if naming by "#", "", "(xxx)", =
"!", or even "%"? In case they can pass by "ibischk3", does it also mean =
they are acceptable by any commercial simulation tool as long as it can =
accept IBIS format?

Best Regard,

Eric

NetLogic Microsystems, Inc.

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis=20
| subscribe ibis-users=20
| unsubscribe ibis=20
| unsubscribe ibis-users=20
|
|or email a written requ! est to [email-masked].
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

- ------------------------------------------------
ABDULRAHMAN RAFIQ
Scientific Engineering Consultants
Voicmail: (408) 527-5540
Phone: (805) 708-1976
Email: [email-masked]=20
URL: www.geocities.com/arafiqsi/=20

  _____ =20

Do you Yahoo!?
Yahoo! Mail  =
<http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com> Plus - =
Powerful. Affordable. Sign up  =
<http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com> now

- ------_=_NextPart_001_01C2C945.FE87DFF4
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">

<META content=3D"MSHTML 5.50.4807.2300" name=3DGENERATOR></HEAD>
<BODY>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>I=20
think that the suggestion to stay with a-z and 0-9 characters (and to =
start the=20
name</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>with=20
a-z) is a good, safe idea.&nbsp; I have seen cases, however,&nbsp;where =
IBIS=20
models used </FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>a=20
trailing </FONT></SPAN><SPAN class=3D315301716-31012003><FONT =
face=3DArial=20
color=3D#0000ff size=3D2>"#' to indicated active low.&nbsp; Such signals =
show up in=20
certain vendor's datasheets and</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>their=20
IBIS models.&nbsp; Isn't a good idea, though maybe not a requirement, to =
use=20
the</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>EXACT=20
same name in the IBIS model as is used in the datasheet, as these=20
vendors</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>have=20
done?</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =

size=3D2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>So,=20
though it's a great suggestion to use just a-z and 0-9, are there any=20
known</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =
size=3D2>issues=20
in using other characters, and, in this case, specifically,=20
"#"?</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =

size=3D2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =

size=3D2>Thanks,</FONT></SPAN></DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =

size=3D2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=3D315301716-31012003><FONT face=3DArial color=3D#0000ff =

size=3D2>Frank</FONT></SPAN></DIV>
<BLOCKQUOTE>
  <DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
  size=3D2>-----Original Message-----<BR><B>From:</B> Abdulrahman Rafiq=20
  [mailto:[email-masked]]<BR><B>Sent:</B> Friday, January 31, 2003 =
12:07=20
  AM<BR><B>To:</B> Eric Hsu; =
[email-masked]<BR><B>Subject:</B> Re:=20
  [IBIS-Users] Pin name assignment<BR><BR></FONT></DIV>
  <P>Hi Eric,=20
  <P>I take it you are trying to create a pin list for an ibis file. You =
can=20
  find information on this in the IBIS Information Specification Ver 3.2 =
<A=20
  =
href=3D"http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf">http://www.vhdl.o=
rg/pub/ibis/ver3.2/ver3_2.pdf</A>=20

  <P>The number of characters allowed per column in the pinlist section =
of the=20
  ibis model are as followed:=20
  <P>[Pin]: Max 5 characters allowed=20
  <P>signal_name: Max 20 characters allowed=20
  <P>model_name: Max 20 characters allowed=20
  <P>R_pin: Max 9 characters allowed=20
  <P>L_pin: Max 9 characters allowed=20
  <P>C_pin: Max 9 characters allowed=20
  <P>I would suggest avoiding using symbols other than&nbsp;integers =
(1,2,3,...)=20
  and&nbsp;letters (A,B,C,...) in in the [Pin] column.=20
  <P>See the document in the link specified above, it show a sample =
pinlist=20
  section.=20
  <P>Hope this helps.=20
  <P>Thanks,=20
  <P>Abdulrahman Rafiq=20
  <P><A href=3D"mailto:[email-masked]">[email-masked]</A>=20
  <P>&nbsp;<B><I>Eric Hsu &lt;[email-masked]&gt;</I></B> wrote:=20
  <BLOCKQUOTE=20
  style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px =
solid">Hi=20
    all,<BR><BR>When assigning for pin name, I am not sure there is any =
limits=20
    except column length. of character. For example, if naming by "#", =
"<XXX>",=20
    "(xxx)", "!", or even "%"? In case they can pass by "ibischk3", does =
it also=20
    mean they are acceptable by any commercial simulation tool as long =
as it can=20
    accept IBIS format?<BR><BR>Best Regard,<BR><BR>Eric<BR><BR>NetLogic=20
    Microsystems,=20
    =
Inc.<BR><BR>|------------------------------------------------------------=
- ------<BR>|For=20
    help or to subscribe/unsubscribe, email [email-masked]<BR>|with =
just the=20
    appropriate command message(s) in the body:<BR>|<BR>| help<BR>| =
subscribe=20
    ibis <OPTIONAL e-mail address, if different><BR>| subscribe =
ibis-users=20
    <OPTIONAL e-mail address, if different><BR>| unsubscribe ibis =
<OPTIONAL=20
    e-mail address, if different><BR>| unsubscribe ibis-users <OPTIONAL =
e-mail=20
    address, if different><BR>|<BR>|or email a written requ! est to=20
    [email-masked].<BR>|<BR>|IBIS reflector archives exist=20
    under:<BR>|<BR>| http://www.eda.org/pub/ibis/email_archive/ =
Recent<BR>|=20
    http://www.eda.org/pub/ibis/users_archive/ Recent<BR>|=20
    http://www.eda.org/pub/ibis/email/ E-mail since=20
  =
1993</BLOCKQUOTE><BR><BR>------------------------------------------------=
<BR>ABDULRAHMAN=20
  RAFIQ<BR>Scientific Engineering Consultants<BR>Voicmail: (408)=20
  527-5540<BR>Phone: (805) 708-1976<BR>Email: [email-masked] =
<BR>URL:=20
  www.geocities.com/arafiqsi/
  <P><BR>
  <HR SIZE=3D1>
  Do you Yahoo!?<BR><A=20
  =
href=3D"http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com">Yaho=
o! Mail=20
  Plus</A> - Powerful. Affordable. <A=20
  =
href=3D"http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com">Sign=
 up=20
  now</A></BLOCKQUOTE></BODY></HTML>

- ------_=_NextPart_001_01C2C945.FE87DFF4--
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 12:44:18 -0500
From: Robert Haller <[email-masked]>
Subject: Re: [IBIS-Users] Pin name assignment

Frank you hit my Pet peeve,

I think when designers/engineers (module, asic, semiconductor and SI) 
use special characters in signal names, pin names or node names they are 
asking for trouble. Most CAD tools can elegantly deal with  'special 
characters' like -+=!@#$%^&*() and operating system can even deal with 
them if they are quoted or backslashed or whatever.

But inevitably somewhere in your entire process flow you will run into a 
problem and consume wasted time debugging a problem that can simple be 
avoided by using intelligent naming conventions.

My suggestion is when you start a project write a design guide that sets 
up naming conventions and stick to them. Push back on those designs, 
models, etc that use special characters that can easily be avoided.

my $0.02
bob

Frank Dunlap wrote:
> I think that the suggestion to stay with a-z and 0-9 characters (and to 
> start the name
> with a-z) is a good, safe idea.  I have seen cases, however, where IBIS 
> models used
> a trailing "#' to indicated active low.  Such signals show up in certain 
> vendor's datasheets and
> their IBIS models.  Isn't a good idea, though maybe not a requirement, 
> to use the
> EXACT same name in the IBIS model as is used in the datasheet, as these 
> vendors
> have done?
>  
> So, though it's a great suggestion to use just a-z and 0-9, are there 
> any known
> issues in using other characters, and, in this case, specifically, "#"?
>  
> Thanks,
>  
> Frank
> 
>     -----Original Message-----
>     *From:* Abdulrahman Rafiq [mailto:[email-masked]]
>     *Sent:* Friday, January 31, 2003 12:07 AM
>     *To:* Eric Hsu; [email-masked]
>     *Subject:* Re: [IBIS-Users] Pin name assignment
> 
>     Hi Eric,
> 
>     I take it you are trying to create a pin list for an ibis file. You
>     can find information on this in the IBIS Information Specification
>     Ver 3.2 http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf
> 
>     The number of characters allowed per column in the pinlist section
>     of the ibis model are as followed:
> 
>     [Pin]: Max 5 characters allowed
> 
>     signal_name: Max 20 characters allowed
> 
>     model_name: Max 20 characters allowed
> 
>     R_pin: Max 9 characters allowed
> 
>     L_pin: Max 9 characters allowed
> 
>     C_pin: Max 9 characters allowed
> 
>     I would suggest avoiding using symbols other than integers
>     (1,2,3,...) and letters (A,B,C,...) in in the [Pin] column.
> 
>     See the document in the link specified above, it show a sample
>     pinlist section.
> 
>     Hope this helps.
> 
>     Thanks,
> 
>     Abdulrahman Rafiq
> 
>     [email-masked] <mailto:[email-masked]>
> 
>      */Eric Hsu <[email-masked]>/* wrote:
> 
>         Hi all,
> 
>         When assigning for pin name, I am not sure there is any limits
>         except column length. of character. For example, if naming by
>         "#", "", "(xxx)", "!", or even "%"? In case they can pass by
>         "ibischk3", does it also mean they are acceptable by any
>         commercial simulation tool as long as it can accept IBIS format?
> 
>         Best Regard,
> 
>         Eric
> 
>         NetLogic Microsystems, Inc.
> 
>         |------------------------------------------------------------------
>         |For help or to subscribe/unsubscribe, email [email-masked]
>         |with just the appropriate command message(s) in the body:
>         |
>         | help
>         | subscribe ibis
>         | subscribe ibis-users
>         | unsubscribe ibis
>         | unsubscribe ibis-users
>         |
>         |or email a written requ! est to [email-masked].
>         |
>         |IBIS reflector archives exist under:
>         |
>         | http://www.eda.org/pub/ibis/email_archive/ Recent
>         | http://www.eda.org/pub/ibis/users_archive/ Recent
>         | http://www.eda.org/pub/ibis/email/ E-mail since 1993
> 
> 
> 
>     ------------------------------------------------
>     ABDULRAHMAN RAFIQ
>     Scientific Engineering Consultants
>     Voicmail: (408) 527-5540
>     Phone: (805) 708-1976
>     Email: [email-masked]
>     URL: www.geocities.com/arafiqsi/
> 
> 
>     ------------------------------------------------------------------------
>     Do you Yahoo!?
>     Yahoo! Mail Plus
>     <http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com> -
>     Powerful. Affordable. Sign up now
>     <http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com>

- -- 
Robert J. Haller ([email-masked])
Principal Consultant
Signal Integrity Software Inc.
6 Clock Tower Place, Suite 250
Maynard, MA 01754
Phone: (978) 461-0449, ext 15

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 10:02:20 -0800
From: "Frank Dunlap" <[email-masked]>
Subject: RE: [IBIS-Users] Pin name assignment

Thanks for your two cents, Bob.  I do agree with you and Abdulrahman.
We have a case of having to deal with some "legacy" naming conventions.
The "#" is the only odd-ball character, so if we can slip that
one through, then we should be okay.  

As we know, it's not as easy as one would think.  As I recall, in HSPICE,
"#" is allowed, though "(" and ")" aren't.  In cases where a netlist
includes busses with "(" and ")", I have converted those characters
to "#", for HSPICE.  Of course, with busses, you may be able to just remove the 
"(" and ")", if that doesn't cause a naming conflict.  So, some wouldn't 
consider "(" and ")" to be special, but they have to be dealt with, if 
your target tool does not accept them.

Thanks for the feedback.

Still, specifically, for a trailing "#" in IBIS models, does anyone know of
a real problem?

Regards,

Frank

- -----Original Message-----
From: Robert Haller [mailto:[email-masked]]
Sent: Friday, January 31, 2003 9:44 AM
To: Frank Dunlap
Cc: [email-masked]; Eric Hsu; [email-masked]
Subject: Re: [IBIS-Users] Pin name assignment

Frank you hit my Pet peeve,

I think when designers/engineers (module, asic, semiconductor and SI) 
use special characters in signal names, pin names or node names they are 
asking for trouble. Most CAD tools can elegantly deal with  'special 
characters' like -+=!@#$%^&*() and operating system can even deal with 
them if they are quoted or backslashed or whatever.

But inevitably somewhere in your entire process flow you will run into a 
problem and consume wasted time debugging a problem that can simple be 
avoided by using intelligent naming conventions.

My suggestion is when you start a project write a design guide that sets 
up naming conventions and stick to them. Push back on those designs, 
models, etc that use special characters that can easily be avoided.

my $0.02
bob

Frank Dunlap wrote:
> I think that the suggestion to stay with a-z and 0-9 characters (and to 
> start the name
> with a-z) is a good, safe idea.  I have seen cases, however, where IBIS 
> models used
> a trailing "#' to indicated active low.  Such signals show up in certain 
> vendor's datasheets and
> their IBIS models.  Isn't a good idea, though maybe not a requirement, 
> to use the
> EXACT same name in the IBIS model as is used in the datasheet, as these 
> vendors
> have done?
>  
> So, though it's a great suggestion to use just a-z and 0-9, are there 
> any known
> issues in using other characters, and, in this case, specifically, "#"?
>  
> Thanks,
>  
> Frank
> 
>     -----Original Message-----
>     *From:* Abdulrahman Rafiq [mailto:[email-masked]]
>     *Sent:* Friday, January 31, 2003 12:07 AM
>     *To:* Eric Hsu; [email-masked]
>     *Subject:* Re: [IBIS-Users] Pin name assignment
> 
>     Hi Eric,
> 
>     I take it you are trying to create a pin list for an ibis file. You
>     can find information on this in the IBIS Information Specification
>     Ver 3.2 http://www.vhdl.org/pub/ibis/ver3.2/ver3_2.pdf
> 
>     The number of characters allowed per column in the pinlist section
>     of the ibis model are as followed:
> 
>     [Pin]: Max 5 characters allowed
> 
>     signal_name: Max 20 characters allowed
> 
>     model_name: Max 20 characters allowed
> 
>     R_pin: Max 9 characters allowed
> 
>     L_pin: Max 9 characters allowed
> 
>     C_pin: Max 9 characters allowed
> 
>     I would suggest avoiding using symbols other than integers
>     (1,2,3,...) and letters (A,B,C,...) in in the [Pin] column.
> 
>     See the document in the link specified above, it show a sample
>     pinlist section.
> 
>     Hope this helps.
> 
>     Thanks,
> 
>     Abdulrahman Rafiq
> 
>     [email-masked] <mailto:[email-masked]>
> 
>      */Eric Hsu <[email-masked]>/* wrote:
> 
>         Hi all,
> 
>         When assigning for pin name, I am not sure there is any limits
>         except column length. of character. For example, if naming by
>         "#", "", "(xxx)", "!", or even "%"? In case they can pass by
>         "ibischk3", does it also mean they are acceptable by any
>         commercial simulation tool as long as it can accept IBIS format?
> 
>         Best Regard,
> 
>         Eric
> 
>         NetLogic Microsystems, Inc.
> 
>         |------------------------------------------------------------------
>         |For help or to subscribe/unsubscribe, email [email-masked]
>         |with just the appropriate command message(s) in the body:
>         |
>         | help
>         | subscribe ibis
>         | subscribe ibis-users
>         | unsubscribe ibis
>         | unsubscribe ibis-users
>         |
>         |or email a written requ! est to [email-masked].
>         |
>         |IBIS reflector archives exist under:
>         |
>         | http://www.eda.org/pub/ibis/email_archive/ Recent
>         | http://www.eda.org/pub/ibis/users_archive/ Recent
>         | http://www.eda.org/pub/ibis/email/ E-mail since 1993
> 
> 
> 
>     ------------------------------------------------
>     ABDULRAHMAN RAFIQ
>     Scientific Engineering Consultants
>     Voicmail: (408) 527-5540
>     Phone: (805) 708-1976
>     Email: [email-masked]
>     URL: www.geocities.com/arafiqsi/
> 
> 
>     ------------------------------------------------------------------------
>     Do you Yahoo!?
>     Yahoo! Mail Plus
>     <http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com> -
>     Powerful. Affordable. Sign up now
>     <http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com>

- -- 
Robert J. Haller ([email-masked])
Principal Consultant
Signal Integrity Software Inc.
6 Clock Tower Place, Suite 250
Maynard, MA 01754
Phone: (978) 461-0449, ext 15

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 10:35:13 -0800
From: "Angulo, John" <[email-masked]>
Subject: [IBIS-Users] How to extract C_comp (with  Spice simulation )

The following is posted on behalf of Sudheer B S at ECAD Technologies Ltd.  Please address any private replies to [email-masked] only.

- -----Original Message-----

Hi  Experts

I have  Extracted C_comp from the  freq  domain  analysis with the Tank
ckt
arrangement . I am getting DIfferent  Capacitance ( C_comp) Value ( I am
Considering the
Imaginary Current at the Output )  for Different Value of  Inductor .(
Used 100nh + value)

I  want to know the proper analogy on this  Process .
Is anybody having    SPICE SETUP  for this  Process

Thank you

SUDHEER

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 14:44:36 -0500
From: "Ingraham, Andrew" <[email-masked]>
Subject: RE: [IBIS-Users] Pin name assignment

For the [Pin] name itself (first column), the IBIS spec is not clear that you can even use A-Z characters.  All of the examples in the IBIS spec have purely numeric pin names.  Most PGAs and BGAs use alpha-numeric pinnames, and there have probably been discussions about this in the maillists, but the spec itself is mum about it.

For the [Pin] signal_name, a trailing '#' ought to be OK for IBIS-aware tools, because they use it in the examples in the IBIS specs.

To be as generic as possible, you probably can't go wrong with A-Z, 0-9, and '_'.

