2000 ANSI/EIA-656A IBIS Committee Participation Roster
As of 12/01/00 (updated periodically) Rev9.9 Previous participation under old95 - old99 directories Submit changes/updates to: webmaster
NOTE: This roster lists companies and organizations that have either participated in creating the IBIS spec or are creating/distributing/using IBIS models. Other than the specific statements of support under each organization's name, no support nor endorsement of the specification is implied. Companies designated by * are members of the EIA IBIS Open Forum.
Primary: Roy Leventhal
Phone: (847) 797-2152 Fax: (847) 222-2799
Address: 1800 W. Central Rd.
Mt. Prospect, IL 60056-2293
Secondary:Kalwant (Kal) Dosanjh
Phone: +44 1442 438399 Fax:
Address: Boundary Way
Marylands Park South
Bldg. 1
Hemel Hempstead
Hertfordshire HP2 7YU England
Support: 3Com is a participant in and supporter of IBIS activities. We use
IBIS models for Signal Integrity Analysis on high-speed networking
products.
Tag-line: With over 300 million customer connections world-wide, 3Com
Corporation connects more people and organizations to information
and each other in more innovative, simple and reliable ways. 3Com
delivers e-Networking solutions through information access products
and network systems to enterprises, small businesses, consumers,
carriers and network service providers. "3Com - More connected." For
further information, visit 3Com's World Wide Web site at
http://www.3com.com or the press site at http://www.3com.com/pressbox.
Category: IBIS user.
Primary: Karl Kachigan
Phone: (707) 577-3949, Fax: (707) 577-5260
Secondary:Henry Wu
Phone: (707) 577-5445, Fax: (707) 577-2995
Address: 1400 Fountaingrove Parkway
Santa Rosa, CA 94503
Support: Support IBIS models in HP 85240 Picosecond Interconnect
Modeling Suite for interconnect model development and
analysis.
Tag-line: HP EEsof is a leading supplier of high frequency analog
(RF/Microwave) design and modeling tools.
Category: EDA vendor
* Ansoft
Primary: Eric Bracken
Phone: (412) 261-3200, Ext. 135, Fax: (412) 471-9427
Secondary:Louis Smolenski
Phone: (412) 261-3200, Ext. 166, Fax: (412) 471-9427
Address: Fours Station Square
Suite 200
Pittsburgh, PA 15219-1119
Support:
Tag-line:
Category:
* Applied Simulation Technology, Inc
Primary: Raj Raghuram
Phone: (408) 436-9070 ext101, Fax: (408) 436-9078
Secondary:Fred Balistreri
Phone: (408) 436-9070 ext102, Fax: (408) 436-9078
Address: 1641 N. First Street Suite 170
San Jose, CA 95112
Support: Applied Simulation Technology tools support IBIS models.
Tag-line: Applied Simulation Technology offers accurate, state of the art
signal integrity, EMI / EMC and circuit simulation tools.
Category: EDA vendor
Primary: Atul P. Agarwal
Phone: +(91) (33) 353 0678
Secondary:Nirmal K. Agarwala
Phone: +(91) (33) 353 1959
Address: P84A CIT Road scheme IV (M) Calcutta 700 010, India
Support: Apt Software has developed the IBIS 3 Golden Parser and is also
responsible for its maintenance and support.
Tag-line: Apt Software provides turnkey software development services in
the areas of VLSI CAD, hand-held devices and Web based Client Server
applications. We also develop IBIS models by circuit simulation of
Spice netlists.
Category: IBIS model and IBIS related software developer.
Primary: Nikolai Bannov
Phone: (510) 413-8634, Fax: (510) 413-8080
Secondary:Bob Daniels
Phone: (510) 413-8634, Fax: (510) 413-8080
Address: 46871 Bayside Parkway
Fremont, CA 94538
Support:
Tag-line:
Category: EDA vendor
Primary: Robert Badal
Phone: (408) 501-8647, Fax: (408) 487-8090
Secondary:Ralph B.
