Return to Support Page
 homesearchagentssupportask xilinxmap

Answers Database


M1.3.7 Map - Patch file contains 36 map, par, ngdbuild and xnf2ngd fixesas of 12-8-97.


Record #2672

Product Family:  Software

Product Line:  FPGA Implementation

Problem Title:
M1.3.7 Map - Patch file contains 36 map, par, ngdbuild and xnf2ngd
fixesas of 12-8-97.



Problem Description:
An M1.3.7 patch file is available for SunOS, Solaris, HP and NT
with 36 fixes as of 12-8-97:

NOTE: There are seven changes since the Performance Pack CD.

Fixes bug 18267 having to do with map pushing an inverter into
a closed FMAP.

Fixes bug 18524 having to do with map configuring CLB
incorrectly. H-lut was driving Y flop rather than G-lut.

Fixes bug 18989 having to do with :
FATAL_ERROR:baste:bastetspec.c:946:1.64
No NC_SIGNAL for TECHMAP_SIG on BEL    U103/OrTree0 Process
will terminate.

Fixes bug 19003 having to do with map seg fault on a
particular case.

Fixes bug 18436 having to do with map page faulting,
only when run from dsgnmgr on a particular case.

Fixes bug 18506 having to do with map trimming too much from
coregen multiplier RPM.

Fixes bug 18603 having to do with:
FATAL_ERROR:x4kma:x4kmamerge.c:2371:1.120
Too many signals to move and not enough slots on comp ...

Fixes bug 18627 having to do with map incorrectly configuring
a CIN net.

Fixes bug 18800 having to do with map incorrectly optimizing
away a flop with data driven by VCC and Q tied to GSR of
STARTUP comp.

Fixes bug 18624 related to simulation if latches.

Fixes bug 19073 having to do with:
FATAL_ERROR:x4kma:x4kmacarry.c:2456:1.96
Illegal call to swap. Fixed flags set on F or G LUTs: ...

Fixes bug 18209 having to do with map incorrectly trimming
a logiblox counter.

Fixes bug 100012 having to do incorrect configuration of a
carry CLB with an incomplete specification (no RLOCS were
used to specify LUTs to be merged with CY4).

Fixes bug 100193 (dup of 18890) having to do with guided map
core dump on a specific case.

Fixes bug 100053 having to do with:
FATAL_ERROR:basnc:basnccomp.c:3221:1.90.14.3
Cannot find other bel for unconnected pin on bel...

Fixes bug 100062 having to do with ngdbuild core dump when
loading hard macros (.nmc files).

Fixes bug 100141 having to do with map seg fault on a
specific case.

Fixes bug 100034 having to do with map not passing a TPTHRU
constraint to the .pcf file to relax a path as specified in
the .ucf file.

Fixes bug 100094 having to do with map creating bad data in
the .ngm file affecting simulation results.

Fixes bug 100274 having to do with xnf2ngd handling INFF/OFDT
pairing incorrectly, so that map incorectly removes the INFF
component when the OFDT is unused.

Fixes bug 100674 having to do with map Fatal Error:
FATAL_ERROR:x4kma:x4kmaclb.c:1500:1.100.10.6 -
Unknown CLB configuration in pushconst() for $22I749/$1I8.

Fixes bug 100894 (replication of 18974) having to do with map
not packing F-HMAP combinations from Synplicity efficiently.

Fixes bug 100728 having to do with map incorrectly configuring an IOB.

Fixes bug 101127 having to do with map fatal error:
FATAL_ERROR:basnc:basncsignal.c:262:1.61 - Could not find a bel for a sig...

Fixes bug 101151 having to do with map fatal error:
FATAL_ERROR:basnc:basncsignal.c:262:1.61 - Could not find a bel for a sig...

Fixes bug 101185 having to do with map fatal error:
FATAL_ERROR:basnc:basnccomp.c:3221:1.90.14.3-Cannot find bel...

Fixes bug 101005 having to do with map fatal error:
FATAL_ERROR:basbd:basbdbool.c:393:1.5 - Signal unassigned to variable
encountered.

Fixes bug 101073 having to do with ngdbuild core dump when processing certain .u
cf constraints. The change also fixes
a problem handling U_SET constraints. (New change since
Perfromance Pack CD)

Fixes bug 101157 having to do with ngdbuild posting errors when processing
certain .ucf timing constraints. (New change since Perfromance Pack CD)

Fixes bug 101616 having to do with map dropping INIT=S
property at lower level of hierarchy. (New change since
Perfromance Pack CD)

Fixes bug 102033 having to do with par bus error caused by
par's auto-pullup insertion code. (New change since
Perfromance Pack CD)

Fixes bug 101805 by adding drc check to detect illegal
connection made by par related to IOB EC and O pins.
(New change since Perfromance Pack CD)

Fixes bug 101942 having to do with map failing to pack a RAM component and a flo
p into the same CLB, for a particular
configuration. (New change since Perfromance Pack CD)

Fixes bug 102125 having to do with map failing to pack an FMAP into a CLB where
it drives both the H-LUT and a flop.
(New change since Perfromance Pack CD)


Solution 1:


*** This Software Update is compatible with M1.3 only ***

ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/map_sun120897.tar.ZInternet Link
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/map_sol120897.tar.ZInternet Link
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/map_hp120897.tar.ZInternet Link
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/map_nt11.zipInternet Link



End of Record #2672

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Xilinx Expert Journals!

© 1998 Xilinx, Inc. All rights reserved
Trademarks and Patents