Obviously, the IBIS comment character shouldn't be used anywhere in a name.

This seems like a good topic for a BIRD!  This is not just a matter of setting project naming conventions and sticking to them.  IBIS model files are meant to be transportable between different companies, so one needs worldwide standards that one should adhere to.

In lieu of a standard written into the IBIS spec, ibischk* may be the best we have to go on.  Then deal with exceptions if/when they come up.

It's strange that the one place the IBIS standard is specific about allowable characters, is in the filename; yet the filename is the one thing most easily corrected by the end-user should there be a problem.

Other odd characters that I used to see in signal names (not in IBIS but elsewhere), include the space character, and a trailing backslash.  The latter was once used to mean that a signal was low-true, kind of a shorthand for drawing a bar over the whole signal name.  Perhaps '#' evolved as a better replacement.

SPICE2 could use almost any non-whitespace character in names, except for parentheses, commas, or the equal sign.  SPICE would treat any of these as field delimiters or separators, equivalent to whitespace.  The first character in a name had some additional restrictions; for example, it couldn't be a digit.  I wouldn't assume even that all Berkeley SPICEs follow the same conventions.

HSpice is similar but has some differences.  I think it has the same problem with parentheses, but brackets ... square, angle, or curly ... are OK.  But beware that HSpice, unlike SPICE2, converts curly brackets into square brackets.

Regards,
Andy

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 14:32:04 -0600
From: "Dunbar, Tony" <[email-masked]>
Subject: RE: [IBIS-Users] Pin name assignment

While we are now also debating the [Pin] column characters (and I know this
thread didn't start there), may I throw in a point of practicality (and
hopefully stay on topic)? This particulary concerns the use of the alpha
character range, [a-z] and [A-Z], for PGA/BGA alpha-numeric pinnames.

Please be aware that certain SI tools IBIS parsers differentiate between
upper- and lower-case characters, just as the IBIS spec is case-sensitive,
except for reserved words and keywords. The common convention for PGA/BGA
pinnames is to use upper-case alpha-numeric characters; e.g. AE4. If you
write an IBIS [Pin] list that contains pin name "ae4", this may not auto-map
to pinname "AE4" that exists in the CAD library for the part/package.

Regards,
Tony

- -----Original Message-----
From: Ingraham, Andrew [mailto:[email-masked]]
Sent: Friday, January 31, 2003 1:45 PM
To: [email-masked]
Subject: RE: [IBIS-Users] Pin name assignment

For the [Pin] name itself (first column), the IBIS spec is not clear that
you can even use A-Z characters.  All of the examples in the IBIS spec have
purely numeric pin names.  Most PGAs and BGAs use alpha-numeric pinnames,
and there have probably been discussions about this in the maillists, but
the spec itself is mum about it.

For the [Pin] signal_name, a trailing '#' ought to be OK for IBIS-aware
tools, because they use it in the examples in the IBIS specs.

To be as generic as possible, you probably can't go wrong with A-Z, 0-9, and
'_'.

Obviously, the IBIS comment character shouldn't be used anywhere in a name.

This seems like a good topic for a BIRD!  This is not just a matter of
setting project naming conventions and sticking to them.  IBIS model files
are meant to be transportable between different companies, so one needs
worldwide standards that one should adhere to.

In lieu of a standard written into the IBIS spec, ibischk* may be the best
we have to go on.  Then deal with exceptions if/when they come up.

It's strange that the one place the IBIS standard is specific about
allowable characters, is in the filename; yet the filename is the one thing
most easily corrected by the end-user should there be a problem.

Other odd characters that I used to see in signal names (not in IBIS but
elsewhere), include the space character, and a trailing backslash.  The
latter was once used to mean that a signal was low-true, kind of a shorthand
for drawing a bar over the whole signal name.  Perhaps '#' evolved as a
better replacement.

SPICE2 could use almost any non-whitespace character in names, except for
parentheses, commas, or the equal sign.  SPICE would treat any of these as
field delimiters or separators, equivalent to whitespace.  The first
character in a name had some additional restrictions; for example, it
couldn't be a digit.  I wouldn't assume even that all Berkeley SPICEs follow
the same conventions.

HSpice is similar but has some differences.  I think it has the same problem
with parentheses, but brackets ... square, angle, or curly ... are OK.  But
beware that HSpice, unlike SPICE2, converts curly brackets into square
brackets.

Regards,
Andy

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 14:15:03 -0800
From: "Eric Hsu" <[email-masked]>
Subject: RE: [IBIS-Users] Pin name assignment

Hi Dunbar,

Thanks for your suggestion! Like you say, should we had better just use one case: no matter it is upper- or lower- case in IBIS model, even it would cause any problem when checking by the parsers (like "ibischk3")? 

Best Regard,

Eric

NetLogic Microsystems, Inc.

- -----Original Message-----
From: Dunbar, Tony [mailto:[email-masked]]
Sent: Friday, January 31, 2003 12:32 PM
To: [email-masked]
Subject: RE: [IBIS-Users] Pin name assignment

While we are now also debating the [Pin] column characters (and I know this
thread didn't start there), may I throw in a point of practicality (and
hopefully stay on topic)? This particulary concerns the use of the alpha
character range, [a-z] and [A-Z], for PGA/BGA alpha-numeric pinnames.

Please be aware that certain SI tools IBIS parsers differentiate between
upper- and lower-case characters, just as the IBIS spec is case-sensitive,
except for reserved words and keywords. The common convention for PGA/BGA
pinnames is to use upper-case alpha-numeric characters; e.g. AE4. If you
write an IBIS [Pin] list that contains pin name "ae4", this may not auto-map
to pinname "AE4" that exists in the CAD library for the part/package.

Regards,
Tony

- -----Original Message-----
From: Ingraham, Andrew [mailto:[email-masked]]
Sent: Friday, January 31, 2003 1:45 PM
To: [email-masked]
Subject: RE: [IBIS-Users] Pin name assignment

For the [Pin] name itself (first column), the IBIS spec is not clear that
you can even use A-Z characters.  All of the examples in the IBIS spec have
purely numeric pin names.  Most PGAs and BGAs use alpha-numeric pinnames,
and there have probably been discussions about this in the maillists, but
the spec itself is mum about it.

For the [Pin] signal_name, a trailing '#' ought to be OK for IBIS-aware
tools, because they use it in the examples in the IBIS specs.

To be as generic as possible, you probably can't go wrong with A-Z, 0-9, and
'_'.

Obviously, the IBIS comment character shouldn't be used anywhere in a name.

This seems like a good topic for a BIRD!  This is not just a matter of
setting project naming conventions and sticking to them.  IBIS model files
are meant to be transportable between different companies, so one needs
worldwide standards that one should adhere to.

In lieu of a standard written into the IBIS spec, ibischk* may be the best
we have to go on.  Then deal with exceptions if/when they come up.

It's strange that the one place the IBIS standard is specific about
allowable characters, is in the filename; yet the filename is the one thing
most easily corrected by the end-user should there be a problem.

Other odd characters that I used to see in signal names (not in IBIS but
elsewhere), include the space character, and a trailing backslash.  The
latter was once used to mean that a signal was low-true, kind of a shorthand
for drawing a bar over the whole signal name.  Perhaps '#' evolved as a
better replacement.

SPICE2 could use almost any non-whitespace character in names, except for
parentheses, commas, or the equal sign.  SPICE would treat any of these as
field delimiters or separators, equivalent to whitespace.  The first
character in a name had some additional restrictions; for example, it
couldn't be a digit.  I wouldn't assume even that all Berkeley SPICEs follow
the same conventions.

HSpice is similar but has some differences.  I think it has the same problem
with parentheses, but brackets ... square, angle, or curly ... are OK.  But
beware that HSpice, unlike SPICE2, converts curly brackets into square
brackets.

Regards,
Andy

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 31 Jan 2003 17:22:38 -0500
From: "Ingraham, Andrew" <[email-masked]>
Subject: RE: [IBIS-Users] Pin name assignment (off-topic)

Here is something interesting I just noticed, mostly off-topic but
slightly relevant....

The original mail I got from Eric Hsu listed five example pin names.
The second example in the list was "<xxx>", which I see as three
lower-case X's between angle brackets, all enclosed in double-quotes.

However, the replies that came from other people showed just a "" for
the second item.  Nothing between the quotes!

It just goes to show that some characters don't work even in e-mail and
text editors (as many of you already knew).  If someone e-mailed an IBIS
model file directly, not as an attachment, some characters or strings
within the file might get dropped.

Andy

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Mon, 03 Feb 2003 16:02:13 -0500
From: Sudheer B S <[email-masked]>
Subject: [IBIS-Users] CAN 3.3v IBIS models can be used for 5v device 

Hi   All

I   have IBIS model  for a device  operating  at 3.3v , The model  of
the same device  for  5V  is  not
availible .My quection is  , Since the technology remains same  by
extending the Pull up .pulldn
pwrclamp and Gnd clamp  Curves  AND by   Changing the Voltage range
(also threshold)  Can we make IBIS  models ??

Does the change in  device  voltage  will have Large Variation in C_comp
??

Instead of Going for Equivalent 5v  device , this should be the better
choice .
please  Correct me  If  I  my   approach is Wrong

Thank you

SUDHEER

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Mon, 3 Feb 2003 21:16:29 -0800
From: "Tom Dagostino" <[email-masked]>
Subject: RE: [IBIS-Users] CAN 3.3v IBIS models can be used for 5v device 

Sudheer

When you increase the voltage on a logic gate you are changing the bias on
the FETs (I'm assuming a CMOS technology, the same applies for bipolar).
With the increased Vgs, from 3.3 to 5.0, you are turning on the FET harder
resulting in a lower output impedance.  You are also speeding the device up.
So the 3.3 Volt model will be slower and have higher output impedance than
the 5 Volt version. Also the voltage swing of the transitions will be
greater with 5 Volt operation.

The differences in C_comp will pale compare to the ones mentioned above.

Not a good idea.

Tom Dagostino
Teraspeed Consulting Group LLC     Teraspeed Consulting Group LLC
2926 SE Yamhill St.                Device Modeling Division
Portland, OR 97214                 13610 SW Harness Lane
                                   Beaverton, OR 97008
http://www.teraspeed.com           503-430-1065
[email-masked]

- -----Original Message-----
From: [email-masked]
[mailto:[email-masked]]On Behalf Of Sudheer B S
Sent: Monday, February 03, 2003 1:02 PM
To: [email-masked]
Subject: [IBIS-Users] CAN 3.3v IBIS models can be used for 5v device

Hi   All

I   have IBIS model  for a device  operating  at 3.3v , The model  of
the same device  for  5V  is  not
availible .My quection is  , Since the technology remains same  by
extending the Pull up .pulldn
pwrclamp and Gnd clamp  Curves  AND by   Changing the Voltage range
(also threshold)  Can we make IBIS  models ??

Does the change in  device  voltage  will have Large Variation in C_comp
??

Instead of Going for Equivalent 5v  device , this should be the better
choice .
please  Correct me  If  I  my   approach is Wrong

Thank you

SUDHEER

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Wed, 5 Feb 2003 12:01:25 +0100
From: Ralf Bruening <[email-masked]>
Subject: [IBIS-Users] European IBIS Summit@DATe2003  - 2nd call for participation and presentations

To All:

We have been holding successful European IBIS Summit Meetings for the
past five years.  This year we are again holding a meeting along with
DATE 2003 on Friday, March 7, 2003.  The purpose is to promote
communication among users and developers of IBIS models in Europe.

The meeting is free and open to everyone.  However, you will have
to register for the exhibition at DATE (to get access to the
meeting room).  Refreshments are planned.

Below is some information on the IBIS Summit and some related events.
You are invited to register and also to submit presentation proposals.
We already have three or four presentations.

Bob Ross
Mentor Graphics

Ralf Bruening
ZUKEN EMC Technology Center

          E U R O P E A N   I B I S   S U M M I T   M E E T I N G
                   S E C O N D   A N N O U N C E M E N T 

Time/Date:     9:00 PM - 2:00 PM, Friday, March 7, 2003

Location:      Meeting room in ICM (International Congress Center)
               Messe Munich, Germany (where DATE 2003 is being held)

               (Free DATE 2003 exhibition registration for room entry,
               see URL below)

Content:       Presentations and Discussions

Purpose:       Solicit and Exchange IBIS Model Related Information and Ideas

Sponsors:      Mentor Graphics, Zuken, Siemens

DATE 2003:     March 3-7, 2003.  The IBIS meeting is scheduled the day
               after the exhibition and on the last day of DATE 2003.

Location:      International Congress Center, Munich, Germany

DATE URL:      http://www.date-conference.com

BACKGROUND

We have been holding interesting European IBIS Summit Meetings for the
last five years.  This year we are planning another meeting to include:

  Submitted Presentations on IBIS Topics (See below)
  Information about IBIS Version 4.0
  Less formal Ad Hoc Presentations and Discussions
  IBIS Questions and Answers
  
Below is an invitation to register and also to submit presentations.

CALL FOR PARTICIPANTS

People involved in IBIS Model development, EDA tool development, and digital
circuit design are invited to participate in the European IBIS Summit meeting.
If you plan to participate, please register with the information below
(deadline, March 3, 2003):

  Name:
  E-mail address:
  Company:
  Telephone:

Send to:

Ralf Bruening ([email-masked])
  
CALL FOR PRESENTATIONS

We are seeking presentations from individuals who have IBIS experiences
or issues.  Some suggested subjects of interest are:

  IBIS Model Development Experiences
  Company IBIS Standards and Requirements
  Generating and Validating IBIS Models
  Future IBIS Requirements
  EMC/EMI IBIS Issues

Format of Presentation:  LCD or Overhead Projections
Time:                    15-30 Minutes
Electronic Archival:     We request electronic versions so that the
                         presentations can be archived and also made
                         available to non-attendees.  Formats used in
                         the past have been text, Power Point, Word, 
                         Postscript, and Acrobat.  Electronic presentations
                         should be made available by March 3, 2003.
                         Otherwise the presentor will be expected to provide
                         30 copies for distribution.

If you plan a presentation, please supply

  Title:
  Presenter:
  E-mail address:
  Company:
  Telephone:

  Estimate Time:

Send this to both:

  Ralf Bruening  ([email-masked])
  Bob Ross ([email-masked])

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Wed, 5 Feb 2003 11:58:21 -0800 
From: "Angulo, John" <[email-masked]>
Subject: [IBIS-Users] Shared pin modelling in MCM

The following is posted on behalf of Michael Sendrove at Globespanvirata.  Please send any private replies to [email-masked] only.

- -----------------------

Hi:
I am trying to find information on how I should specify a pin which is bonded to 2 different pads in an MCM. The information I have is the IBIS model from the two different fabs for the 2 different technologies.

For the first cut model, I will be neglecting substrate and package effects on the electrical charateristics of the pins. This means that I can replicate the IBIS modelling information from the Fabs. That's fine for IO which is directly mapped to 1 bond pad on either die.

However - in this particular MCM, there are several pins bonded to more than 1 pad, and often the pads are on different die. Anyone got any idea what I should do in this case?

Any help much appreciated,
Thanks,
Mike

Mike Sendrove,
IC Design Engineer,
[email-masked]
DDI: +44 1223 707380
www.globespanvirata.com

******************Legal Disclaimer**************************
"This email may contain confidential and privileged material for the sole use of the intended recipient.  Any unauthorized review, use or distribution by others is strictly prohibited.  If you have received the message in error, please advise the sender by reply email @globespanvirata.com, and delete the message. Thank you."
****************************************************************
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 07 Feb 2003 14:22:56 +0530
From: "Renukaradhya Hiremath" <[email-masked]>
Subject: [IBIS-Users] convertion of MLM to IBIS model

This is a multi-part message in MIME format.
- --------------25326D3EFF5C2526CDF6A402
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi All,
    I am new to this field, I want details on convertion of  Multi Line
Model(MLM) of connector to IBIS Model. Is there any tool to convert MLM
to IBIS model?

Thanks in advance,
Renukaradhya Hiremath

- --------------25326D3EFF5C2526CDF6A402
Content-Type: text/x-vcard; charset=us-ascii;
 name="rnhiremath.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Renukaradhya Hiremath
Content-Disposition: attachment;
 filename="rnhiremath.vcf"

begin:vcard 
n:;
x-mozilla-html:TRUE
org:;TATA ELXSI LIMITED
adr:;;;Bangalore;Karnataka;;
version:2.1
email;internet:[email-masked]
title:Engineer (D & D)
fn:Renukaradhya Hiremath
end:vcard

- --------------25326D3EFF5C2526CDF6A402--

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 7 Feb 2003 08:23:30 -0800 
From: "Peters, Stephen" <[email-masked]>
Subject: [IBIS-Users] Agenda, IBIS Teleconference, 2/14

		     IBIS Open Forum Meeting Agenda
			      for 2/14/03

		 Bridge Number    Reservation #   Passcode
             1-916-356-2663        3          1805849

All meetings are 8:00 AM to 9:55 AM Pacific Time.  When you call into the 
meeting, ask for the IBIS Open Forum hosted by Stephen Peters and give the
Reservation Number and Passcode.