Phone: (408) 501-8194, Fax: (408) 487-8090
Address: 1901 Guadalupe Parkway
San Jose, California 95131
Support: Brocade is a participant in and supporter of IBIS activities. We use
IBIS models for Signal Integrity Analysis on high-speed networking
products.
Tag-line: Brocade is the leading provider of Storage Area Networking
infrastructure. The Brocade SilkWorm(r) family of Fibre Channel
switches and software is designed to optimize data availability in
the storage enterprise. Using Brocade solutions, companies can
simplify the implementation of Storage Area Networks (SANs), reduce
the total cost of ownership of data storage environments, and improve
network and application efficiency and performance. For more
information, visit the Brocade website at www.Brocade.com
Category: IBIS user
* Cadence Design Systems, Inc.
Primary: Mike LaBonte
Phone: (978) 262-6496, Fax: (978) 262-6600
Secondary:Ian Dodd
Phone: (978) 262-6258, Fax: (978) 262-6600
Address: 270 Billerica Rd,
Chelmsford, MA 01824
Support: Cadence fully supports IBIS models. The SPICE-based SPECCTRAQuest
product family offers a vendor-specific, IBIS compatible signal
integrity library of over 9000 components. Cadence also
provides a translator program enabling the conversion of IBIS
1.1 through 3.2 files to Cadence library format. Tools
for enhanced model checking and simulation testing are
available.
Tag-line: Cadence, the worldwide leader in electronic design automation,
combines leading-edge technology and a complementary set of
services to accelerate and advance the overall performance
engineering of high-speed electronic systems.
Category: EDA vendor
Centro Studi E Laboratori Telecomunicazioni
(CSELT)
Primary: Flavio Maggioni
Phone: +39 011 228 6996, Fax: +39 11 228 5695
Secondary:Giovanni Ghigo
Phone: +39 011 228 5423, Fax: +39 11 228 5695
Address: Via G. Reiss Romoli 274
10148 Torino
Italy
Support: CSELT Lab offers a IBIS model extraction service using TDR
techniques based on measurements done on high performance ATE
equipment(Patent Pending).
Tag-line: CSELT guarantees high accuracy of IBIS models, thanks to the
proprietary characterization methodology based on the testing
equipment Schlumberger ITS 9000IX and ad hoc developed de-embedding
software. This high-performance ATE (Automatic Test Equipment)
allows very fast and accurate measurements of all the parameters
required by the IBIS format. More info on our web site
http://switch.cselt.it/lab_test/IBIS.htm
Category: Provider of IBIS models based on measurements.
Primary: Syed Huq
Phone: (408) 525-3399, Fax: 408-526-5504
Secondary:Sergio Camerlo
Phone: (408) 527-1378, Fax: 408-526-5504
Address: 170 West Tasman Drive
San Jose, CA 95134-1706, USA
Support: Cisco is an active participant and supporter of IBIS activities.
IBIS models are used for Signal Integrity Analysis on
High-speed Networking products. Cisco is also the webmaster of the
IBIS website.
Tag-line: Cisco Systems, Inc. (NASDAQ: CSCO) is the worldwide leader in
networking for the Internet. Cisco products include routers, LAN and
ATM switches, dial-up access servers and network management software.
These products, integrated by the Cisco IOS software, link
geographically dispersed LANs, WANs and IBM networks. Cisco Systems
news and product/service information are available on the World Wide
Web site at http://www.cisco.com. Cisco Systems is headquartered in
San Jose, California.
Category: IBIS user and model developer(Cisco ASICs).
Primary: Robert Haller
Phone: (508) 467-4546, Fax: (508) 467-4493
Address: 200 Forest St. MR01-1/P5
Marlboro MA 01752
Secondary:Shafiq Rahman
Phone: (281) 514-9079, Fax: (281) 518-0652
Address: 080802
20555 SH 249
Houston, TX 77070-2698
Support: Compaq will generate IBIS models for its own chip products,
including the line of ALPHA AXP microprocessors, peripheral and
communication chips, as needed, and support IBIS models in
in-house simulation tools.
