On 27/06/2011 16:29, Danilo Fuselli wrote:
> Thank you Alan,
> but I have already set "/vmg" in C/C++ tab Command Line.
> What do you mean for having /vmg in my library build?
Please reply to the list, then everyone else can see the solution
(assuming we can find what that solution is!)
The /vmg setting should be inside the project file that builds the
SystemC library, and inside the project file you create for your own
project.
It's also worth checking if you have RTTI set. You can see this in the
project settings as the switch /gr
The SystemC library project file is normally correct, that's why it is
more likely to be a mistake in your own project. Remember you have to
apply the settings to both Debug and Release configurations, if you
build with both Debug and Release,
regards
Alan
>
> 2011/6/27 Alan Fitch <alan.fitch@doulos.com <mailto:alan.fitch@doulos.com>>
>
> On 27/06/2011 16:01, Danilo Fuselli wrote:
>
> Hello!
> I'm trying to run a systemc code written with 2.0.1 version.
> I downloaded systemc 2.0.1 and compiled it. I also compiled my
> code and
> all is ok, but I receive an exception during run time:
> run time check failure #0
>
>
> <snip>
>
> This can happen if you have inconsistent settings between the
> SystemC library code, and your project code.
>
> In particular, make sure you have /vmg in your project options, and
> in the library build.
>
> regards
> Alan
>
>
>
>
> How can I solve the problem?
> Thank you very much
> Danilo
>
>
>
>
> --
> Alan Fitch
> Senior Consultant
>
> Doulos – Developing Design Know-how
> VHDL * Verilog * SystemVerilog * SystemC * PSL * Perl * Tcl/Tk *
> Project Services
>
> Doulos Ltd. Church Hatch, 22 Marketing Place, Ringwood, Hampshire,
> BH24 1AW, UK
> Tel: + 44 (0)1425 471223 Email: alan.fitch@doulos.com
> <mailto:alan.fitch@doulos.com>
> Fax: +44 (0)1425 471573 http://www.doulos.com
>
> ------------------------------__------------------------------__------------
>
> This message may contain personal views which are not the views of
> Doulos, unless specifically stated.
>
>
>
>
> --
> Dott. Danilo Fuselli
> Università Politecnica delle Marche
> 0717571049
> +393358117221
> danilo.fuselli@gmail.com <mailto:danilo.fuselli@gmail.com>
> danilofuselli@hotmail.it <mailto:danilofuselli@hotmail.it>
>
-- Alan Fitch Senior Consultant Doulos – Developing Design Know-how VHDL * Verilog * SystemVerilog * SystemC * PSL * Perl * Tcl/Tk * Project Services Doulos Ltd. Church Hatch, 22 Marketing Place, Ringwood, Hampshire, BH24 1AW, UK Tel: + 44 (0)1425 471223 Email: alan.fitch@doulos.com Fax: +44 (0)1425 471573 http://www.doulos.com ------------------------------------------------------------------------ This message may contain personal views which are not the views of Doulos, unless specifically stated. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.Received on Mon Jun 27 09:40:14 2011
This archive was generated by hypermail 2.1.8 : Mon Jun 27 2011 - 09:40:24 PDT