8:00 Check-In, Intros, Announcements                         Peters

     - Intros of New IBIS Participants, Meeting Quorum       Peters
     - Call for Patents                                      Peters
     - Membership Update and Treasurers Report               Peters
     - Review of Previous Meeting's Minutes (and ARs)        Peters
     - Miscellany/Announcements                              All
     - Press & Web Page Updates                              Huq, All
     - New Models Available, Library Update                  Leventhal, All
     - Opens for New Issues                                  All

8:15 Administrative and Project Discussions

     International/External Progress
     - IEC 62014-3 (ICEM) Integrated Circuits Electromagnetic 
       Model Proposal (IEC 93/67/NP IBIS and EMC Simulation) Perrin/Peters
     - JEDEC Activity Report                                 Green

     DesignCon2003 IBIS Summit Meeting Feedback              Peters

     DATE2003 European IBIS Summit Meeting Planning          Ross

     DAC2003 and DesignCon2003 East Meeting Propoasal        Peters

     IBIS Version 4.0 Parser Funding/Status                  Peters

     IBIS Quality Committee                                  Katz

     IBIS Model Review Committee                             Green

     New Administrative Issues                               All

8:45 Technical Discussion

     IBIS Connector and Futures Group Report                 Peters/Green

     BIRD80.1 - Add External Reference Column to Pin Mapping   Mirmak
                Keyword (vote)

     BIRD81.1 - Clarify Usage Rule for [Pin] I/O Model       Green/Wang
                Assignment (vote)

     BIRD74.2 - EMI Parameters                               de Burgh

     BIRD79 - Non-linear Buffer Impedance (extension to
              C_comp)
Muranyi/Giacotto

     ibischk3 Status                                         Ross
     - BUG71 - Monotonic Checking for Combined I-V Tables    Haller
     - BUG74 - Missing Timing Test Load Warning Messages     Haller
     - BUG78 - Clamp Current Double Counting Test            Leventhal/Ross

     New Technical Issues                                    All

9:50 Wrap Up and Next Meetings Plans                         Peters

9:55 Sign Off
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 7 Feb 2003 10:58:25 -0800 
From: "Angulo, John" <[email-masked]>
Subject: RE: [IBIS-Users] Question about warning message

The following is posted on behalf of Laxmi Vishwanathan of Lattice Semiconductor.  Please send any private replies to [email-masked] only.

- -----------------------------

Hi,
 I am trying to Get Lab Data for a GTL+ Buffer, would I need to terminate
the buffer ? If so, is there an IBIS spec for the termination vaule for GTL+
? How can I measure data for this kind of terminated buffer.
Thanks for the help.
Laxmi.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Thu, 13 Feb 2003 17:20:25 -0600
From: John Phillippe <[email-masked]>
Subject: [IBIS-Users] Buffer ramp rates & loading question.

Hello People,
   I have a few quick questions below:

1. I have gotten a few warnings about the power clamp values that never 
become zero. How can I fix the warnings?

WARNING - Model Pad_fc_drive10: POWER Clamp : Minimum value never
becomes zero

2. I have some slow I/O drivers that take a long time to settle for the
rising and falling curves. To help the curves settle faster, I want
to use 300 Ohms for the load. Normally I would use 50 Ohms load for the 
I/O drivers. I am wondering if I can use 300 Ohms load for the slow 
drivers?  Is it going to be a simulator problem if some of the buffers 
use 50 Ohm loads, and others 300 Ohms loads?

3. The keyword [Ramp] gives you the ramp rate on how long it takes the
output to switch from one state to another. It is define by 20% to 80%
voltage swing of the output to the time it takes to swing the voltage. 
What is the pin loading used for this measurement?

- -- 
John Phillippe
SPS, 32 Bit Embedded Controller Division, IC Creation
Motorola      -  512-895-1835
Austin, TX    -  [email-masked]

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 14 Feb 2003 08:30:25 +0100
From: Lenski Eckhard <[email-masked]>
Subject: AW: [IBIS-Users] Buffer ramp rates & loading question.

Hello John,

some quick answers

1) The powerclamp-curve should start at vcc with a value of 0mA; depending on your extraction method and the possibility that you might have  an internal pullup/pulldown (which will be added to the clamp-behavior) this could be the reason, that at vcc the  currentvalue isn't 0, but starts with e.g. 15uA or so. 

2) as far as I know, there will be no problem for the simulator, but why don't you support  waveforms for both r-fixture resistances ?( 4 waveforms with 50 ohm load  and  4 waveforms with 300 ohm load )

3) the loading for the ramp values are defined by the value of rload, which you have to support ( it is up to you to define the value, but the  default value is 50 ohm ). Furthermore ibis uses the termination scheme with rload to gnd for the rising ramp and rload to vcc for the falling ramp.

Regards 
Eckhard

Eckhard Lenski
Siemens AG
ICN M&L OP Bsl TDC TC3
Phone : 0049 89 722 27776
Fax     : 0049 89 722 44692
Email :  [email-masked]

- -----Ursprüngliche Nachricht-----
Von: John Phillippe [mailto:[email-masked]]
Gesendet: Freitag, 14. Februar 2003 00:20
An: [email-masked]
Betreff: [IBIS-Users] Buffer ramp rates & loading question.

Hello People,
   I have a few quick questions below:

1. I have gotten a few warnings about the power clamp values that never 
become zero. How can I fix the warnings?

WARNING - Model Pad_fc_drive10: POWER Clamp : Minimum value never
becomes zero

2. I have some slow I/O drivers that take a long time to settle for the
rising and falling curves. To help the curves settle faster, I want
to use 300 Ohms for the load. Normally I would use 50 Ohms load for the 
I/O drivers. I am wondering if I can use 300 Ohms load for the slow 
drivers?  Is it going to be a simulator problem if some of the buffers 
use 50 Ohm loads, and others 300 Ohms loads?

3. The keyword [Ramp] gives you the ramp rate on how long it takes the
output to switch from one state to another. It is define by 20% to 80%
voltage swing of the output to the time it takes to swing the voltage. 
What is the pin loading used for this measurement?

- -- 
John Phillippe
SPS, 32 Bit Embedded Controller Division, IC Creation
Motorola      -  512-895-1835
Austin, TX    -  [email-masked]

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 14 Feb 2003 14:14:49 -0600
From: John Phillippe <[email-masked]>
Subject: Re: [IBIS-Users] Buffer ramp rates & loading question.

Lynne Green wrote:

> 
> 2. I have some slow I/O drivers that take a long time to settle for the
> rising and falling curves. To help the curves settle faster, I want to
> use 300 Ohms for the load. Normally I would use 50 Ohms load for the I/O
> drivers. I am wondering if I can use 300 Ohms load for the slow drivers?
> Is it going to be a simulator problem if some of the buffers use 50 Ohm
> loads, and others 300 Ohms loads?
> 
> 
>>>V-t tables should be built with the nominal load you expect to see in
>>
> an actual PCB trace.  If the driver is intended for use with a wide
> range of trace impedances, you could build one set of V-t tables for the
> maximum load (say 300 Ohms), and another set of V-t tables for the
> minimum load (say 50 Ohms).  IBIS supports up to 100 waveform tables.
> 
>>>Simulators can use more than one set of V-t tables.  A model is
>>
> generally more accurate if one set of V-t tables is "near" the actual
> load.  (For example, if a driver could be used with any load from 50-300
> Ohms, one could build a set of V-t tables at 50, another at 300, and
> perhaps others in between.)

I remember a while back that some people on this group had recommended 
to just use the 50 ohm load and nothing else for V/T curves.  Now what I 
am sort of infering from the above post is to try and use a loading that 
would accurately represent how the chip will be used in a board 
environment.  So this brings up a few new questions.  FYI - I am using 
S2ibis2 for ibis creation.

1. I have been under the assumption that in an IBIS model, the I/V 
curves are what the simulator uses when doing board simulations.  The 
V/T curves are simply a nice little reference, but are not used for any 
simulations.  I.E.  If I set my ibis model up in a simulator and then 
put a bunch of 50 ohm loads to ground, and then simulate some edges, the 
V/T curves are just there to "double check" the simulations.  Is this a 
correct way of thinking?

2. If the above is correct, than it would make sense to add more than 
just the 50 ohm load models.  I would want to add capacitative loads and 
what not to simulate the original design specs. I.E.  If a buffer was 
designed to drive a 25pF load, than I would want to add that 25pF V/T 
curve for reference.

3. In the V/T curve section (of s2ibis2 scripts) you can add bond wire 
LRC values for the pin.  It seems to me that I should leave this blank 
when modeling, because when I put the chip together the LRC bond wire 
values will be placed up in the pin list, and I would be "double 
counting" the LRC values if I modeled them with the individual buffers 
and also put them in the PIN list of the ibis model.

Thanks for all the good information so far.

- -- 
John Phillippe
SPS, 32 Bit Embedded Controller Division, IC Creation
Motorola      -  512-895-1835
Austin, TX    -  [email-masked]

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Fri, 14 Feb 2003 13:04:26 -0800
From: "Peters, Stephen" <[email-masked]>
Subject: RE: [IBIS-Users] Buffer ramp rates & loading question.

Hi John:

  Actually, a simulator uses both the I-V and V-T tables to perform the
simulation. In brief, V-T tables describe how a buffer output transitions
from one state to another, and if all four recommended tables are included
then a simulator knows exactly how to turn on or off a pullup or pulldown
when transitioning from one output state to the next. The [Ramp] keyword
supplies somewhat the same information, but obviously the V-T curves are
more detailed.

You are correct that the curve produced by the V-T table data can be used as
a reference; i.e. the simulator should reproduce the V-T table data when
simulating the buffer into the load documented by the [Rising
Waveform]/[Falling Waveform] keywords. Adding, for example, a waveform of
the buffer driving a capacitive load might be useful, but the simulator will
probably not use it to create the model.  One still needs to include the
four waveforms into pure resistive loads.

On your third point you are correct - don't add the bond wire LRC data when
doing V-T extraction, or its effects will be double counted.

 Regards,
 Stephen Peters
 Intel Corp.

- -----Original Message-----
From: John Phillippe [mailto:[email-masked]] 
Sent: Friday, February 14, 2003 12:15 PM
To: [email-masked]
Subject: Re: [IBIS-Users] Buffer ramp rates & loading question.

Lynne Green wrote:

> 
> 2. I have some slow I/O drivers that take a long time to settle for 
> the rising and falling curves. To help the curves settle faster, I 
> want to use 300 Ohms for the load. Normally I would use 50 Ohms load 
> for the I/O drivers. I am wondering if I can use 300 Ohms load for the 
> slow drivers? Is it going to be a simulator problem if some of the 
> buffers use 50 Ohm loads, and others 300 Ohms loads?
> 
> 
>>>V-t tables should be built with the nominal load you expect to see in
>>
> an actual PCB trace.  If the driver is intended for use with a wide 
> range of trace impedances, you could build one set of V-t tables for 
> the maximum load (say 300 Ohms), and another set of V-t tables for the 
> minimum load (say 50 Ohms).  IBIS supports up to 100 waveform tables.
> 
>>>Simulators can use more than one set of V-t tables.  A model is
>>
> generally more accurate if one set of V-t tables is "near" the actual 
> load.  (For example, if a driver could be used with any load from 
> 50-300 Ohms, one could build a set of V-t tables at 50, another at 
> 300, and perhaps others in between.)

I remember a while back that some people on this group had recommended 
to just use the 50 ohm load and nothing else for V/T curves.  Now what I 
am sort of infering from the above post is to try and use a loading that 
would accurately represent how the chip will be used in a board 
environment.  So this brings up a few new questions.  FYI - I am using 
S2ibis2 for ibis creation.

1. I have been under the assumption that in an IBIS model, the I/V 
curves are what the simulator uses when doing board simulations.  The 
V/T curves are simply a nice little reference, but are not used for any 
simulations.  I.E.  If I set my ibis model up in a simulator and then 
put a bunch of 50 ohm loads to ground, and then simulate some edges, the 
V/T curves are just there to "double check" the simulations.  Is this a 
correct way of thinking?

2. If the above is correct, than it would make sense to add more than 
just the 50 ohm load models.  I would want to add capacitative loads and 
what not to simulate the original design specs. I.E.  If a buffer was 
designed to drive a 25pF load, than I would want to add that 25pF V/T 
curve for reference.

3. In the V/T curve section (of s2ibis2 scripts) you can add bond wire 
LRC values for the pin.  It seems to me that I should leave this blank 
when modeling, because when I put the chip together the LRC bond wire 
values will be placed up in the pin list, and I would be "double 
counting" the LRC values if I modeled them with the individual buffers 
and also put them in the PIN list of the ibis model.

Thanks for all the good information so far.

- -- 
John Phillippe
SPS, 32 Bit Embedded Controller Division, IC Creation
Motorola      -  512-895-1835
Austin, TX    -  [email-masked]

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked] with just 
|the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent  
| http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Mon, 17 Feb 2003 15:09:27 -0700
From: rrwolff <[email-masked]>
Subject: [IBIS-Users] [IBIS] Open forum minutes (02/14/03)

DATE: 02/17/03

SUBJECT: February 14, 2003 EIA IBIS Open Forum Meeting Minutes

VOTING MEMBERS AND 2003 PARTICIPANTS LIST:
Ansoft Corporation             (Eric Bracken)
Apple Computer                 Kim Helliwell
Applied Simulation Technology  Fred Balistreri
Cadence Design                 Lynne Green* 
Cisco Systems                  Syed Huq, Val Mandruson, Hung Pham 
Cypress Semiconductor          (Rajesh Manapat)
Huawei Technologies            (Jiang Xiang Zhong)
IBM                            (Pravin Patel)
Intel Corporation              Stephen Peters*, Michael Mirmak*,
                               Arpad Muranyi*
LSI Logic                      Frank Gasparik*
Matsushita (Panasonic)         Atsuji Ito
Mentor Graphics                Bob Ross*, Ian Dodd, Guy de Burgh*,
                               John Angulo*, Mike Donnelly, Weston Beal
Micron Technology              Randy Wolff*
Mitsubishi                     (Pat Hefferan)
Molex Incorporated             Gus Panella
Motorola                       (Rick Kingen)
National Semiconductor         Milt Schwartz*, Tim Coyle*
NEC Electric Corporation       (Itsuki Yamada)
North East Systems Associates  Edward Sayre 
Philips Semiconductor          (D.C. Sessions)
Quantic EMC                    (Mike Ventham)
Siemens (& Automotive) AG      Eckhard Lenski*
Signal Integrity Software      (Bob Haller), Barry Katz, Doug Burns
Sigrity                        Raj Raghuram
SiQual                         (Rob Hinz)
Texas Instruments              Thomas Fisher
Teraspeed                      Scott McMorrow, Tom Dagostino,
                               Kevin Simpson
Time Domain Analysis Systems   Dima Smolyansky, Steve Corey
Via Technologies               (Weber Chuang)
Zuken (& Incases)              (Michael Schaeder)

OTHER PARTICIPANTS IN 2003:
Brocade                        Frank Yuan, Yongrue Yu
Conexant                       Gary Felker
EMC Corporation                Brian Arsenault
Fujitsu                        Tadashi Arai
GEIA                           (Chris Denham)
Hitachi ULSI Systems           Kazuyoshi Shoji
Independent                    Kelly Green
NetLogic Microsystems          Eric Hsu
Plexus                         Joseph Socha
Xilinx                         Susan Wu

In the list above, attendees at the meeting are indicated by *.  Principal
members or other active members who have not attended are in parentheses.
Participants who no longer are in the organization are in square brackets.

Upcoming Meetings:  The bridge numbers for future IBIS teleconferences
are as follows:

  Date                Bridge Number    Reservation #    Passcode
  March 7, 2003       (916) 356-2663       4            9034377
  March 7, 2003       (no telephone bridge) - European IBIS Summit Meeting

All meetings are 8:00 AM to 9:55 AM Pacific Time.  We try to have agendas
out 7 days before each Open Forum, and meeting minutes out within 7 days
after.  When you call into the meeting, ask for the IBIS Open Forum hosted
by Stephen Peters and give the reservation number and passcode.

NOTE: "AR" = Action Required.

- -------------------------------- MINUTES -----------------------------------
INTRODUCTIONS AND MEETING QUORUM
Randy Wolff from Micron Technology is now serving as Secretary, taking
over from Guy de Burgh.

CALL FOR PATENTS
Stephen Peters called for any patents or pending patents related to the
IBIS Version 4.0 Standard. No companies declared a patent.

MEMBERSHIP UPDATE AND TREASURER'S REPORT
Stephen Peters reported that as of Thursday February 13, 2003 the EIA has
received eight IBIS dues payments. After the January 2003 summit, two more
invoices were sent out, bringing the total companies invoiced to 35. 

REVIEW OF MINUTES AND AR'S
The minutes of January 10, 2003 were approved without comment.

The minutes for the January 27, 2003 IBIS Summit Meeting were reissued
after Arpad Muranyi provided some technical corrections in the DATA
DEPENDENT BUFFER CHARACTERISTICS section as detailed below:

1)  Quote:  "A re-extraction and re-scaling of the common mode
currents got rid of the undershoot, ..."  should say:
"A re-extraction of the VT curves from the combined SPICE model
got rid of the undershoot, ..."

2)  Quote:  "Due to Miller capacitance, gate waveforms were coupling
to the outputs, and the amount of coupling was changing depending on
if the buffer was driving normal or de-emphasized data. Arpad was
able to match the final output waveforms closely with tedious fine
tuning, but he was not able to solve the DC level mismatch problem."

This should say:

"Due to Miller capacitance, the output waveforms were coupled to the
gate of the current source transistor, modulating the effective
drive strength of the buffer as a function of the buffer driving
normal or de-emphasized data.  Arpad was able to improve the model's
final output waveforms with tedious fine tuning, but he was not able
to match all aspects of the edge rates and the DC level mismatch
problem."

3)  The idea captured in "Arpad also pointed out that another way of  
modeling on-die power and ground capacitance is to use the [series cap]
keyword between two pins." was actually someone else's.  I believe Bob
Ross mentioned it first, so the credit should go to him.  (I only 
confirmed it).

4)  There is a small spelling error in "The bottom line is that this
effect is real, it cannot be models in traditional IBIS,..."
                             ^^^^^^
This should read:           "modeled"

The revised minutes were approved without comment.

ARs will be discussed during the meeting.