Tag-line:
Category:
Primary: Rajesh Manapat
Phone: (408) 432-7064, Fax: (408) 943-4782
Secondary:Raymond Leong
Phone: (408) 943-2134, Fax: (408) 943-2782
Address: 3901 N. First Street
San Jose, CA 95134, USA
Support: Cypress will generate IBIS models for the integrated circuits
it designs and manufactures.
Tag-line: Cypress is a leader in the development and production of high-
performance CMOS and BiCMOS digital integrated circuits.
Category: Model provider
Primary: Brian Arsenault
Phone: (508) 435-2075 ext 14139. Fax:(508) 435-8949
Secondary:Fawn Englemann
Phone: (508) 435-2075 ext 1171. Fax:(508) 435-8809
Secondary:Terry Jernberg
Phone: (508) 435-2075 ext 12247. Fax:(508) 497-8741
Address: 171 South Street
Hopkinton, MA 01748
Support:
Tag-line:
Category:
EIA/Electronic Information Group
Primary: Cecelia Fleming
Phone: (703) 907-7554. Fax: (703) 907-7501
Address: 2500 Wilson Blvd.
Arlington, VA 22201
Support:
Tag-line:
Category:
Primary: Christian Klein
Phone: (207) 761-6242, Fax:(207) 761-6137
Secondary:Graham Connolly Phone: (207) 775-4579, Fax:(207) 761-6137
Address: 333 Western Ave.
South Portland, ME 04106
Support:
Tag-line:
Category:
Primary: Paul Gregory
Phone: (208) 323-8354 Fax:
Address: 11311 Chinden Blvd
Boise, ID 83714-1021
Secondary:
Phone:
Address:
Support: Hewlett Packard is a participant in and supporter of IBIS activities.
Hewlett Packard uses IBIS models for Signal Integrity Analysis on
various products including computing and imaging products.
Tag-line:
Category: IBIS user.
* HyperLynx
a division of
PADS Software Inc.
Primary: John Angulo
Phone: (425) 869-2320, Fax: (425) 881-1008
Secondary:Kellee Crisafulli
Phone: (425) 869-2320, Fax: (425) 881-1008
Address: 14715 N.E. 95th. St, Suite 200
Redmond, WA 98052
Support: HyperLynx supplies software for signal integrity, crosstalk, and
electromagnetic-compatibility(EMC)analysis.
HyperSuite EXT: An integrated Windows 95/98/NT-based software suite
that includes pre-layout (LineSim) and post-layout(BoardSim) signal
integrity, crosstalk and EMC simulation products.
BoardSim: The post-layout analysis package that reads a routed
board-layout file, which can come from any of several PCB layout
packages. Options include EMC analysis, crosstalk analysis and SPICE
writer. Quick Analysis uses true electrical thresholds and a unique
algorithm to quickly identify crosstalk aggressors using both driver
edge rates and layout information prior to simulation. Both batch
and interactive simulation modes are supported. BoardSim natively
supports IBIS files and ships with a set of IBIS libraries.
LineSim: This pre-layout analysis package allows detailed planning
prior to labor-intensive layout, using a specialized "topology"
schematic editor to model complex interconnect scenarios. Options
include EMC analysis, crosstalk analysis and SPICE Writer for LineSim.
The simulator reads IBIS files as part of its native library support.
LineSim ships with a library of IBIS models.
Visual IBIS Editor: The Visual IBIS Editor is an IBIS model
development tool available without charge at www.hyperlynx.com. It
includes syntax validation, the Easy IBIS Wizard for model creation,
a model template generator, and graphical viewer for I-V and V-T
tables.
