I'll agree that this is critical -- but they may also need to be sensitive to ANOTHER signal (primarily to support differential logic signals like CML, ECL etc ) So I'd like to call this "CROSS SENSITIVE" I'll volunteer to help define this (but probably not until just after this tapeout.. hopefully just a couple more weeks) ONE MORE capability we need to support in connect models is to read input loading and output drive characteristics (measured from cell characterization) from the .lib or .tlf file.. but SNPS needs to open the .lib Standard up as well IMHO for us to reference that in the Standard. thats my 2cents for today Jonathan David Scintera Networks. j.david@ieee.org > 10. Finally, this is probably a longer term project, > but we need to take > on the issue of making connect modules sensitive > to power supplies, > particularly local power supplies. With the heavy > emphasis on power > management, and the associated use of multiple > power domains and the > disabling and enabling of power supplies, this is > becoming > increasingly important. >Received on Fri Jun 2 16:25:40 2006
This archive was generated by hypermail 2.1.8 : Fri Jun 02 2006 - 16:25:42 PDT