MISCELLANY/ANNOUNCEMENTS
Lynne Green presented a live seminar on January 29, 2003 on IBIS Model
Validation Methodology and demonstrated a typical flow. The presentation is 
available for download from the following URL:

  http://www.cadencepcb.com/webinar/Modeling2/frmModeling.asp

PRESS AND WEB PAGE UPDATES
Stephen Peters reported that Syed Huq has updated the IBIS roster page with
a new entry for Brocade Communications Systems, Inc.  

Bob Ross reported that the January 23, 2003 issue of EDN had IBIS mentioned
in "Automation Frees High-Speed Design", by David March, pp. 61-72 and (split
in two lines to avoid truncation):

  http://www.e-insite.net/ednmag/index.asp
  layout=article&stt=000&articleid=CA269865&pubdate=1%2F23%2F2003

Also, Bob mentioned that several papers at DesignCon 2003 mentioned or
discussed IBIS including "New IBIS Modeling Approaches for Internally
Terminated LVDS Buffers" by Mohammed Korany, Hazem Hegazy and Sherif
Hammad, and "Pad Capacitance Extraction Methodology for IBIS Modeling" by 
Hazem Hegazy.

NEW MODELS AVAILABLE, LIBRARY UPDATE
No new models reported.

OPENS FOR NEW ISSUES
Stephen Peters requested to add BUG79 to the agenda.

INTERNATIONAL/EXTERNAL PROGRESS
- - IEC 62014-3 (ICEM) Integrated Circuit Electromagnetic Model Proposal
  (formerly, IEC 93/67/NP IBIS and EMC Simulation) - No report.
- - JEDEC Activity Report
  Lynne Green reported that she would present two short courses on
  IBIS modeling at the JEDEX conference on March 24th. The URL for signup   
  is:

     http://www.jedex.org/  

  Lynne is presenting two seminars. Seminar A is entitled "An Introduction
  to IBIS Models and Model Validation." Seminar B is called "IBIS Models
  for High-Speed Interfaces."

  The cost is $349 for members of JEDEC and $399 for non-members.

DESIGNCON2003 IBIS SUMMIT MEETING FEEDBACK
Stephen Peters asked for any comments regarding the January 27, 2003 IBIS 
summit meeting held at DesignCon2003. Bob Ross remarked that there was a good
variety of papers, and though attendance was down there was still a full day
of presentations and activities. 

DATE2003 EUROPEAN IBIS SUMMIT MEETING PLANNING
Bob Ross reported on the European IBIS Summit.  This summit is held in
conjunction with the DATE 2003 conference in Munich Germany on Friday,
March 7, 2003. Because of travel restrictions, no one from the US has
obtained commitment to travel to Europe.  Ralf Bruening and the Zuken
team (who were co-sponsors along with Siemens AG and Mentor) have
volunteered to chair the meeting and take care of much of the logistics.  This
year the meeting will be held in a room at the International Congress Center
(ICM) where DATE 2003 is being held.  Bob noted that participants would have
to register for the DATE 2003 conference.

The first announcement went out on January 15, 2003 and the second on
February 5, 2003.

Bob does not have a specific agenda report at this time, but Eckhard 
Lenski stated that he knows of about seven possible presentations.  Seven
presentation will fill the 9:00 AM to 2:00 PM meeting time. Bob expects
about 30 people.  Lunch arrangements are still being worked out.

In follow-up to a question at the last teleconference, Stephen Peters has
read the EIA bylaws and determined that this meeting can be considered an
official IBIS summit meeting.

DAC2003 AND DESIGNCON2003 EAST MEETING PROPOSALS
Bob Ross mentioned that Ed Sayre is chairing a new DesignCon 2003 East
conference in Boston from June 23-25, 2003.  Originally the meeting was
going to be conducted at a hotel in Boston, but it appears that the location
will be changed to a "beltway" site outside of Boston and closer to the
industrial participants.  Holding a DesignCon meeting on the East coast
is partially motivated by the fact that, due to travel restrictions, the 
West coast DesignCon meeting is not drawing many East coast participants.
Much of the East coast meeting will consist of the best presentations given 
at the January 2003 meeting.  

Ed has invited the IBIS committee to hold a meeting there as we have done
for many years at the recent DesignCon2003 in Santa Clara.  Bob stated that
Barry Katz and the Signal Integrity Software team would be willing to chair
the meeting and provide some of the local support.  It is also very likely
that IBIS could be an Associate Sponsor of DesignCon2003 East, thus
obtaining a meeting room and other benefits.

Normally we hold our annual officer transition meeting along with the Design
Automation Conference.  This year we have tentatively scheduled this meeting
on Thursday, June 7, 2003 in Anaheim, California.

Stephen Peters asked if we should choose one location over the other, or 
if we should hold two IBIS summits.  Bob provided some considerations:

 - Since most of the IBIS officers are based on the West coast, it is not
 likely that many will get authorization to travel to the East coast.
 However, the West Coast meeting may cost more money because we will have to
 pay for the meeting room.
 
 - It is to the advantage of IBIS to be geographically diverse and leverage
 off of East Coast activity.  We already hold an IBIS East Summit associated
 with PCB East Conference in the September, October time frame.

 - Finally, Bob noted that it might be possible to hold two meetings and 
 set up a phone line for webcasting presentations to the DesignCon2003 East 
 meeting.  In fact some presentations at the DAC2003 IBIS Summit could be
 repeated.  If this was done, a full DesignCon2003 East Meeting would not 
 provide any significant logistical inconvenience and would still serve the 
 East Coast IBIS community.  In fact, the West Coast folks could also 
 teleconference in, and the IBIS Chair could conduct the meeting. 

Tim Coyle remarked that it would be good to do the East coast meeting for 
those that couldn't attend DAC.  Lynne Green asked about the balance of
participation between east coast and west coast.  Stephen replied that
their are active IBIS participants on both coasts. Stephen also remarked
that he sees little downside to committing to the DesignCon East meeting.

After further discussion the group reached a consensus that we should
make plans to hold a summit meeting at DesignCon2003.  No decision was
reached on whether or not to also have a summit at DAC.  Lynne remarked
that we need to reach a decision soon so folks can start making their
travel requests.

IBIS VERSION 4.0 PARSER FUNDING AND STATUS
Stephen Peters reported that the EIA has received IBIS 4.0 parser payments
from two companies, however, six more companies have indicated that they are
processing the paperwork. In addition, Stephen reported that Atul Agarwal
has completed implementing the [Receiver Threshold]/[External Reference]
keywords and should have the [Alternate Package Models], C_comp and the 
expanded V-T table limits done by mid-February.

IBIS QUALITY COMMITTEE
Lynne Green reported that the IBIS Quality Committee met on Jan 21, 2003
and again on Feb 11, 2003. They will be meeting again on Feb 25, 2003. They 
are still reviewing documents. 

IBIS MODEL REVIEW COMMITTEE
Lynne Green reported no new models to review.

NEW ADMINISTRATIVE ISSUES
None.

IBIS FUTURES AND CONNECTOR WORKING GROUP REPORT
Stephen Peters reported that the IBIS futures and connector working group 
met February 6, 2003 and again on February 13, 2003 to resolve the issues
raised by Michael Mirmak and Kelly Green and captured at the January 2003
Summit Meeting.  Stephen stated that the futures committee has made very good
progress, resolving all but three of the editorial and clarification issues.
The futures working group will meet again February 19, 2003 to resolve
these last three issues.  Stephen expects the working group to issue a
revised draft 1.0 ICM specification for consideration by the full IBIS Open
Forum sometime in early March. 

BIRD80.1 - Add External Reference Column to Pin Mapping Keyword
There was no further discussion, so Stephen Peters called for a vote.
A motion to accept BIRD80.1 passed unanimously.

BIRD81.1 -  Clarify Usage Rule for [Pin] I/O Model Assignment
Bob Ross reported that BIRD81.1 was uploaded, adding the editorial changes to
BIRD81 that were identified in the January 10, 2003 teleconference.
Arpad Muranyi noted a typo in the 'Statement of Issues,' but there was no 
discussion on the BIRD itself.  Stephen Peters called for a vote, and a motion
to accept BIRD81.1 passed unanimously. 

BIRD74.2 - EMI Parameters
BIRD79 - Non-linear buffer impedance (extension to C_comp)
Discussion on these BIRDS was deferred.

IBISCHK3 & BUG TRACKING STATUS

- - BUG71 - Monotonic Checking for Combined I-V Tables
  Bob Ross has been discussing the clarification of I-V table combinations 
  with Bob Haller. Further discussion was deferred until the next meeting. 
- - BUG74 - Missing Timing Test Load Warning Messages
  Greg Edlund has updated this bug with clarification of assumed default
  values for Cref, Vref, etc.  Further action is postponed until the 
  rest of the Open Forum has had a chance to review the contents of the
  bug report.
- - BUG78 - Clamp Current Double Counting Test
  While this bug has a test case, it is still incomplete as to the bug 
  specifics and how to detect the reported error.  Bob Ross noted that this
  bug is data specific and may be beyond the scope of what the parser can
  detect. Bob proposed that unless the originator or quality committee can
  suggest a test for Clamp current double counting by the next 
  teleconference, we should close this bug with a status of "will not fix".
- - BUG79 - Parser Crashes on [Submodel Spec]
  Matthew Flora submitted this bug for consideration. In brief, the issue
  is that if the parser encounters an unrecognized subparameter under the
  [Submodel Spec] keyword, it crashes.  Matthew has identified the problem
  and has submitted a solution.  This bug is classified as Severe, Medium,
  and Will Fix. 

NEXT MEETING:
The next teleconference meeting is scheduled for March 7, 2003 from
8:00 AM to 10:00 AM Pacific time.  

The next summit meeting is the European IBIS Summit Meeting on 
March 7, 2003. No phone bridge or webcast is planned.

============================================================================

                                      NOTES

IBIS CHAIR: Stephen Peters (503) 264-4108, Fax: (503) 264-1831
            [email-masked]
            Senior Hardware Engineer, Intel Corporation
            M/S JF4-215
            2111 NE 25th Ave.
            Hillsboro, OR 97124-5961

VICE CHAIR: Lynne Green (425) 788-0412, Fax: (425) 788-4289
            [email-masked]
            Senior Modeling Engineer, Cadence Design Systems
            20 120th Ave NE, Suite 103, Bellevue, WA 98005-3016

SECRETARY:  Randy Wolff (208) 363-1764, Fax: (208) 368-3475
            [email-masked]
            Simulation Engineer, Micron Technology, Inc.
            8000 S. Federal Way
            Mail Stop: 711
            Boise, ID 83707-0006
        
LIBRARIAN:  Roy Leventhal (847) 590-9398
            [email-masked]
            Consultant, Leventhal Design and Communications
            1924 North Burke Drive
            Arlington Heights, Illinois 60004

WEBMASTER:  Syed Huq (408) 525-3399, Fax: (408) 526-5504
            [email-masked]
            Manager, Hardware Engineering, Cisco Systems
            170 West Tasman Drive
            San Jose, CA 95134-1706

POSTMASTER: John Angulo (425) 497-5077, Fax: (425) 881-1008
            [email-masked]
            Development Engineer, Mentor Graphics
            14715 N.E. 95th Street, Suite 200
            Redmond, WA 98052

This meeting was conducted in accordance with the EIA Legal Guides and EIA
Manual of Organization and Procedure.

The following e-mail addresses are used:

  [email-masked]
      In the body, for the IBIS Open Forum Reflector:
      subscribe ibis <your e-mail address>

      In the body, for the IBIS Users' Group Reflector:
      subscribe ibis-users <your e-mail address>

      Help and other commands:
      help

  [email-masked]
      To join, change, or drop from either the IBIS Open Forum Reflector
      ([email-masked]), the IBIS Users' Group Reflector ([email-masked])
      or both.  State your request.

  [email-masked]
      To obtain general information about IBIS, to ask specific questions
      for individual response, and to inquire about joining the EIA-IBIS
      Open Forum as a full Member.

  [email-masked]
      To send a message to the general IBIS Open Forum Reflector.  This
      is used mostly for IBIS Standardization business and future IBIS
      technical enhancements.  Job posting information is not permitted.

  [email-masked]
      To send a message to the IBIS Users' Group Reflector.  This is
      used mostly for IBIS clarification, current modeling issues, and
      general user concerns.  Job posting information is not permitted.

  [email-masked]
      To report ibischk2/3 parser bugs.  The Bug Report Form Resides on
      eda.org in /pub/ibis/bugs/ibischk/bugform.txt along with reported
      bugs.

      To report s2ibis, s2ibis2 and s2iplt bugs, use the Bug Report Forms
      which reside under eda.org in /pub/ibis/bugs/s2ibis/bugs2i.txt,
      /pub/ibis/bugs/s2ibis2/bugs2i2.txt, and
      /pub/ibis/bugs/s2iplt/bugsplt.txt respectively.

Information on IBIS technical contents, IBIS participants, and actual
IBIS models are available on the IBIS Home page found by selecting the
Electronic Information Group under:

  http://www.eigroup.org/ibis/ibis.htm

Check the pub/ibis directory on eda.org for more information on previous
discussions and results.  You can get on via FTP anonymous.

============================================================================

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 18 Feb 2003 18:00:35 +0530
From: Anshuli Goel <[email-masked]>
Subject: [IBIS-Users] ERROR in IBIS model

Hi IBIS Gurus

While compiling the IBIS model in ichk3 I am getting this error

ERROR - Model tristate_driver: The [Rising Waveform]
      with [R_fixture]=50 Ohms and [V_fixture_max]=0V
      has MAX column DC endpoints of  0.00V and  2.04v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages (-0.90V and  3.15V),
      a difference of -100.00% and 35.17%, respectively.
ERROR - Model tristate_driver: The [Rising Waveform]
      with [R_fixture]=50 Ohms and [V_fixture_max]=3.6V
      has MAX column DC endpoints of  1.01V and  3.60v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages (-0.90V and  3.60V),
      a difference of -212.22% and  0.00%, respectively.
ERROR - Model tristate_driver: The [Falling Waveform]
      with [R_fixture]=50 Ohms and [V_fixture_max]=3.6V
      has MAX column DC endpoints of  1.01V and  3.60v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages (-0.90V and  3.60V),
      a difference of -212.22% and  0.00%, respectively.
ERROR - Model tristate_driver: The [Falling Waveform]
      with [R_fixture]=50 Ohms and [V_fixture_max]=0V
      has MAX column DC endpoints of  0.00V and  2.04v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages (-0.90V and  3.15V),
      a difference of -100.00% and 35.17%, respectively.

I don't understand this error and cause for this . Please help me out.

Regards
Anshuli

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

Date: Tue, 18 Feb 2003 18:32:22 +0530
From: Anshuli Goel <[email-masked]>
Subject: Re: [IBIS-Users] ERROR in IBIS model

- --------------0121A56684CCD5256AA2C438
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Attached is the control file that I am using for this. I have defined only
one corner .
| data0 -  TFP501 DATA BUFFER : tristatable output buffer, with ST=0.
|

|
| Specify the IBIS version and file revision number.
|
[IBIS Ver]  2.1
[File rev]   0
[File name]     ubt062.ibs

|[Clean up]
[Clamp tolerance] 0
|
| Add some comments to identify the file.
|
[date]  Jan 29, 2002
[source] From TFP501 DATA BUFFER spice models

[Disclaimer] Please be aware that in the absence of a written agreement
+Texas Instruments(TI) assumes no liability for:
+(1) The accuracy of the IBIS models provided to your company
+(2) The proper functioning of these Models in your design
+    or for any resulting applications;or
+(3)Infringement of patents,copyrights or intellectual
+   property rights resulting from your use of these models.
+ TI provides IBIS Models as a service to our customers and
+ therefore reserves the right to limit distribution of the
+ Models.