Tag line: HyperLynx's signal integrity and EMC simulation tools are used by
more engineers than any competing tool on the market today. Download
our free demo at http://www.hyperlynx.com
Category: EDA vendor
* IBM
Primary: Michael Cohen
Phone: (919) 543-4042 Fax:(919) 254-7778
Address: Design Tools Department
D-26D/B-306/R-E122D
3039 Cornwallis Road
Research Triangle Park, NC 27709
Secondary:Greg Edlund
Phone: (507) 253-2952 Fax:(507) 253-4966
Address: 3605 Hwy 52 N, Dept. HDC
Rochester, MN 55901
Support: IBIS datasheets for IBM's PowerPC microprocessor family are
available on the web. IBM requires that users of its memory products
register to receive IBIS datasheets.
Tag-line: IBM is both an IBIS datasheet developer and an IBIS user. IBM
joined the IBIS Open Forum as a voting member in March of 1999.
Category:
Primary: Werner Rissiek
Phone: ++49-5251-150-620, ++49-5251-150-625, Fax: ++49-5251-150-700
Secondary:Michael Schaeder
Phone: ++49-5251-150-625, Fax: ++49-5251-150-700
Address: INCASES Engineering GmbH
Vattmannstrasse 3
D-33100 Paderborn, Germany
Support: INCASES provides the EMI and SI board screening tool EMC-ENGINEER as
well as the simulation packages SI-WORKBENCH and RADIATION-WORKBENCH.
INCASES supports IBIS models by providing an IBIS-to-INCASES converter
that bases on the IBIS Golden Parser 2.1 (IBIS 3.2 support in
development). The converter creates INCASES macromodels, corresponding
reference lists, and further information for the components in a fully
automatic way.
The INCASES Library management tool provides specific features to
import the new models generated by the converter into respective
libraries. It checks for consistency, supports the defintion of user
specific IDs, and allows to reference the models also for other
components which show a similar behaviour as the original ones.
Detailed information is available on request.
Tag-line: INCASES Engineering, GmbH, Germany, founded on November 1, 1994,
is a supplier of design automation software and consulting
services to the electronic design automation (EDA) market,
focusing on EMC and 'Design for Manufacturability'. INCASES
develops, sells, and supports two major product lines: THEDA,
acquired from Computervision Corporation and EMC-Workbench,
acquired from Siemens Nixdorf Informationssysteme AG.
Category: EDA vendor
Primary: Guy de Burgh
Phone: (805) 988-8250, Fax: (805) 988-8259
Secondary:Jon Powell
Phone: (805) 988-8250, Fax: (805) 988-8259
Address: 1385 Del Norte Rd.
Camarillo, CA 93010
Support: Quad Design has a translation program that translates from IBIS
format to Quad Design .mod format. This translator uses the
Golden Parser code with enhancements to warn of malformed (yet
legal) models. The translator supports user input to be able to
select from the min-typ-max range of IBIS data. This program
(IBIS2XTK) is available now and is distributed with XTK
Crosstalk and transmission line simulation tool kit.
Tag-line: Quad Design is a leading supplier of Signal Integrity and Timing
tools for high speed digital designs.
Category: EDA vendor
Primary: Will Hobbs
Phone: (503) 264-4369, Fax: (503) 264-1831
Secondary:Stephen Peters
Phone: (503) 264-4108, Fax: (503) 264-1831
Address: 2111 N.E 25th Avenue, JF1-209
Hillsboro, OR 97124-5961
Secondary:Frank Kern
Phone: (xxx) xxx-xxxx, Fax: (xxx) xxx-xxxx
Address: 2800 Center Drive MS DP2-400
Du Pont, WA 98327
Support: Intel is a strong supporter of the IBIS standard, and provides
IBIS models for many of its components. To access models of
publicly announced and supported components, access Intel models
directory on the IBIS web page:
http://www.eda.org/pub/ibis/models/intel
For information on models of unannounced products, contact your
local Intel field sales office.
