Answers Database

Foundation Schematic: Can I add my own company logo to a Foundation schematic onto the border or table?


Record #2747

Product Family:  Software

Product Line:  Aldec

Problem Title:
Foundation Schematic:  Can I add my own company logo to a Foundation
schematic onto the border or table?



Problem Description:
Keywords: logo, schematic, border, table, title, block

Urgency: Standard

General Description:
Is it possible to add a company logo to a Foundation schematic
onto the border or table? Some customer may want to add their
own logo or graphics onto the schematic of a Foundation
project.


Solution 1:

This is possible if the logo or graphic is in the (.wmf) or
Windows Metafile Format, without the header. A Windows Metafile
can be created using programs such as Coreldraw.

To load the logo onto the schematic do the following:

From the schematic editor, select File->Table Setup, then in
the Logo Metafile section you can browse to find the .WMF file.
Click 'Apply', then 'OK'.

The logo will appear just above the Title Block in the lower
right hand corner of the schematic sheet.

Note: The logo may become distorted from the tool forcing the
graphic to fit into a pre-specified area.



End of Record #2747