[Copyright] Property of Texas Instruments Incorporated.
+Unauthorised reproduction and/or distribution is strictly prohibited.
+This product is protected under copyright law and trade
+secret law as an unpublished work.
+Created 2000,(C) Copyright 2000,Texas Instruments Inc.,
+All Rights Reserved.These commodities are under the U.S.
+Government distribution license control.As such,they are not
+to be re-exported without the prior approval of the U.S.
+Department of Commerce.

|
| Give the spice type.  Allowable values are hspice, pspice, spice2,
| spice3 and spectre.
|
[Spice type]  spice2
[Spice command] "spice3  -tmp /tmp -init /dev/null %s %s /dev/null >%s
2>&1"

|
| Now specify some global parameters. These parameters will apply to
| _all_ the models in this file.
|
| Note on the [Temperature range] keyword: Since this is a CMOS circuit,
| the min column contains the highest temperature, since this temperature
| causes or amplifies the "min" (slow, weak) behavior, while the max
| column contains the lowest temperature, since this temperature causes or
| amplifies the "max" (fast, strong) behavior.  If this were a bipolar
| circuit, these temperature values would be reversed.
|
[temperature range] 0 0 0
[voltage range] 3.6 3.6 3.6
[sim time] 10ns
[vil] 0 0 0
[vih] 1.65 1.65 1.65
[rload] 50
[Tr]  1n 1n 1n
[Tf]  1n 1n 1n

|
| Specify the default pin parasitics
|
|[R_pkg]   0.1  0.097 0.123
|[L_pkg]   1.5nH 2.0nH  2.5nH
|[C_pkg]   1.5pF   1.0pF   2.0pF
[C_comp]       0.046pf 0.046pf 0.046pf

|
| Component Description
|
[Component] OUTPUT DRIVER
[manufacturer] Texas Instruments

|
| Specify the SPICE file where the circuit is located.
|
| ST made high in the SPICE netlist
|
|
[Spice file] UBT062.spi

|
| Now specify the pin list.  Since we're just creating an IBIS file for
| the driver, we'll use a very short pin list.
|
| The pin list formats can be found in doc/s2ibis2.txt.  Briefly, the
| first line of each pin is of the form
|
|  pin_name  spice_node  signal_name  model_name
|
| If a pin description has more than one line (e.g. the first pin in the
| pin list below), the second line is of the form
|
| -> input_pin  enable_pin
|
| Note that the second line must begin with the symbol "->".
[Pin]
Y Y3 Y tristate_driver
- -> A GZ
A A A dummy
GZ GZ GZ dummy
VDDS VDDS VDDS POWER
VSSS VSSS VSSS GND

|
| Now we give the particulars of the model "tristate_driver".  It is of
| type "3-State" (allowable types may be found in doc/s2ibis2.txt) and is
| non-inverting. We want to use models from the file "spectre.mod" for
| typ, min and max simulations, and we want to include both a rising and
| falling waveform in our IBIS model. Both the rising and falling
| wveforms have a 500 ohm load; the rising waveform has the load
| grounded, while the falling waveform has the load connected to 3.3V.
| Neither waveform includes any other test fixture or package parasitics.
|
[Model] tristate_driver
[Model type] 3-state
[Polarity] Non-inverting
[Enable] active-low
[Model file] strong strong strong
[Rising waveform]  50 0 0 0  NA NA NA NA NA
[Rising waveform]  50 3.6 3.6 3.6  NA NA NA NA NA
[Falling waveform] 50 3.6 3.6 3.6 NA NA NA NA NA
[Falling waveform] 50 0 0 0  NA NA NA NA NA
|[Vmeas] 1.5

|
| Now specify stuff for the model "input".
[Model]  dummy
[nomodel]
  ------------------------------------------------------------------------

IBIS model

|************************************************************************
| IBIS file ubt062.ibs created by s2ibis2 version 1.1
| North Carolina State University Electronics Research Laboratory  1995
|************************************************************************
|
[IBIS ver]       2.1
[File name]      ubt062.ibs
[File Rev]       0
[Date]           Jan 29, 2002
[Source]         From TFP501 DATA BUFFER spice models
[Disclaimer]     Please be aware that in the absence of a written agreement

                 Texas Instruments(TI) assumes no liability for: (1) The
                 accuracy of the IBIS models provided to your company (2)
The
                 proper functioning of these Models in your design or for
any
                 resulting applications;or (3)Infringement of
                 patents,copyrights or intellectual property rights
resulting
                 from your use of these models. TI provides IBIS Models as
a
                 service to our customers and therefore reserves the right
to
                 limit distribution of the Models.
[Copyright]      Property of Texas Instruments Incorporated. Unauthorised
                 reproduction and/or distribution is strictly prohibited.
This
                 product is protected under copyright law and trade secret
law
                 as an unpublished work. Created 2000,(C) Copyright
2000,Texas
                 Instruments Inc., All Rights Reserved.These commodities
are
                 under the U.S. Government distribution license control.As
                 such,they are not to be re-exported without the prior
approval
                 of the U.S. Department of Commerce.
|
|************************************************************************
|                        Component OUTPUT DRIVER
|************************************************************************
|
[Component]      OUTPUT DRIVER
[Manufacturer]   Texas Instruments
[Package]
| variable       typ                 min                 max
R_pkg            0.000               0.000               0.000
L_pkg            0.000H              0.000H              0.000H
C_pkg            0.000F              0.000F              0.000F
|
[Pin]  signal_name          model_name           R_pin     L_pin     C_pin
Y      Y                    tristate_driver
| A    A                    dummy
| GZ   GZ                   dummy
VDDS   VDDS                 POWER
VSSS   VSSS                 GND
|
|************************************************************************
|                         Model tristate_driver
|************************************************************************
|
[Model]          tristate_driver
Model_type       3-state
Polarity         Non-Inverting
Enable           Active-Low
C_comp           46.00fF             46.00fF             46.00fF
|
|
[Temperature Range]       0.000               0.000               0.000
[Voltage Range]           3.60V               3.60V               3.60V
[Pulldown]
| voltage     I(typ)              I(min)              I(max)
|
  -3.60       -0.50mA             -0.50mA             -0.50mA
  -3.30       -0.57mA             -0.57mA             -0.57mA
  -3.00       -0.66mA             -0.66mA             -0.66mA
  -2.70       -0.79mA             -0.79mA             -0.79mA
  -2.40       -0.97mA             -0.97mA             -0.97mA
  -2.10       -1.26mA             -1.26mA             -1.26mA
  -1.80       -1.79mA             -1.79mA             -1.79mA
  -1.50       -3.02mA             -3.02mA             -3.02mA
  -1.20       -8.26mA             -8.26mA             -8.26mA
  -0.90      -42.48mA            -42.48mA            -42.48mA
  -0.90      -42.48mA            -42.48mA            -42.48mA
  -0.80      -42.27mA            -42.27mA            -42.27mA
  -0.70      -39.43mA            -39.43mA            -39.43mA
  -0.60      -35.54mA            -35.54mA            -35.54mA
  -0.50      -30.28mA            -30.28mA            -30.28mA
  -0.40      -24.44mA            -24.44mA            -24.44mA
  -0.30      -18.46mA            -18.46mA            -18.46mA
  -0.20      -12.39mA            -12.39mA            -12.39mA
  -0.10       -6.24mA             -6.24mA             -6.24mA
   0.00        0.35nA              0.35nA              0.35nA
   0.10        6.17mA              6.17mA              6.17mA
   0.20       12.11mA             12.11mA             12.11mA
   0.30       17.83mA             17.83mA             17.83mA
   0.40       23.32mA             23.32mA             23.32mA
   0.50       28.58mA             28.58mA             28.58mA
   0.60       33.62mA             33.62mA             33.62mA
   0.70       38.42mA             38.42mA             38.42mA
   0.80       42.98mA             42.98mA             42.98mA
   0.90       47.31mA             47.31mA             47.31mA
   1.00       51.40mA             51.40mA             51.40mA
   1.10       55.25mA             55.25mA             55.25mA
   1.20       58.85mA             58.85mA             58.85mA
   1.30       62.21mA             62.21mA             62.21mA
   1.40       65.32mA             65.32mA             65.32mA
   1.50       68.17mA             68.17mA             68.17mA
   1.60       70.77mA             70.77mA             70.77mA
   1.70       73.10mA             73.10mA             73.10mA
   1.80       75.14mA             75.14mA             75.14mA
   1.90       76.86mA             76.86mA             76.86mA
   2.00       78.18mA             78.18mA             78.18mA
   2.10       79.13mA             79.13mA             79.13mA
   2.20       79.79mA             79.79mA             79.79mA
   2.30       80.27mA             80.27mA             80.27mA
   2.40       80.63mA             80.63mA             80.63mA
   2.50       80.92mA             80.92mA             80.92mA
   2.60       81.17mA             81.17mA             81.17mA
   2.70       81.38mA             81.38mA             81.38mA
   2.80       81.56mA             81.56mA             81.56mA
   2.90       81.73mA             81.73mA             81.73mA
   3.00       81.88mA             81.88mA             81.88mA
   3.10       82.03mA             82.03mA             82.03mA
   3.20       82.16mA             82.16mA             82.16mA
   3.30       82.29mA             82.29mA             82.29mA
   3.40       82.41mA             82.41mA             82.41mA
   3.50       82.52mA             82.52mA             82.52mA
   3.60       82.64mA             82.64mA             82.64mA
   3.70       82.75mA             82.75mA             82.75mA
   3.80       82.86mA             82.86mA             82.86mA
   3.90       82.97mA             82.97mA             82.97mA
   4.00       83.08mA             83.08mA             83.08mA
   4.10       83.19mA             83.19mA             83.19mA
   4.20       83.50mA             83.50mA             83.50mA
   4.30       84.03mA             84.03mA             84.03mA
   4.40       83.64mA             83.64mA             83.64mA
   4.50       83.85mA             83.85mA             83.85mA
   4.60       84.09mA             84.09mA             84.09mA
   4.70       84.35mA             84.35mA             84.35mA
   5.00       85.25mA             85.25mA             85.25mA
   5.30       86.39mA             86.39mA             86.39mA
   5.60       87.87mA             87.87mA             87.87mA
   5.90       89.74mA             89.74mA             89.74mA
   6.20       92.09mA             92.09mA             92.09mA
   6.50       94.97mA             94.97mA             94.97mA
   6.80       98.43mA             98.43mA             98.43mA
   7.10        0.10A               0.10A               0.10A
  -1.00       -3.50A              -0.96A              -0.96A
   7.20        0.10A               0.10A               0.10A
|
[Pullup]
| voltage     I(typ)              I(min)              I(max)
|
  -3.60        0.12A               0.12A               0.12A
  -3.30        0.11A               0.11A               0.11A
  -3.00       95.23mA             95.23mA             95.23mA
  -2.70       84.49mA             84.49mA             84.49mA
  -2.40       73.79mA             73.79mA             73.79mA
  -2.10       63.18mA             63.18mA             63.18mA
  -1.80       52.74mA             52.74mA             52.74mA
  -1.50       43.30mA             43.30mA             43.30mA
  -1.20       34.49mA             34.49mA             34.49mA
  -0.90       25.71mA             25.71mA             25.71mA
  -0.90       25.71mA             25.71mA             25.71mA
  -0.80       22.79mA             22.79mA             22.79mA
  -0.70       19.89mA             19.89mA             19.89mA
  -0.60       17.02mA             17.02mA             17.02mA
  -0.50       14.14mA             14.14mA             14.14mA
  -0.40       11.38mA             11.38mA             11.38mA
  -0.30        8.61mA              8.61mA              8.61mA
  -0.20        5.74mA              5.74mA              5.74mA
  -0.10        2.87mA              2.87mA              2.87mA
   0.00        0.12nA              0.12nA              0.12nA
   0.10       -2.85mA             -2.85mA             -2.85mA
   0.20       -5.68mA             -5.68mA             -5.68mA
   0.30       -8.47mA             -8.47mA             -8.47mA
   0.40      -11.24mA            -11.24mA            -11.24mA
   0.50      -13.98mA            -13.98mA            -13.98mA
   0.60      -16.69mA            -16.69mA            -16.69mA
   0.70      -19.37mA            -19.37mA            -19.37mA
   0.80      -22.01mA            -22.01mA            -22.01mA
   0.90      -24.62mA            -24.62mA            -24.62mA
   1.00      -27.20mA            -27.20mA            -27.20mA
   1.10      -29.74mA            -29.74mA            -29.74mA
   1.20      -32.25mA            -32.25mA            -32.25mA
   1.30      -34.72mA            -34.72mA            -34.72mA
   1.40      -37.15mA            -37.15mA            -37.15mA
   1.50      -39.54mA            -39.54mA            -39.54mA
   1.60      -41.90mA            -41.90mA            -41.90mA
   1.70      -44.21mA            -44.21mA            -44.21mA
   1.80      -46.47mA            -46.47mA            -46.47mA
   1.90      -48.69mA            -48.69mA            -48.69mA
   2.00      -50.87mA            -50.87mA            -50.87mA
   2.10      -53.00mA            -53.00mA            -53.00mA
   2.20      -55.07mA            -55.07mA            -55.07mA
   2.30      -57.10mA            -57.10mA            -57.10mA
   2.40      -59.07mA            -59.07mA            -59.07mA
   2.50      -60.99mA            -60.99mA            -60.99mA
   2.60      -62.84mA            -62.84mA            -62.84mA
   2.70      -64.64mA            -64.64mA            -64.64mA
   2.80      -66.37mA            -66.37mA            -66.37mA
   2.90      -68.04mA            -68.04mA            -68.04mA
   3.00      -69.64mA            -69.64mA            -69.64mA
   3.10      -71.17mA            -71.17mA            -71.17mA
   3.20      -72.62mA            -72.62mA            -72.62mA
   3.30      -74.01mA            -74.01mA            -74.01mA
   3.40      -75.31mA            -75.31mA            -75.31mA
   3.50      -76.55mA            -76.55mA            -76.55mA
   3.60      -77.72mA            -77.72mA            -77.72mA
   3.70      -78.81mA            -78.81mA            -78.81mA
   3.80      -79.85mA            -79.85mA            -79.85mA
   3.90      -80.83mA            -80.83mA            -80.83mA
   4.00      -81.75mA            -81.75mA            -81.75mA
   4.10      -82.61mA            -82.61mA            -82.61mA
   4.20      -83.43mA            -83.43mA            -83.43mA
   4.30      -84.23mA            -84.23mA            -84.23mA
   4.40      -85.34mA            -85.34mA            -85.34mA
   4.50      -87.68mA            -87.68mA            -87.68mA
   4.60      -91.48mA            -91.48mA            -91.48mA
   4.70      -97.30mA            -97.30mA            -97.30mA
   5.00       -0.17A              -0.17A              -0.17A
   5.30       -0.28A              -0.28A              -0.28A
   5.60       -0.39A              -0.39A              -0.39A
   5.90       -0.50A              -0.50A              -0.50A
   6.20       -0.62A              -0.62A              -0.62A
   6.50       -0.73A              -0.73A              -0.73A
   6.80       -0.84A              -0.84A              -0.84A
   7.10       -0.96A              -0.96A              -0.96A
   0.00       0.000A              0.000A              0.000A
   7.20       -1.00A              -1.00A              -1.00A
|
[GND_clamp]
| voltage     I(typ)              I(min)              I(max)
|
  -3.60       -1.00A              -1.00A              -1.00A
  -3.50       -0.96A              -0.96A              -0.96A
  -3.40       -0.92A              -0.92A              -0.92A
  -3.30       -0.88A              -0.88A              -0.88A
  -3.20       -0.84A              -0.84A              -0.84A
  -3.10       -0.80A              -0.80A              -0.80A
  -3.00       -0.77A              -0.77A              -0.77A
  -2.90       -0.73A              -0.73A              -0.73A
  -2.80       -0.69A              -0.69A              -0.69A
  -2.70       -0.65A              -0.65A              -0.65A
  -2.60       -0.61A              -0.61A              -0.61A
  -2.50       -0.58A              -0.58A              -0.58A
  -2.40       -0.54A              -0.54A              -0.54A
  -2.30       -0.50A              -0.50A              -0.50A
  -2.20       -0.46A              -0.46A              -0.46A
  -2.10       -0.43A              -0.43A              -0.43A
  -2.00       -0.39A              -0.39A              -0.39A
  -1.90       -0.35A              -0.35A              -0.35A
  -1.80       -0.31A              -0.31A              -0.31A
  -1.70       -0.28A              -0.28A              -0.28A
  -1.60       -0.24A              -0.24A              -0.24A
  -1.50       -0.20A              -0.20A              -0.20A
  -1.40       -0.17A              -0.17A              -0.17A
  -1.30       -0.13A              -0.13A              -0.13A
  -1.20      -95.41mA            -95.41mA            -95.41mA
  -1.10      -62.02mA            -62.02mA            -62.02mA
  -1.00      -32.45mA            -32.45mA            -32.45mA
  -0.90      -13.17mA            -13.17mA            -13.17mA
  -0.80       -6.39mA             -6.39mA             -6.39mA
  -0.70       -2.78mA             -2.78mA             -2.78mA
  -0.60       -0.68mA             -0.68mA             -0.68mA
  -0.50      -69.97uA            -69.97uA            -69.97uA
  -0.40       -3.65uA             -3.65uA             -3.65uA
  -0.30       -0.11uA             -0.11uA             -0.11uA
  -0.20       -5.21nA             -5.21nA             -5.21nA
  -0.10       -2.44nA             -2.44nA             -2.44nA
   0.00       -2.13nA             -2.13nA             -2.13nA
   0.10       -1.89nA             -1.89nA             -1.89nA
   0.20       -1.68nA             -1.68nA             -1.68nA
