Answers Database

EZTAG: WARNING: Part type "XC95xxx" is supported only in BYPASS mode.


Record #1976

Product Family:  Software

Product Line:  EPLD Core

Problem Title:
EZTAG: WARNING: Part type "XC95xxx" is supported only in BYPASS mode.


Problem Description:
Keywords: EZTAG, 9500, BYPASS, XPART.DEF, CPLD
Urgency: Standard

General Description:
When downloading to a 9500 device using eztag, the following
message is encountered.

WARNING: Part type "XC95xxx" is suggested only in BYPASS mode.

The device seems to program properly even though this warning
is issued.


Solution 1:

CAUSE
=====
The device being programmed is not listed in the XPART.DEF file
located in <XACT9k or XACT9000>/DATA directory.

SOLUTION
========
Make sure that any XPART.DEF found on the hard drive has the
latest supported devices.  The newest XPART.DEF file can be
obtained from the FTP site:

(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/eztag_pc.zip)
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/eztag_hp.tar.Z)
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/eztag_sn.tar.Z)



End of Record #1976