Tag-line: Intel, the world's largest chip maker, is also a leading
manufacturer of personal computer networking and communications
products.
Category: Model provider
Primary: Shinichi Maeda
Phone: (603) 886-8711, Fax: (603) 881-8763
Secondary:
Phone:
Address: 39 Simon Street
Nashuz, NH 03060, USA
Support:
Tag-line: KAW/USA designs, engineers and consults "Total Concept
Solution" of sytem from IC packagind design to board design,
fabrication based signal integrity analysis.
Category: End user
* LSI Logic
-- The Communications Company
Primary: Larry Barnes
Phone: (719) 533-7000, Fax: (719) 533-7480
Secondary:Scott King
Phone: (612) 921-8579, Fax: (612) 921-8399
Address: 4420 Arrowswest Drive
Colorado Springs, CO 80907
Support: LSI Logic provides IBIS models for selected SCSI components from
its Storage Standard Products division.
Tag-line:
Category: Model Provider
Primary: Randy Wolff
Phone: (208)363-1764, Fax: (208)368-2514
Secondary:Yong Phan
Phone: (208)363-2184, Fax: (208)368-2514
Address: 8000 S. Federal Way
Mail Stop: 351
Boise, ID 83707-0006
Support: Micron Technology, Inc. provides IBIS v3.2 models for
selected DRAM, SRAM, and Flash memory products.
Tag-line: Micron Technology, Inc., and its subsidiaries manufacture
and market DRAMs, very fast SRAMs, Flash, other semiconductor
components, memory modules, and personal computer systems.
Category: Model provider.
* Mentor Graphics
(including VeriBest, etc.)
Primary: Bob Ross
Phone: (503) 685-0732 Fax:(503) 685-4897
Secondary:Tom Dagostino
Phone: (503) 685-1613 Fax:(503) 685-4897
Address: Mentor Graphics
8005 S.W. Boeckman Road
Wilsonville, Oregon 97070
Secondary:David Wiens
Phone: (303) 581-2306 Fax: (303) 581-9972
Address: 6101 Lookout Rd.
Boulder, CO 80301
Support: The Interconnect Synthesis (IS) product supports IBIS Version 2.1
and most IBIS Version 3.2 features.
The VeriBest PCB Signal Analyzer product uses native IBIS
device models for signal simulation.
IBIS Modeling Products include the ICX Standard Library, ICX Project
Modeling, and ICX Custom Modeling. These products are sold to Mentor
Graphics customers. Also, IBIS models are supplied to IC vendors for
re-distribution to end user customers. Models are created from
measurements of physical devices under a tightly controlled high
frequency fixture and modeling system, or from SPICE models. These
accurate models closely represent actual device behavior when used in
simulation.
Tag-line: The leading Interconnect Synthesis, signal integrity, and IBIS
model supplier for Windows and Unix platforms
Category: EDA Vendor, Model Provider
* Mitsubishi Semiconductor America,
Inc.
Primary: Tam(Tom) Cao(Mitsubishi Electronics America, Inc. - Electronic Device Group)
Phone: (919) 479-3479, Fax: (919) 479-3309
Address: Three Diamond Lane
Durham, NC 27705
Secondary:Midori Nakamae(Mitsubishi Electric Corporation. Memory IC Div)
Fax: +81 727 80 2649
Address: 4-1 Mizuhara,Itami,Hyogo 664,Japan
Support: Mitsubishi provides IBISv2.1 models for selected
memory product lines.
Tag-line: Mitsubishi designs, engineers, and produces advanced semiconductor
devices for use in computer video and communications equipment.
Category: Models provider & End user.
Primary: Gus Panella
Phone: (630) 527-4617 FAX: (630)969-1352
Address: 2222 Wellington Court
Lisle, Illinois 60532
Secondary:Jim McGrath
Phone: (630) 527-4037
Address: 2222 Wellington Court
Lisle, Illinois 60532
Support: Molex is a participant in and supporter of IBIS activities. We plan
to create IBIS models in support of the IBIS connector standard.