   0.30       -1.49nA             -1.49nA             -1.49nA
   0.40       -1.32nA             -1.32nA             -1.32nA
   0.50       -1.17nA             -1.17nA             -1.17nA
   0.60       -1.02nA             -1.02nA             -1.02nA
   0.70       -0.89nA             -0.89nA             -0.89nA
   0.80       -0.78nA             -0.78nA             -0.78nA
   0.90       -0.67nA             -0.67nA             -0.67nA
   1.00       -0.57nA             -0.57nA             -0.57nA
   1.10       -0.48nA             -0.48nA             -0.48nA
   1.20       -0.40nA             -0.40nA             -0.40nA
   1.30       -0.33nA             -0.33nA             -0.33nA
   1.40       -0.26nA             -0.26nA             -0.26nA
   1.50       -0.20nA             -0.20nA             -0.20nA
   1.60       -0.14nA             -0.14nA             -0.14nA
   1.70      -92.03pA            -92.03pA            -92.03pA
   1.80      -44.85pA            -44.85pA            -44.85pA
   1.90       -1.42pA             -1.42pA             -1.42pA
   2.00       38.68pA             38.68pA             38.68pA
   2.10       75.84pA             75.84pA             75.84pA
   2.20        0.11nA              0.11nA              0.11nA
   2.30        0.14nA              0.14nA              0.14nA
   2.40        0.17nA              0.17nA              0.17nA
   2.50        0.20nA              0.20nA              0.20nA
   2.60        0.23nA              0.23nA              0.23nA
   2.70        0.25nA              0.25nA              0.25nA
   2.80        0.28nA              0.28nA              0.28nA
   2.90        0.30nA              0.30nA              0.30nA
   3.00        0.32nA              0.32nA              0.32nA
   3.10        0.34nA              0.34nA              0.34nA
   3.20        0.36nA              0.36nA              0.36nA
   3.30        0.37nA              0.37nA              0.37nA
   3.40        0.38nA              0.38nA              0.38nA
   3.50        0.40nA              0.40nA              0.40nA
   3.60        0.56nA              0.56nA              0.56nA
|
[POWER_clamp]
| voltage     I(typ)              I(min)              I(max)
|
  -3.60        3.00mA              3.00mA              3.00mA
  -3.50        2.89mA              2.89mA              2.89mA
  -3.40        2.78mA              2.78mA              2.78mA
  -3.30        2.67mA              2.67mA              2.67mA
  -3.20        2.56mA              2.56mA              2.56mA
  -3.10        2.46mA              2.46mA              2.46mA
  -3.00        2.35mA              2.35mA              2.35mA
  -2.90        2.24mA              2.24mA              2.24mA
  -2.80        2.14mA              2.14mA              2.14mA
  -2.70        2.03mA              2.03mA              2.03mA
  -2.60        1.93mA              1.93mA              1.93mA
  -2.50        1.82mA              1.82mA              1.82mA
  -2.40        1.72mA              1.72mA              1.72mA
  -2.30        1.62mA              1.62mA              1.62mA
  -2.20        1.53mA              1.53mA              1.53mA
  -2.10        1.43mA              1.43mA              1.43mA
  -2.00        1.34mA              1.34mA              1.34mA
  -1.90        1.25mA              1.25mA              1.25mA
  -1.80        1.15mA              1.15mA              1.15mA
  -1.70        1.06mA              1.06mA              1.06mA
  -1.60        0.97mA              0.97mA              0.97mA
  -1.50        0.88mA              0.88mA              0.88mA
  -1.40        0.78mA              0.78mA              0.78mA
  -1.30        0.69mA              0.69mA              0.69mA
  -1.20        0.60mA              0.60mA              0.60mA
  -1.10        0.51mA              0.51mA              0.51mA
  -1.00        0.42mA              0.42mA              0.42mA
  -0.90        0.33mA              0.33mA              0.33mA
  -0.80        0.25mA              0.25mA              0.25mA
  -0.70        0.16mA              0.16mA              0.16mA
  -0.60       85.73uA             85.73uA             85.73uA
  -0.50        0.68mA              0.68mA              0.68mA
  -0.40        0.25mA              0.25mA              0.25mA
  -0.30        8.01uA              8.01uA              8.01uA
  -0.20       68.87nA             68.87nA             68.87nA
  -0.10        3.39nA              3.39nA              3.39nA
   0.00        0.56nA              0.56nA              0.56nA
|
[Ramp]
| variable       typ                 min                 max
dV/dt_r          0.83/0.74n          0.83/0.74n          0.83/0.74n
dV/dt_f          1.11/0.79n          1.11/0.79n          1.11/0.79n
R_load = 25.00
|
[Rising Waveform]
R_fixture = 25.00
V_fixture = 0.000
V_fixture_min = 0.000
V_fixture_max = 0.000
| time           V(typ)              V(min)              V(max)
|
  0.000S         17.33nV             17.33nV             17.33nV
   0.20nS        17.84nV             17.84nV             17.84nV
   0.40nS        17.67nV             17.67nV             17.67nV
   0.60nS         1.29uV              1.29uV              1.29uV
   0.80nS        17.99uV             17.99uV             17.99uV
   1.00nS        53.27mV             53.27mV             53.27mV
   1.20nS         0.23V               0.23V               0.23V
   1.40nS         0.59V               0.59V               0.59V
   1.60nS         0.75V               0.75V               0.75V
   1.80nS         0.84V               0.84V               0.84V
   2.00nS         1.09V               1.09V               1.09V
   2.20nS         1.35V               1.35V               1.35V
   2.40nS         1.37V               1.37V               1.37V
   2.60nS         1.38V               1.38V               1.38V
   2.80nS         1.38V               1.38V               1.38V
   3.00nS         1.38V               1.38V               1.38V
   3.20nS         1.38V               1.38V               1.38V
   3.40nS         1.38V               1.38V               1.38V
   3.60nS         1.38V               1.38V               1.38V
   3.80nS         1.38V               1.38V               1.38V
   4.00nS         1.38V               1.38V               1.38V
   4.20nS         1.38V               1.38V               1.38V
   4.40nS         1.38V               1.38V               1.38V
   4.60nS         1.38V               1.38V               1.38V
   4.80nS         1.38V               1.38V               1.38V
   5.00nS         1.38V               1.38V               1.38V
   5.20nS         1.38V               1.38V               1.38V
   5.40nS         1.38V               1.38V               1.38V
   5.60nS         1.38V               1.38V               1.38V
   5.80nS         1.38V               1.38V               1.38V
   6.00nS         1.38V               1.38V               1.38V
   6.20nS         1.38V               1.38V               1.38V
   6.40nS         1.38V               1.38V               1.38V
   6.60nS         1.38V               1.38V               1.38V
   6.80nS         1.38V               1.38V               1.38V
   7.00nS         1.38V               1.38V               1.38V
   7.20nS         1.38V               1.38V               1.38V
   7.40nS         1.38V               1.38V               1.38V
   7.60nS         1.38V               1.38V               1.38V
   7.80nS         1.38V               1.38V               1.38V
   8.00nS         1.38V               1.38V               1.38V
   8.20nS         1.38V               1.38V               1.38V
   8.40nS         1.38V               1.38V               1.38V
   8.60nS         1.38V               1.38V               1.38V
   8.80nS         1.38V               1.38V               1.38V
   9.00nS         1.38V               1.38V               1.38V
   9.20nS         1.38V               1.38V               1.38V
   9.40nS         1.38V               1.38V               1.38V
   9.60nS         1.38V               1.38V               1.38V
   9.80nS         1.38V               1.38V               1.38V
  10.00nS         1.38V               1.38V               1.38V
|
[Rising Waveform]
R_fixture = 25.00
V_fixture = 3.60
V_fixture_min = 3.60
V_fixture_max = 3.60
| time           V(typ)              V(min)              V(max)
|
  0.000S          1.75V               1.75V               1.75V
   0.20nS         1.75V               1.75V               1.75V
   0.40nS         1.75V               1.75V               1.75V
   0.60nS         1.75V               1.75V               1.75V
   0.80nS         1.75V               1.75V               1.75V
   1.00nS         1.82V               1.82V               1.82V
   1.20nS         2.22V               2.22V               2.22V
   1.40nS         3.32V               3.32V               3.32V
   1.60nS         3.55V               3.55V               3.55V
   1.80nS         3.58V               3.58V               3.58V
   2.00nS         3.58V               3.58V               3.58V
   2.20nS         3.60V               3.60V               3.60V
   2.40nS         3.60V               3.60V               3.60V
   2.60nS         3.60V               3.60V               3.60V
   2.80nS         3.60V               3.60V               3.60V
   3.00nS         3.60V               3.60V               3.60V
   3.20nS         3.60V               3.60V               3.60V
   3.40nS         3.60V               3.60V               3.60V
   3.60nS         3.60V               3.60V               3.60V
   3.80nS         3.60V               3.60V               3.60V
   4.00nS         3.60V               3.60V               3.60V
   4.20nS         3.60V               3.60V               3.60V
   4.40nS         3.60V               3.60V               3.60V
   4.60nS         3.60V               3.60V               3.60V
   4.80nS         3.60V               3.60V               3.60V
   5.00nS         3.60V               3.60V               3.60V
   5.20nS         3.60V               3.60V               3.60V
   5.40nS         3.60V               3.60V               3.60V
   5.60nS         3.60V               3.60V               3.60V
   5.80nS         3.60V               3.60V               3.60V
   6.00nS         3.60V               3.60V               3.60V
   6.20nS         3.60V               3.60V               3.60V
   6.40nS         3.60V               3.60V               3.60V
   6.60nS         3.60V               3.60V               3.60V
   6.80nS         3.60V               3.60V               3.60V
   7.00nS         3.60V               3.60V               3.60V
   7.20nS         3.60V               3.60V               3.60V
   7.40nS         3.60V               3.60V               3.60V
   7.60nS         3.60V               3.60V               3.60V
   7.80nS         3.60V               3.60V               3.60V
   8.00nS         3.60V               3.60V               3.60V
   8.20nS         3.60V               3.60V               3.60V
   8.40nS         3.60V               3.60V               3.60V
   8.60nS         3.60V               3.60V               3.60V
   8.80nS         3.60V               3.60V               3.60V
   9.00nS         3.60V               3.60V               3.60V
   9.20nS         3.60V               3.60V               3.60V
   9.40nS         3.60V               3.60V               3.60V
   9.60nS         3.60V               3.60V               3.60V
   9.80nS         3.60V               3.60V               3.60V
  10.00nS         3.60V               3.60V               3.60V
|
[Falling Waveform]
R_fixture = 25.00
V_fixture = 3.60
V_fixture_min = 3.60
V_fixture_max = 3.60
| time           V(typ)              V(min)              V(max)
|
  0.000S          3.60V               3.60V               3.60V
   0.20nS         3.60V               3.60V               3.60V
   0.40nS         3.60V               3.60V               3.60V
   0.60nS         3.60V               3.60V               3.60V
   0.80nS         3.60V               3.60V               3.60V
   1.00nS         3.60V               3.60V               3.60V
   1.20nS         3.60V               3.60V               3.60V
   1.40nS         3.59V               3.59V               3.59V
   1.60nS         3.33V               3.33V               3.33V
   1.80nS         3.05V               3.05V               3.05V
   2.00nS         2.84V               2.84V               2.84V
   2.20nS         2.80V               2.80V               2.80V
   2.40nS         2.34V               2.34V               2.34V
   2.60nS         1.98V               1.98V               1.98V
   2.80nS         1.85V               1.85V               1.85V
   3.00nS         1.79V               1.79V               1.79V
   3.20nS         1.77V               1.77V               1.77V
   3.40nS         1.76V               1.76V               1.76V
   3.60nS         1.75V               1.75V               1.75V
   3.80nS         1.75V               1.75V               1.75V
   4.00nS         1.75V               1.75V               1.75V
   4.20nS         1.75V               1.75V               1.75V
   4.40nS         1.75V               1.75V               1.75V
   4.60nS         1.75V               1.75V               1.75V
   4.80nS         1.75V               1.75V               1.75V
   5.00nS         1.75V               1.75V               1.75V
   5.20nS         1.75V               1.75V               1.75V
   5.40nS         1.75V               1.75V               1.75V
   5.60nS         1.75V               1.75V               1.75V
   5.80nS         1.75V               1.75V               1.75V
   6.00nS         1.75V               1.75V               1.75V
   6.20nS         1.75V               1.75V               1.75V
   6.40nS         1.75V               1.75V               1.75V
   6.60nS         1.75V               1.75V               1.75V
   6.80nS         1.75V               1.75V               1.75V
   7.00nS         1.75V               1.75V               1.75V
   7.20nS         1.75V               1.75V               1.75V
   7.40nS         1.75V               1.75V               1.75V
   7.60nS         1.75V               1.75V               1.75V
   7.80nS         1.75V               1.75V               1.75V
   8.00nS         1.75V               1.75V               1.75V
   8.20nS         1.75V               1.75V               1.75V
   8.40nS         1.75V               1.75V               1.75V
   8.60nS         1.75V               1.75V               1.75V
   8.80nS         1.75V               1.75V               1.75V
   9.00nS         1.75V               1.75V               1.75V
   9.20nS         1.75V               1.75V               1.75V
   9.40nS         1.75V               1.75V               1.75V
   9.60nS         1.75V               1.75V               1.75V
   9.80nS         1.75V               1.75V               1.75V
  10.00nS         1.75V               1.75V               1.75V
|
[Falling Waveform]
R_fixture = 25.00
V_fixture = 0.000
V_fixture_min = 0.000
V_fixture_max = 0.000
| time           V(typ)              V(min)              V(max)
|
  0.000S          1.38V               1.38V               1.38V
   0.20nS         1.38V               1.38V               1.38V
   0.40nS         1.38V               1.38V               1.38V
   0.60nS         1.38V               1.38V               1.38V
   0.80nS         1.38V               1.38V               1.38V
   1.00nS         1.38V               1.38V               1.38V
   1.20nS         1.38V               1.38V               1.38V
   1.40nS         1.37V               1.37V               1.37V
   1.60nS         1.00V               1.00V               1.00V
   1.80nS         0.36V               0.36V               0.36V
   2.00nS        47.51mV             47.51mV             47.51mV
   2.20nS        17.40mV             17.40mV             17.40mV
   2.40nS        14.42mV             14.42mV             14.42mV
   2.60nS         2.09mV              2.09mV              2.09mV
   2.80nS         1.04mV              1.04mV              1.04mV
   3.00nS         0.57mV              0.57mV              0.57mV
   3.20nS         0.41mV              0.41mV              0.41mV
   3.40nS         0.28mV              0.28mV              0.28mV
   3.60nS         0.22mV              0.22mV              0.22mV
   3.80nS         0.19mV              0.19mV              0.19mV
   4.00nS         0.17mV              0.17mV              0.17mV
   4.20nS         0.15mV              0.15mV              0.15mV
   4.40nS         0.13mV              0.13mV              0.13mV
   4.60nS         0.12mV              0.12mV              0.12mV
   4.80nS         0.11mV              0.11mV              0.11mV
   5.00nS         0.10mV              0.10mV              0.10mV
   5.20nS        96.04uV             96.04uV             96.04uV
   5.40nS        87.15uV             87.15uV             87.15uV
   5.60nS        79.44uV             79.44uV             79.44uV
   5.80nS        75.28uV             75.28uV             75.28uV
   6.00nS        71.50uV             71.50uV             71.50uV
   6.20nS        66.97uV             66.97uV             66.97uV
   6.40nS        62.92uV             62.92uV             62.92uV
   6.60nS        59.19uV             59.19uV             59.19uV
   6.80nS        55.79uV             55.79uV             55.79uV
   7.00nS        52.75uV             52.75uV             52.75uV
   7.20nS        49.96uV             49.96uV             49.96uV
   7.40nS        46.77uV             46.77uV             46.77uV
   7.60nS        43.94uV             43.94uV             43.94uV
   7.80nS        42.43uV             42.43uV             42.43uV
   8.00nS        40.97uV             40.97uV             40.97uV
   8.20nS        39.12uV             39.12uV             39.12uV
   8.40nS        37.40uV             37.40uV             37.40uV
   8.60nS        35.80uV             35.80uV             35.80uV
   8.80nS        34.34uV             34.34uV             34.34uV
   9.00nS        33.00uV             33.00uV             33.00uV
   9.20nS        31.74uV             31.74uV             31.74uV
   9.40nS        30.80uV             30.80uV             30.80uV
   9.60nS        30.41uV             30.41uV             30.41uV
   9.80nS        30.76uV             30.76uV             30.76uV
  10.00nS        31.36uV             31.36uV             31.36uV
|
| End [Model] tristate_driver
|
| End [Component] OUTPUT DRIVER
|
[End]

