Subject: Re: IBIS Model

From: "Ross, Bob" <[email-masked]>
Date: Wed, 21 Nov 2001 16:22:28 -0800

Hello Sundip:

You need to contact Mentor Graphics directly on this
problem.  We generally do not discuss vendor-specific
issues on this reflector under EIA rules.

Or someone from the vendor can contact you directly,
off-line on this issue.

Bob Ross
Mentor Graphics

sundip-patel wrote:
> 
> Hi,
> 
> I have created an IBIS model for a testpad in the design called EPAD47. I have
> imported the model into ICX and can see it as a part when i open up 'DESIGN
> DATA', but when i go into the design and click on any test pad it is still
> using a technology model called default_in from default.tch.
> 
> Only when i go and insert the pin model for every testpad does it use the
> EPAD47 model (EPAD47_IN - pin model).
> 
> Could you tell me what i am doing wrong??
> 
> Sundip