Tag-line: Molex is both an IBIS datasheet developer and an IBIS
user. Molex joined the IBIS Open Forum as a voting member in February
of 2000 and one of the principal developers of the proposed IBIS
Connector Specification.
Category: IBIS user and model developer
* Motorola
Primary: Ron Werner
Phone: (480) 441-0586 Fax:(480) 441-2363
Secondary:
Phone:
Address: 8201 E. McDowell Road
Scottsdale, AZ 85252
Support:
Tag-line:
Category:
* National Semiconductor Corp.
Primary: Milt Schwartz
Phone: (408) 721-3261, Fax:(408)721-4785
Secondary:John Goldie
Phone: (408) 721-2075, Fax:(408)721-4785
Address: 2900 Semiconductor Drive, M/S A-2595
Santa Clara, CA 95052
Support: National Semiconductor provides IBISv1.1 and IBISv2.1 models
from various product lines.
Refer to http://www.natonal.com/models/ibis/ibis.html for the
latest available models.
Tag-line: National Semiconductor will provide system-on-a-chip
solutions for our key data highway strategic partners, exploiting
our analog expertise as a starting point for forward integration.
Category: Model provider & End user
Primary: Calvin Trowell
Phone: (919) 991-2962, Fax: (919) 991-7440
Address: 4008 E. Chapel Hill Nelson HWY., MS D1500B10
Durham, NC 27709
Secondary:Ross Pryor
Phone 978-288-3811, Fax:
Address: 600 Technology Park Drive, M/S: E6560404
Billerica, MA 01821
Secondary:Hassan Ali
Phone 613-765-1410 , Fax: 613-763-7876
Address: 1 Brewer Hunt Way
Kanata, ON K2K 2B5, Canada
Support:
Tag-line: Nortel Networks designs, develops, manufactures, markets,
sells, finances, installs and services fully digital
telecommunications systems.
Category: IBIS user and model developer(Nortel ASICs).
North Carolina State University
Primary: Michael Steer, Paul Franzon, Alan Glaser
Phone: 919-515-5191 919-515-7351 919-515-3947
FAX for all three: 919-515-5523
Address: ECE Dept. Box 7911
NC State Univ.
Raleigh, NC 27695-7911
Support: Two SPICE to IBIS converters have been developed and are in
the public domain. They are both available on our Web page,
and at the IBIS Web page.
Category:
* North East Systems Associates, Inc. (NESA)
Primary: Dr. Ed Sayre
Phone: (978) 897-8787, Fax: (978) 897-5359
Secondary:Kathy Breda
Phone: (978) 897-8787, Fax: (978) 897-5359
Address: 636 Great Road, Suite 6
Stow, MA 01775
USA
Support: NESA is an active participant and supporter of IBIS activities.
Dr. Sayre is the chairperson of the IBIS Users' Group.
NESA engineers use IBIS models for signal integrity analysis on
high-speed designs.
Tag-line: The team at NESA specializes in design and analysis of products for
high performance networking, telecommunication, computer,
semiconductor and interconnect companies. NESA's engineers have the
experience and knowledge required to turn difficult design challenges
into cost effective, timely solutions. NESA information, and
technical papers are available on the World Wide Web site at
http://www.nesa.com.
Category: IBIS user and model developer.
* Philips Semiconductor
(including VLSI Technology)
Primary: D.C. Sessions
Phone: (480) 752-6545, Fax: (480) 752-6002
Address: 8375 South River Parkway
MS 250
Tempe, AZ 85284
Secondary:Todd Andersen
Phone: (505) 822-7666, Fax: (505) 822-7802
Address: MS 55
9201 Pan American Fwy NE
Albuquerque, NM 87113
Support:
Tag-line:
Category:
Primary: Mike Ventham
Phone: +44 1761 232191, Fax: +44 1761 233549
Address: Croft House, Chilcompton
Bath, Somerset, England BA3 4JA
Secondary:Al Wexler
Phone: (204) 942-4000, Fax: (204) 957-1158
Address: 191 Lombard Ave
Winnipeg, Manitoba, R3B 0X1
Canada
Support: Quantic provides an IBIS reader (based on the Golden
Parser) that will read IBIS models and automatically generate
data files for Phidias (our graphical VI curve device modellor)
and database files that associate the component definitions with
the pin models.