Regards
Anshuli

- --------------0121A56684CCD5256AA2C438
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Attached is the control file that I am using for this. I have defined only
one corner .
<br>| data0 -&nbsp; TFP501 DATA BUFFER : tristatable output buffer, with
ST=0.
<br>|
<p>|
<br>| Specify the IBIS version and file revision number.
<br>|
<br>[IBIS Ver]&nbsp; 2.1
<br>[File rev]&nbsp;&nbsp; 0
<br>[File name]&nbsp;&nbsp;&nbsp;&nbsp; ubt062.ibs
<br>&nbsp;
<p>|[Clean up]
<br>[Clamp tolerance] 0
<br>|
<br>| Add some comments to identify the file.
<br>|
<br>[date]&nbsp; Jan 29, 2002
<br>[source] From TFP501 DATA BUFFER spice models
<p>[Disclaimer] Please be aware that in the absence of a written agreement
<br>+Texas Instruments(TI) assumes no liability for:
<br>+(1) The accuracy of the IBIS models provided to your company
<br>+(2) The proper functioning of these Models in your design
<br>+&nbsp;&nbsp;&nbsp; or for any resulting applications;or
<br>+(3)Infringement of patents,copyrights or intellectual
<br>+&nbsp;&nbsp; property rights resulting from your use of these models.
<br>+ TI provides IBIS Models as a service to our customers and
<br>+ therefore reserves the right to limit distribution of the
<br>+ Models.
<p>[Copyright] Property of Texas Instruments Incorporated.
<br>+Unauthorised reproduction and/or distribution is strictly prohibited.
<br>+This product is protected under copyright law and trade
<br>+secret law as an unpublished work.
<br>+Created 2000,(C) Copyright 2000,Texas Instruments Inc.,
<br>+All Rights Reserved.These commodities are under the U.S.
<br>+Government distribution license control.As such,they are not
<br>+to be re-exported without the prior approval of the U.S.
<br>+Department of Commerce.
<p>|
<br>| Give the spice type.&nbsp; Allowable values are hspice, pspice, spice2,
<br>| spice3 and spectre.
<br>|
<br>[Spice type]&nbsp; spice2
<br>[Spice command] "spice3&nbsp; -tmp /tmp -init /dev/null %s %s /dev/null
>%s 2>&amp;1"
<p>|
<br>| Now specify some global parameters. These parameters will apply to
<br>| _all_ the models in this file.
<br>|
<br>| Note on the [Temperature range] keyword: Since this is a CMOS circuit,
<br>| the min column contains the highest temperature, since this temperature
<br>| causes or amplifies the "min" (slow, weak) behavior, while the max
<br>| column contains the lowest temperature, since this temperature causes
or
<br>| amplifies the "max" (fast, strong) behavior.&nbsp; If this were a
bipolar
<br>| circuit, these temperature values would be reversed.
<br>|
<br>[temperature range] 0 0 0
<br>[voltage range] 3.6 3.6 3.6
<br>[sim time] 10ns
<br>[vil] 0 0 0
<br>[vih] 1.65 1.65 1.65
<br>[rload] 50
<br>[Tr]&nbsp; 1n 1n 1n
<br>[Tf]&nbsp; 1n 1n 1n
<p>|
<br>| Specify the default pin parasitics
<br>|
<br>|[R_pkg]&nbsp;&nbsp; 0.1&nbsp; 0.097 0.123
<br>|[L_pkg]&nbsp;&nbsp; 1.5nH 2.0nH&nbsp; 2.5nH
<br>|[C_pkg]&nbsp;&nbsp; 1.5pF&nbsp;&nbsp; 1.0pF&nbsp;&nbsp; 2.0pF
<br>[C_comp]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.046pf 0.046pf 0.046pf
<p>|
<br>| Component Description
<br>|
<br>[Component] OUTPUT DRIVER
<br>[manufacturer] Texas Instruments
<p>|
<br>| Specify the SPICE file where the circuit is located.
<br>|
<br>| ST made high in the SPICE netlist
<br>|
<br>|
<br>[Spice file] UBT062.spi
<p>|
<br>| Now specify the pin list.&nbsp; Since we're just creating an IBIS
file for
<br>| the driver, we'll use a very short pin list.
<br>|
<br>| The pin list formats can be found in doc/s2ibis2.txt.&nbsp; Briefly,
the
<br>| first line of each pin is of the form
<br>|
<br>|&nbsp; pin_name&nbsp; spice_node&nbsp; signal_name&nbsp; model_name
<br>|
<br>| If a pin description has more than one line (e.g. the first pin in
the
<br>| pin list below), the second line is of the form
<br>|
<br>| -> input_pin&nbsp; enable_pin
<br>|
<br>| Note that the second line must begin with the symbol "->".
<br>[Pin]
<br>Y Y3 Y tristate_driver
<br>-> A GZ
<br>A A A dummy
<br>GZ GZ GZ dummy
<br>VDDS VDDS VDDS POWER
<br>VSSS VSSS VSSS GND
<p>|
<br>| Now we give the particulars of the model "tristate_driver".&nbsp;
It is of
<br>| type "3-State" (allowable types may be found in doc/s2ibis2.txt)
and is
<br>| non-inverting. We want to use models from the file "spectre.mod"
for
<br>| typ, min and max simulations, and we want to include both a rising
and
<br>| falling waveform in our IBIS model. Both the rising and falling
<br>| wveforms have a 500 ohm load; the rising waveform has the load
<br>| grounded, while the falling waveform has the load connected to 3.3V.
<br>| Neither waveform includes any other test fixture or package parasitics.
<br>|
<br>[Model] tristate_driver
<br>[Model type] 3-state
<br>[Polarity] Non-inverting
<br>[Enable] active-low
<br>[Model file] strong strong strong
<br>[Rising waveform]&nbsp; 50 0 0 0&nbsp; NA NA NA NA NA
<br>[Rising waveform]&nbsp; 50 3.6 3.6 3.6&nbsp; NA NA NA NA NA
<br>[Falling waveform] 50 3.6 3.6 3.6 NA NA NA NA NA
<br>[Falling waveform] 50 0 0 0&nbsp; NA NA NA NA NA
<br>|[Vmeas] 1.5
<p>|
<br>| Now specify stuff for the model "input".
<br>[Model]&nbsp; dummy
<br>[nomodel]
<br>
<hr WIDTH="100%">
<p>IBIS&nbsp;model
<p>|************************************************************************
<br>| IBIS file ubt062.ibs created by s2ibis2 version 1.1
<br>| North Carolina State University Electronics Research Laboratory&nbsp;
1995
<br>|************************************************************************
<br>|
<br>[IBIS ver]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.1
<br>[File name]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ubt062.ibs
<br>[File Rev]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0
<br>[Date]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Jan 29, 2002
<br>[Source]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; From TFP501
DATA BUFFER spice models
<br>[Disclaimer]&nbsp;&nbsp;&nbsp;&nbsp; Please be aware that in the absence
of a written agreement
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Texas Instruments(TI) assumes no liability for: (1) The
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
accuracy of the IBIS models provided to your company (2) The
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
proper functioning of these Models in your design or for any
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
resulting applications;or (3)Infringement of
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
patents,copyrights or intellectual property rights resulting
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
from your use of these models. TI provides IBIS Models as a
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
service to our customers and therefore reserves the right to
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
limit distribution of the Models.
<br>[Copyright]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Property of Texas Instruments
Incorporated. Unauthorised
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
reproduction and/or distribution is strictly prohibited. This
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
product is protected under copyright law and trade secret law
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
as an unpublished work. Created 2000,(C) Copyright 2000,Texas
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Instruments Inc., All Rights Reserved.These commodities are
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
under the U.S. Government distribution license control.As
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
such,they are not to be re-exported without the prior approval
<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
of the U.S. Department of Commerce.
<br>|
<br>|************************************************************************
<br>|&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Component OUTPUT DRIVER
<br>|************************************************************************
<br>|
<br>[Component]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; OUTPUT DRIVER
<br>[Manufacturer]&nbsp;&nbsp; Texas Instruments
<br>[Package]
<br>| variable&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; typ&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
min&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
max
<br>R_pkg&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000
<br>L_pkg&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000H&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000H&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000H
<br>C_pkg&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000F&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000F&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000F
<br>|
<br>[Pin]&nbsp; signal_name&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
model_name&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
R_pin&nbsp;&nbsp;&nbsp;&nbsp; L_pin&nbsp;&nbsp;&nbsp;&nbsp; C_pin
<br>Y&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Y&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
tristate_driver
<br>| A&nbsp;&nbsp;&nbsp; A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
dummy
<br>| GZ&nbsp;&nbsp; GZ&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
dummy
<br>VDDS&nbsp;&nbsp; VDDS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
POWER
<br>VSSS&nbsp;&nbsp; VSSS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
GND
<br>|
<br>|************************************************************************
<br>|&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Model tristate_driver
<br>|************************************************************************
<br>|
<br>[Model]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; tristate_driver
<br>Model_type&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3-state
<br>Polarity&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Non-Inverting
<br>Enable&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Active-Low
<br>C_comp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
46.00fF&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
46.00fF&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
46.00fF
<br>|
<br>|
<br>[Temperature Range]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.000&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000
<br>[Voltage Range]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>[Pulldown]
<br>| voltage&nbsp;&nbsp;&nbsp;&nbsp; I(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(max)
<br>|
<br>&nbsp; -3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.50mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.50mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.50mA
<br>&nbsp; -3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.57mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.57mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.57mA
<br>&nbsp; -3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.66mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.66mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.66mA
<br>&nbsp; -2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.79mA
<br>&nbsp; -2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.97mA
<br>&nbsp; -2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.26mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.26mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.26mA
<br>&nbsp; -1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.79mA
<br>&nbsp; -1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -3.02mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -3.02mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -3.02mA
<br>&nbsp; -1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -8.26mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -8.26mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -8.26mA
<br>&nbsp; -0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -42.48mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -42.48mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -42.48mA
<br>&nbsp; -0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -42.48mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -42.48mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -42.48mA
<br>&nbsp; -0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -42.27mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -42.27mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -42.27mA
<br>&nbsp; -0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -39.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -39.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -39.43mA
<br>&nbsp; -0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -35.54mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -35.54mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -35.54mA
<br>&nbsp; -0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -30.28mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -30.28mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -30.28mA
<br>&nbsp; -0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -24.44mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -24.44mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -24.44mA
<br>&nbsp; -0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -18.46mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -18.46mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -18.46mA
<br>&nbsp; -0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -12.39mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -12.39mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -12.39mA
<br>&nbsp; -0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -6.24mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -6.24mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -6.24mA
<br>&nbsp;&nbsp; 0.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.35nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.35nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.35nA
<br>&nbsp;&nbsp; 0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 6.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
6.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
6.17mA
<br>&nbsp;&nbsp; 0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 12.11mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
12.11mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
12.11mA
<br>&nbsp;&nbsp; 0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.83mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.83mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.83mA
<br>&nbsp;&nbsp; 0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 23.32mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
23.32mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
23.32mA
<br>&nbsp;&nbsp; 0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 28.58mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
28.58mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
28.58mA
<br>&nbsp;&nbsp; 0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 33.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
33.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
33.62mA
<br>&nbsp;&nbsp; 0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 38.42mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
38.42mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
38.42mA
<br>&nbsp;&nbsp; 0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42.98mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
42.98mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
42.98mA
<br>&nbsp;&nbsp; 0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 47.31mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
47.31mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
47.31mA
<br>&nbsp;&nbsp; 1.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 51.40mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
51.40mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
51.40mA
<br>&nbsp;&nbsp; 1.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 55.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
55.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
55.25mA
<br>&nbsp;&nbsp; 1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 58.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
58.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
58.85mA
<br>&nbsp;&nbsp; 1.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 62.21mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
62.21mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
62.21mA
<br>&nbsp;&nbsp; 1.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 65.32mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
65.32mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
65.32mA
<br>&nbsp;&nbsp; 1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 68.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
68.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
68.17mA
<br>&nbsp;&nbsp; 1.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 70.77mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
70.77mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
70.77mA
<br>&nbsp;&nbsp; 1.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 73.10mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
73.10mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
73.10mA
<br>&nbsp;&nbsp; 1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 75.14mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
75.14mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
75.14mA
<br>&nbsp;&nbsp; 1.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 76.86mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
76.86mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
76.86mA
<br>&nbsp;&nbsp; 2.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 78.18mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
78.18mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
78.18mA
<br>&nbsp;&nbsp; 2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 79.13mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
79.13mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
79.13mA
<br>&nbsp;&nbsp; 2.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 79.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
79.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
79.79mA
<br>&nbsp;&nbsp; 2.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 80.27mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
80.27mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
80.27mA
<br>&nbsp;&nbsp; 2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 80.63mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
80.63mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
80.63mA
<br>&nbsp;&nbsp; 2.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 80.92mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
80.92mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
80.92mA
<br>&nbsp;&nbsp; 2.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 81.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.17mA
<br>&nbsp;&nbsp; 2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 81.38mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.38mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.38mA
<br>&nbsp;&nbsp; 2.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 81.56mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.56mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.56mA
<br>&nbsp;&nbsp; 2.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 81.73mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.73mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.73mA
<br>&nbsp;&nbsp; 3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 81.88mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.88mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
81.88mA
<br>&nbsp;&nbsp; 3.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.03mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.03mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.03mA
<br>&nbsp;&nbsp; 3.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.16mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.16mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.16mA
<br>&nbsp;&nbsp; 3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.29mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.29mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.29mA
<br>&nbsp;&nbsp; 3.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.41mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.41mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.41mA
<br>&nbsp;&nbsp; 3.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.52mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.52mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.52mA
<br>&nbsp;&nbsp; 3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.64mA
<br>&nbsp;&nbsp; 3.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.75mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.75mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.75mA
<br>&nbsp;&nbsp; 3.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.86mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.86mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.86mA
<br>&nbsp;&nbsp; 3.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 82.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
82.97mA
<br>&nbsp;&nbsp; 4.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 83.08mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.08mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.08mA
<br>&nbsp;&nbsp; 4.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 83.19mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.19mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.19mA
<br>&nbsp;&nbsp; 4.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 83.50mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.50mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.50mA
<br>&nbsp;&nbsp; 4.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 84.03mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.03mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.03mA
<br>&nbsp;&nbsp; 4.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 83.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.64mA
<br>&nbsp;&nbsp; 4.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 83.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
83.85mA
<br>&nbsp;&nbsp; 4.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 84.09mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.09mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.09mA
<br>&nbsp;&nbsp; 4.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 84.35mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.35mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.35mA
<br>&nbsp;&nbsp; 5.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 85.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
85.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
85.25mA
<br>&nbsp;&nbsp; 5.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 86.39mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
86.39mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
86.39mA
<br>&nbsp;&nbsp; 5.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 87.87mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
87.87mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
87.87mA
<br>&nbsp;&nbsp; 5.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 89.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
89.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
89.74mA
<br>&nbsp;&nbsp; 6.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 92.09mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
92.09mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
92.09mA
<br>&nbsp;&nbsp; 6.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 94.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
94.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
94.97mA
<br>&nbsp;&nbsp; 6.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 98.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
98.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
98.43mA
<br>&nbsp;&nbsp; 7.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.10A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10A
<br>&nbsp; -1.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -3.50A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.96A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.96A
<br>&nbsp;&nbsp; 7.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.10A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10A
<br>|
<br>[Pullup]
<br>| voltage&nbsp;&nbsp;&nbsp;&nbsp; I(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(max)
<br>|
<br>&nbsp; -3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.12A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12A
<br>&nbsp; -3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.11A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11A
<br>&nbsp; -3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 95.23mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
95.23mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
95.23mA
<br>&nbsp; -2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 84.49mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.49mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
84.49mA
<br>&nbsp; -2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 73.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
73.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
73.79mA
<br>&nbsp; -2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 63.18mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
63.18mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
63.18mA
<br>&nbsp; -1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 52.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
52.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
52.74mA
<br>&nbsp; -1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 43.30mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
43.30mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
43.30mA
<br>&nbsp; -1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 34.49mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
34.49mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
34.49mA
<br>&nbsp; -0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 25.71mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
25.71mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
25.71mA
<br>&nbsp; -0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 25.71mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
25.71mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
25.71mA
<br>&nbsp; -0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 22.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
22.79mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
22.79mA
<br>&nbsp; -0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 19.89mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
19.89mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
19.89mA
<br>&nbsp; -0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.02mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.02mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.02mA
<br>&nbsp; -0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 14.14mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
14.14mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
14.14mA
<br>&nbsp; -0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 11.38mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
11.38mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
11.38mA
<br>&nbsp; -0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 8.61mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
8.61mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
8.61mA
<br>&nbsp; -0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 5.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
5.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
5.74mA
<br>&nbsp; -0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.87mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.87mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.87mA
<br>&nbsp;&nbsp; 0.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.12nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12nA
<br>&nbsp;&nbsp; 0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -2.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.85mA
<br>&nbsp;&nbsp; 0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -5.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -5.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -5.68mA
<br>&nbsp;&nbsp; 0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -8.47mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -8.47mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -8.47mA
<br>&nbsp;&nbsp; 0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -11.24mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -11.24mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -11.24mA
<br>&nbsp;&nbsp; 0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -13.98mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -13.98mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -13.98mA
<br>&nbsp;&nbsp; 0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -16.69mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -16.69mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -16.69mA
<br>&nbsp;&nbsp; 0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -19.37mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -19.37mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -19.37mA
<br>&nbsp;&nbsp; 0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -22.01mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -22.01mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -22.01mA
<br>&nbsp;&nbsp; 0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -24.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -24.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -24.62mA
<br>&nbsp;&nbsp; 1.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -27.20mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -27.20mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -27.20mA
<br>&nbsp;&nbsp; 1.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -29.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -29.74mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -29.74mA
<br>&nbsp;&nbsp; 1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -32.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -32.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -32.25mA
<br>&nbsp;&nbsp; 1.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -34.72mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -34.72mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -34.72mA
<br>&nbsp;&nbsp; 1.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -37.15mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -37.15mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -37.15mA
<br>&nbsp;&nbsp; 1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -39.54mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -39.54mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -39.54mA
<br>&nbsp;&nbsp; 1.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -41.90mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -41.90mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -41.90mA
<br>&nbsp;&nbsp; 1.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -44.21mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -44.21mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -44.21mA
<br>&nbsp;&nbsp; 1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -46.47mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -46.47mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -46.47mA
<br>&nbsp;&nbsp; 1.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -48.69mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -48.69mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -48.69mA
<br>&nbsp;&nbsp; 2.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -50.87mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -50.87mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -50.87mA
<br>&nbsp;&nbsp; 2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -53.00mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -53.00mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -53.00mA
<br>&nbsp;&nbsp; 2.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -55.07mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -55.07mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -55.07mA
<br>&nbsp;&nbsp; 2.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -57.10mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -57.10mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -57.10mA
<br>&nbsp;&nbsp; 2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -59.07mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -59.07mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -59.07mA
<br>&nbsp;&nbsp; 2.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -60.99mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -60.99mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -60.99mA
<br>&nbsp;&nbsp; 2.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -62.84mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -62.84mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -62.84mA
<br>&nbsp;&nbsp; 2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -64.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -64.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -64.64mA
<br>&nbsp;&nbsp; 2.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -66.37mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -66.37mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -66.37mA
<br>&nbsp;&nbsp; 2.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -68.04mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -68.04mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -68.04mA
<br>&nbsp;&nbsp; 3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -69.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -69.64mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -69.64mA
<br>&nbsp;&nbsp; 3.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -71.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -71.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -71.17mA
<br>&nbsp;&nbsp; 3.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -72.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -72.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -72.62mA
<br>&nbsp;&nbsp; 3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -74.01mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -74.01mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -74.01mA
<br>&nbsp;&nbsp; 3.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -75.31mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -75.31mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -75.31mA
<br>&nbsp;&nbsp; 3.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -76.55mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -76.55mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -76.55mA
<br>&nbsp;&nbsp; 3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -77.72mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -77.72mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -77.72mA
<br>&nbsp;&nbsp; 3.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -78.81mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -78.81mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -78.81mA
<br>&nbsp;&nbsp; 3.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -79.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -79.85mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -79.85mA
<br>&nbsp;&nbsp; 3.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -80.83mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -80.83mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -80.83mA
<br>&nbsp;&nbsp; 4.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -81.75mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -81.75mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -81.75mA
<br>&nbsp;&nbsp; 4.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -82.61mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -82.61mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -82.61mA
<br>&nbsp;&nbsp; 4.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -83.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -83.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -83.43mA
<br>&nbsp;&nbsp; 4.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -84.23mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -84.23mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -84.23mA
<br>&nbsp;&nbsp; 4.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -85.34mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -85.34mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -85.34mA
<br>&nbsp;&nbsp; 4.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -87.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -87.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -87.68mA
<br>&nbsp;&nbsp; 4.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -91.48mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -91.48mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -91.48mA
<br>&nbsp;&nbsp; 4.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -97.30mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -97.30mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -97.30mA
<br>&nbsp;&nbsp; 5.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.17A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.17A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.17A
<br>&nbsp;&nbsp; 5.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.28A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.28A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.28A
<br>&nbsp;&nbsp; 5.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.39A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.39A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.39A
<br>&nbsp;&nbsp; 5.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.50A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.50A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.50A
<br>&nbsp;&nbsp; 6.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.62A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.62A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.62A
<br>&nbsp;&nbsp; 6.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.73A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.73A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.73A
<br>&nbsp;&nbsp; 6.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.84A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.84A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.84A
<br>&nbsp;&nbsp; 7.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.96A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.96A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.96A
<br>&nbsp;&nbsp; 0.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.000A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.000A
<br>&nbsp;&nbsp; 7.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.00A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.00A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.00A
<br>|
<br>[GND_clamp]
<br>| voltage&nbsp;&nbsp;&nbsp;&nbsp; I(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(max)
<br>|
<br>&nbsp; -3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.00A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.00A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.00A
<br>&nbsp; -3.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.96A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.96A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.96A
<br>&nbsp; -3.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.92A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.92A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.92A
<br>&nbsp; -3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.88A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.88A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.88A
<br>&nbsp; -3.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.84A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.84A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.84A
<br>&nbsp; -3.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.80A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.80A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.80A
<br>&nbsp; -3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.77A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.77A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.77A
<br>&nbsp; -2.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.73A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.73A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.73A
<br>&nbsp; -2.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.69A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.69A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.69A
<br>&nbsp; -2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.65A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.65A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.65A
<br>&nbsp; -2.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.61A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.61A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.61A
