RE: Changes to section 2.8.3 and 2.8.4 LRM 2.3

David,

> I have lost track of the email thread.
> Can someone please tell me exactly what needs to change in 
> Section 2.8.3 and
> 2.8.4 with regards to the $identifier?
> I will then update the LRM accordingly.

My opinion is that the following changes should be made:

In 2.8.3, in the following:

"- A standard set of $identifier system tasks and functions, as defined
in Clause 8, Clause 10, Clause 17 and Clause 18 of IEEE std 1364-2005
Verilog HDL.
- Additional $identifier system tasks and functions defined using the
PLI, as described in Clause 12 and Clause 20 of IEEE std 1364-2005
Verilog HDL. "

and

"The system tasks and functions described in Clause 8, Clause 10, Clause
17 and Clause 18 of IEEE std 1364-2005 Verilog HDL are part of this
standard."

Delete the references to Clause 8, Clause 10, and Clause 12.
Leave the references to Clauses 17, 18, and 20.


In 2.8.4, in the following:

"- A standard set of `identifier compiler directives defined in Clause
11 and Clause 19 of IEEE std 1364-2005 Verilog HDL."

and

"The compiler directives described in Clause 11 and Clause 19 of IEEE
std 1364-2005 Verilog HDL are part of this standard."

Delete the references to Clause 11 and leave the references to Clause
19.

(Informational comment: In 1364-2005, system tasks and functions are in
Clause 17, VCD tasks in 18, compiler directives in 19, and PLI in 20.)

Thanks,
Shalom


Thanks,
Shalom
---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.