From Phidias, both SPICE models for PCB Greenfield (our pre
and post layout transmission line simulator) and models used
in BoardScan, (our PC board screener for signal integrity and
crosstalk problems), EmcScan, (for scanning radiated
emissions near the board) and Compliance (the EMC system simulator)
can be created.
This is available now for Quantic customers.
Tag-line: Quantic has been the leading supplier of field solvers and
signal integrity tools since 1983. We also provide leading edge
Electromagnetic Compatibility (EMC) tools.
Category: EDA vendor
Primary: Alexander (Sandy) Barr
Phone: (812) 941-3573 Fax: (812) 945-0805
Secondary:Aaorn Sparks
Phone: (812) 949-6361 Fax: (812) 945-0805
Address: 800 East Eight Street
P.O. Box 1208
New Albany, IN 47151-1208
Support:
Tag-line:
Category:
Primary: Gerald Bannert
Phone: +49-89-722-44631 Fax : +49-89-722-27975
Address: Dept. ICN M TC 14
Hofmannstr. 51
D-81379 Munich
Germany
Secondary:Dr. Bernhard Unger
Phone: +49-89-636-47404 Fax : +49-89-636-44595
Address: Siemens AG
ATD IT PS 8 MCH
Otto-Hahn-Ring 6
D-81739 Munich
Germany
Support: The Siemens Industrial Projects and Technical Services Group
(Siemens ATD) provides services to generate IBIS models based on
HSPICE and SPICE behavioral models based on IBIS. For obtaining
accurate high quality models Siemens ATD has developed in-house
HSPICE2IBIS and IBIS2SPICE converters.
Tag-Line: Siemens ATD provides a broad spectrum of Electronic Design
Services ranging from engineering, design support and consulting
in the domain of ASIC, FPGA, PCB and System Design with particular
emphasis on High Speed Design and EMC Engineering.
Detailed information on our services are available on the Website
at http://www.atd.siemens.de/it-dl/eda/emv
Category: IBIS user and model developer.
* SiQual
Primary: Scott McMorrow
Phone: (503) 708-4320 Fax : (503) 885-0550
Secondary:Dave Macemon
Phone: (503) 885-1231 Fax : (503) 885-0550
Address: P.O. Box 3090
18735 S.W. Boones Ferry Road
Tualatin, OR 97062-3090
Support: SiQual is a Consulting Company that provides the following services:
- IBIS Model Translations (SPICE to IBIS)
- IBIS Model Validations and Verifications
- Architecture and Pre-layout SI Studies
- Pre-Routing SI and Timing Reviews
- Post-Routing SI and Timing validation sweeps
- High Speed Board Design (Place and Route)
- Stackup Studies
- SI Training
- IBIS Training (Creation and validation)
Tag-Line: SiQual works as an integral part of your design team to get your most
difficult designs analyzed quickly and accurately.
Category: IBIS Model Creation (As Consulting engagements), IBIS model users.
Primary: Armando Conci
Phone: +39 039 6036149, Fax: +39 039 6035128
Secondary: Sandro Ferreri
Secondary: Antonio Girardi
Phone: +39 039 6037065, Fax: +39 039 6035128
Address: Via C. Olivetti 2
20041 Agrate Brianza (Milano)
Italy
Support: STMicroelectronics, Memory Product Group, Flash Division
guarantees high accuracy IBIS models for selected
standalone standard and advanced architecture ST Flash Memory
devices for ST customers usage inside board simulation.