<br>&nbsp; -2.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.58A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.58A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.58A
<br>&nbsp; -2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.54A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.54A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.54A
<br>&nbsp; -2.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.50A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.50A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.50A
<br>&nbsp; -2.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.46A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.46A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.46A
<br>&nbsp; -2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.43A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.43A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.43A
<br>&nbsp; -2.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.39A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.39A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.39A
<br>&nbsp; -1.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.35A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.35A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.35A
<br>&nbsp; -1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.31A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.31A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.31A
<br>&nbsp; -1.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.28A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.28A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.28A
<br>&nbsp; -1.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.24A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.24A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.24A
<br>&nbsp; -1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.20A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.20A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.20A
<br>&nbsp; -1.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.17A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.17A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.17A
<br>&nbsp; -1.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.13A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.13A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.13A
<br>&nbsp; -1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -95.41mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -95.41mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -95.41mA
<br>&nbsp; -1.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -62.02mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -62.02mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -62.02mA
<br>&nbsp; -1.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -32.45mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -32.45mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -32.45mA
<br>&nbsp; -0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -13.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -13.17mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -13.17mA
<br>&nbsp; -0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -6.39mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -6.39mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -6.39mA
<br>&nbsp; -0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -2.78mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.78mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.78mA
<br>&nbsp; -0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.68mA
<br>&nbsp; -0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -69.97uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -69.97uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -69.97uA
<br>&nbsp; -0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -3.65uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -3.65uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -3.65uA
<br>&nbsp; -0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.11uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.11uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.11uA
<br>&nbsp; -0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -5.21nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -5.21nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -5.21nA
<br>&nbsp; -0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -2.44nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.44nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.44nA
<br>&nbsp;&nbsp; 0.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -2.13nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.13nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -2.13nA
<br>&nbsp;&nbsp; 0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.89nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.89nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.89nA
<br>&nbsp;&nbsp; 0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.68nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.68nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.68nA
<br>&nbsp;&nbsp; 0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.49nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.49nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.49nA
<br>&nbsp;&nbsp; 0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.32nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.32nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.32nA
<br>&nbsp;&nbsp; 0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.17nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.17nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.17nA
<br>&nbsp;&nbsp; 0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.02nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.02nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.02nA
<br>&nbsp;&nbsp; 0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.89nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.89nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.89nA
<br>&nbsp;&nbsp; 0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.78nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.78nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.78nA
<br>&nbsp;&nbsp; 0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.67nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.67nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.67nA
<br>&nbsp;&nbsp; 1.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.57nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.57nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.57nA
<br>&nbsp;&nbsp; 1.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.48nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.48nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.48nA
<br>&nbsp;&nbsp; 1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.40nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.40nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.40nA
<br>&nbsp;&nbsp; 1.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.33nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.33nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.33nA
<br>&nbsp;&nbsp; 1.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.26nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.26nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.26nA
<br>&nbsp;&nbsp; 1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.20nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.20nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.20nA
<br>&nbsp;&nbsp; 1.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -0.14nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.14nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -0.14nA
<br>&nbsp;&nbsp; 1.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -92.03pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -92.03pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -92.03pA
<br>&nbsp;&nbsp; 1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -44.85pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -44.85pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -44.85pA
<br>&nbsp;&nbsp; 1.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -1.42pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.42pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- -1.42pA
<br>&nbsp;&nbsp; 2.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 38.68pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
38.68pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
38.68pA
<br>&nbsp;&nbsp; 2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 75.84pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
75.84pA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
75.84pA
<br>&nbsp;&nbsp; 2.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.11nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11nA
<br>&nbsp;&nbsp; 2.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.14nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.14nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.14nA
<br>&nbsp;&nbsp; 2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.17nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.17nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.17nA
<br>&nbsp;&nbsp; 2.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.20nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.20nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.20nA
<br>&nbsp;&nbsp; 2.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.23nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.23nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.23nA
<br>&nbsp;&nbsp; 2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.25nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.25nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.25nA
<br>&nbsp;&nbsp; 2.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.28nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.28nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.28nA
<br>&nbsp;&nbsp; 2.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.30nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.30nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.30nA
<br>&nbsp;&nbsp; 3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.32nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.32nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.32nA
<br>&nbsp;&nbsp; 3.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.34nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.34nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.34nA
<br>&nbsp;&nbsp; 3.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.36nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.36nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.36nA
<br>&nbsp;&nbsp; 3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.37nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.37nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.37nA
<br>&nbsp;&nbsp; 3.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.38nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.38nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.38nA
<br>&nbsp;&nbsp; 3.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.40nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.40nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.40nA
<br>&nbsp;&nbsp; 3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.56nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.56nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.56nA
<br>|
<br>[POWER_clamp]
<br>| voltage&nbsp;&nbsp;&nbsp;&nbsp; I(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
I(max)
<br>|
<br>&nbsp; -3.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3.00mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.00mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.00mA
<br>&nbsp; -3.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.89mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.89mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.89mA
<br>&nbsp; -3.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.78mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.78mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.78mA
<br>&nbsp; -3.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.67mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.67mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.67mA
<br>&nbsp; -3.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.56mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.56mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.56mA
<br>&nbsp; -3.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.46mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.46mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.46mA
<br>&nbsp; -3.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.35mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.35mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.35mA
<br>&nbsp; -2.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.24mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.24mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.24mA
<br>&nbsp; -2.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.14mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.14mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.14mA
<br>&nbsp; -2.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.03mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.03mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.03mA
<br>&nbsp; -2.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.93mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.93mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.93mA
<br>&nbsp; -2.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.82mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.82mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.82mA
<br>&nbsp; -2.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.72mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.72mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.72mA
<br>&nbsp; -2.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.62mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.62mA
<br>&nbsp; -2.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.53mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.53mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.53mA
<br>&nbsp; -2.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.43mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.43mA
<br>&nbsp; -2.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.34mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.34mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.34mA
<br>&nbsp; -1.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.25mA
<br>&nbsp; -1.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.15mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.15mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.15mA
<br>&nbsp; -1.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.06mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.06mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.06mA
<br>&nbsp; -1.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.97mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.97mA
<br>&nbsp; -1.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.88mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.88mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.88mA
<br>&nbsp; -1.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.78mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.78mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.78mA
<br>&nbsp; -1.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.69mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.69mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.69mA
<br>&nbsp; -1.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.60mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.60mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.60mA
<br>&nbsp; -1.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.51mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.51mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.51mA
<br>&nbsp; -1.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.42mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.42mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.42mA
<br>&nbsp; -0.90&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.33mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.33mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.33mA
<br>&nbsp; -0.80&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.25mA
<br>&nbsp; -0.70&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.16mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.16mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.16mA
<br>&nbsp; -0.60&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 85.73uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
85.73uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
85.73uA
<br>&nbsp; -0.50&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.68mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.68mA
<br>&nbsp; -0.40&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.25mA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.25mA
<br>&nbsp; -0.30&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 8.01uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
8.01uA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
8.01uA
<br>&nbsp; -0.20&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 68.87nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
68.87nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
68.87nA
<br>&nbsp; -0.10&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3.39nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.39nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.39nA
<br>&nbsp;&nbsp; 0.00&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.56nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.56nA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.56nA
<br>|
<br>[Ramp]
<br>| variable&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; typ&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
min&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
max
<br>dV/dt_r&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.83/0.74n&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.83/0.74n&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.83/0.74n
<br>dV/dt_f&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.11/0.79n&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.11/0.79n&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.11/0.79n
<br>R_load = 25.00
<br>|
<br>[Rising Waveform]
<br>R_fixture = 25.00
<br>V_fixture = 0.000
<br>V_fixture_min = 0.000
<br>V_fixture_max = 0.000
<br>| time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(max)
<br>|
<br>&nbsp; 0.000S&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.33nV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.33nV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.33nV
<br>&nbsp;&nbsp; 0.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.84nV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.84nV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.84nV
<br>&nbsp;&nbsp; 0.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.67nV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.67nV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.67nV
<br>&nbsp;&nbsp; 0.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.29uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.29uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.29uV
<br>&nbsp;&nbsp; 0.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.99uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.99uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.99uV
<br>&nbsp;&nbsp; 1.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 53.27mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
53.27mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
53.27mV
<br>&nbsp;&nbsp; 1.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.23V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.23V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.23V
<br>&nbsp;&nbsp; 1.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.59V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.59V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.59V
<br>&nbsp;&nbsp; 1.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.75V
<br>&nbsp;&nbsp; 1.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.84V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.84V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.84V
<br>&nbsp;&nbsp; 2.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.09V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.09V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.09V
<br>&nbsp;&nbsp; 2.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.35V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.35V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.35V
<br>&nbsp;&nbsp; 2.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.37V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.37V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.37V
<br>&nbsp;&nbsp; 2.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 2.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 3.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 3.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 3.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 3.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 3.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 4.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 4.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 4.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 4.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 4.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 5.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 5.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 5.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 5.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 5.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 6.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 6.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 6.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 6.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 6.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 7.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 7.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 7.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 7.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 7.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 8.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 8.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 8.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 8.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 8.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 9.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 9.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 9.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 9.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 9.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp; 10.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>|
<br>[Rising Waveform]
<br>R_fixture = 25.00
<br>V_fixture = 3.60
<br>V_fixture_min = 3.60
<br>V_fixture_max = 3.60
<br>| time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(max)
<br>|
<br>&nbsp; 0.000S&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 0.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 0.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 0.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 0.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 1.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.82V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.82V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.82V
<br>&nbsp;&nbsp; 1.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.22V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.22V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.22V
<br>&nbsp;&nbsp; 1.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.32V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.32V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.32V
<br>&nbsp;&nbsp; 1.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.55V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.55V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.55V
<br>&nbsp;&nbsp; 1.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.58V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.58V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.58V
<br>&nbsp;&nbsp; 2.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.58V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.58V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.58V
<br>&nbsp;&nbsp; 2.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 2.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 2.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 2.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 3.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 3.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 3.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 3.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 3.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 4.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 4.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 4.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 4.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 4.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 5.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 5.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 5.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 5.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 5.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 6.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 6.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 6.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 6.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 6.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 7.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 7.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 7.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 7.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 7.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 8.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 8.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 8.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 8.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 8.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 9.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 9.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 9.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 9.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 9.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp; 10.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>|
<br>[Falling Waveform]
<br>R_fixture = 25.00
<br>V_fixture = 3.60
<br>V_fixture_min = 3.60
<br>V_fixture_max = 3.60
<br>| time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(max)
<br>|
<br>&nbsp; 0.000S&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 0.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 0.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 0.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 0.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 1.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 1.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.60V
<br>&nbsp;&nbsp; 1.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.59V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.59V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.59V
<br>&nbsp;&nbsp; 1.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.33V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.33V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.33V
<br>&nbsp;&nbsp; 1.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.05V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.05V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
3.05V
<br>&nbsp;&nbsp; 2.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.84V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.84V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.84V
<br>&nbsp;&nbsp; 2.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.80V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.80V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.80V
<br>&nbsp;&nbsp; 2.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.34V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.34V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.34V
<br>&nbsp;&nbsp; 2.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.98V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.98V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.98V
<br>&nbsp;&nbsp; 2.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.85V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.85V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.85V
<br>&nbsp;&nbsp; 3.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.79V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.79V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.79V
<br>&nbsp;&nbsp; 3.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.77V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.77V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.77V
<br>&nbsp;&nbsp; 3.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.76V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.76V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.76V
<br>&nbsp;&nbsp; 3.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 3.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 4.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 4.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 4.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 4.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 4.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 5.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 5.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 5.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 5.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 5.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 6.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 6.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 6.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 6.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 6.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 7.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 7.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 7.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 7.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 7.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 8.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 8.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 8.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 8.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 8.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 9.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 9.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 9.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 9.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp;&nbsp; 9.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>&nbsp; 10.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.75V
<br>|
<br>[Falling Waveform]
<br>R_fixture = 25.00
<br>V_fixture = 0.000
<br>V_fixture_min = 0.000
<br>V_fixture_max = 0.000
<br>| time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(typ)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(min)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
V(max)
<br>|
<br>&nbsp; 0.000S&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 0.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 0.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 0.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 0.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 1.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 1.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.38V
<br>&nbsp;&nbsp; 1.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.37V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.37V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.37V
<br>&nbsp;&nbsp; 1.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.00V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.00V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.00V
<br>&nbsp;&nbsp; 1.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.36V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.36V&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.36V
<br>&nbsp;&nbsp; 2.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 47.51mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
47.51mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
47.51mV
<br>&nbsp;&nbsp; 2.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 17.40mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.40mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
17.40mV
<br>&nbsp;&nbsp; 2.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 14.42mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
14.42mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
14.42mV
<br>&nbsp;&nbsp; 2.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.09mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.09mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
2.09mV
<br>&nbsp;&nbsp; 2.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.04mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.04mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
1.04mV
<br>&nbsp;&nbsp; 3.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.57mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.57mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.57mV
<br>&nbsp;&nbsp; 3.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.41mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.41mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.41mV
<br>&nbsp;&nbsp; 3.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.28mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.28mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.28mV
<br>&nbsp;&nbsp; 3.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.22mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.22mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.22mV
<br>&nbsp;&nbsp; 3.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.19mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.19mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.19mV
<br>&nbsp;&nbsp; 4.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.17mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.17mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.17mV
<br>&nbsp;&nbsp; 4.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.15mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.15mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.15mV
<br>&nbsp;&nbsp; 4.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.13mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.13mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.13mV
<br>&nbsp;&nbsp; 4.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.12mV
<br>&nbsp;&nbsp; 4.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.11mV
<br>&nbsp;&nbsp; 5.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10mV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
0.10mV
<br>&nbsp;&nbsp; 5.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 96.04uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
96.04uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
96.04uV
<br>&nbsp;&nbsp; 5.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 87.15uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
87.15uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
87.15uV
<br>&nbsp;&nbsp; 5.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 79.44uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
79.44uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
79.44uV
<br>&nbsp;&nbsp; 5.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 75.28uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
75.28uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
75.28uV
<br>&nbsp;&nbsp; 6.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 71.50uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
71.50uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
71.50uV
<br>&nbsp;&nbsp; 6.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 66.97uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
66.97uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
66.97uV
<br>&nbsp;&nbsp; 6.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 62.92uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
62.92uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
62.92uV
<br>&nbsp;&nbsp; 6.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 59.19uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
59.19uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
59.19uV
<br>&nbsp;&nbsp; 6.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 55.79uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
55.79uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
55.79uV
<br>&nbsp;&nbsp; 7.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 52.75uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
52.75uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
52.75uV
<br>&nbsp;&nbsp; 7.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 49.96uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
49.96uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
49.96uV
<br>&nbsp;&nbsp; 7.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 46.77uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
46.77uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
46.77uV
<br>&nbsp;&nbsp; 7.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 43.94uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
43.94uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
43.94uV
<br>&nbsp;&nbsp; 7.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 42.43uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
42.43uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
42.43uV
<br>&nbsp;&nbsp; 8.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 40.97uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
40.97uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
40.97uV
<br>&nbsp;&nbsp; 8.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 39.12uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
39.12uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
39.12uV
<br>&nbsp;&nbsp; 8.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 37.40uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
37.40uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
37.40uV
<br>&nbsp;&nbsp; 8.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 35.80uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
35.80uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
35.80uV
<br>&nbsp;&nbsp; 8.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 34.34uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
34.34uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
34.34uV
<br>&nbsp;&nbsp; 9.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 33.00uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
33.00uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
33.00uV
<br>&nbsp;&nbsp; 9.20nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 31.74uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
31.74uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
31.74uV
<br>&nbsp;&nbsp; 9.40nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 30.80uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
30.80uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
30.80uV
<br>&nbsp;&nbsp; 9.60nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 30.41uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
30.41uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
30.41uV
<br>&nbsp;&nbsp; 9.80nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 30.76uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
30.76uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
30.76uV
<br>&nbsp; 10.00nS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 31.36uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
31.36uV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
31.36uV
<br>|
<br>| End [Model] tristate_driver
<br>|
<br>| End [Component] OUTPUT DRIVER
<br>|
<br>[End]
<br>&nbsp;
<br>&nbsp;
<p>Regards
<br>Anshuli
<br>&nbsp;</html>

- --------------0121A56684CCD5256AA2C438--

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email [email-masked]
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to [email-masked].
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993

------------------------------

End of ibis-users V1 #17
************************