Answers Database
Hardware Debugger M1.3: Debug operations do not affect target board.
Record #2310
Product Family: Software
Product Line: FPGA Core
Problem Title:
Hardware Debugger M1.3: Debug operations do not affect target board.
Problem Description:
Keywords: debug, cable, communication
Urgency: Standard
General Description:
If the DEBUG commands do not appear to have any affect to the target
board/device, then the Hardware Debugger may have lost communication
with the cable. In such an event no message is displayed to indicate
that communication has been lost.
Solution 1:
To re-establish cable communications execute the Menu command Cable ->
Reset. If communications cannot be re-established a pop-up message
will indicate this. If the cable is successfully reset, then the
design may have to be Downloaded again to resume normal operation.
End of Record #2310
For the latest news, design tips, and patch information on the Xilinx design environment, check out the Xilinx Expert Journals! |