The model request submit form is available at
http://www.st.com/products/support/memory/flash/model_fo.htm
Tag-line: STMicroelectronics (formerly SGS-THOMSON Microelectronics) is
a global independent semiconductor company, whose shares are
traded on the New York Stock Exchange, on the Paris Bourse and
on the Milan Stock Exchange. The Company designs, develops,
manufactures and markets a broad range of semiconductor
integrated circuits (ICs) and discrete devices used in a wide
variety of microelectronics applications, including
telecommunications systems, computer systems, consumer
products,automotive products and industrial automation and
control systems. Further information on ST can be found at
www.st.com.
Category: IBIS models developer.
Primary: Thomas Fisher(Data Transmissions)
Phone: (214) 480-3736 Fax: (214) 480-3160
Address: 12500 TI Boulevard
Dallas, TX. 75243
M/S 8710
Secondary:Jean Claude Perrin EMC support (Texas Instruments France)
Chair of the IEC WG6EMC task force
Phone: (33) 4 93 22 23 90 Fax: (33) 4 93 22 27 40
Address: 821 Avenue Jack Kilby - BP5
06271 Villeneuve Loubet Cedex
France
Secondary:Stephen M. Nolan(Standard Linear and Logic)
Phone: (903) 868-7410 Fax: (903) 868-5980
Address: 6412 South Sam Rayburn Freeway, M/S 835
Sherman, TX 75090
Support: Data Transmissions Group is ramping up to provide IBIS
models for their new products.
Tag-line: With more than 15,000 worldwide customers, TI's unique breadth
of digital and mixed-signal products offer innovative solutions
for today's competitive global markets.
Category: Model provider
* Time Domain Analysis Systems, Inc. (TDA Systems)
Primary: Dima Smolyansky
Phone: (503) 246-2272 Fax: (503) 246-2282
Secondary:Steven Corey
Phone: (503) 246-2272 Fax: (503) 246-2282
Address: 11140 SW Barbur Blvd.
Suite 100
Portland, OR 97219
Support: TDA Systems tools allow IBIS model extraction from TDR measurement
for IC package and PCB interconnects and passive structures
Tag-line: TDA Systems provides tools for interconnect measurements, modeling
and model verification. Our IConnect(R) software provides accurate
interconnect models by linking real-time waveform acquisition from
TDR instrumentation, model extraction based on the interconnect true
impedance profile, and model verification using an integrated
interface to a circuit simulator. We ensure customer success in
interconnect modeling work by providing our interconnect
measurement and modeling expertise.
Category: Provider of tools for IBIS model development
Primary: modeling@amp.com
Phone: Fax:
Secondary:
Phone: Fax:
Address: Harrisburg, PA
Support: Tyco Electronics currently provides SPICE models. We are evaluating
IBIS formatted models and plan to create IBIS models to support the
IBIS connector standard.
Tag-line: Tyco Electronics is the world's leading supplier of electrical and
electronic connectors and interconnection systems. Innovative
solutions for many industries including Automotive, Computer,
Communications, Consumer, and Industrial.
Category: IBIS user
Primary: Weber Chuang
Phone: 886-2-22185452 ext 6522 Fax: 886-2-22187527
Secondary:Daniel Wei
Phone: 886-2-22185452 ext 6352 Fax: 886-2-22187527
Secondary:Tina Wu
Phone: 886-2-22185452 ext 6043 Fax: 886-2-22187527
Address: 8F, No. 533, Chunchen Rd.
Shintien County, Taipei.
Taiwan. ROC.
Support: VIA Technologies, Inc. provides IBISv1.1, IBISv2.1, IBISv3.2
compatible IBIS models to our customers for SI and timing simulations.
Tag-line: VIA Technologies, Inc. is a IC maker whose products covers PC
corelogic chipsets, PC peripheral chips, lan chipsets and DVD chipsets.
Category: IBIS user and model developer/provider