Answers Database

M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt


Record #3499

Product Family:  Software

Product Line:  FPGA Implementation

Problem Title:
M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt


Problem Description:
Keywords:  x45dr, PAR, 1.4, basrt, EC, pin, unroute

Urgency:  Standard

General Description:  Following error/warnings occur when
trying to run a design through M1.4 that uses the OMUX in
the IOB and also makes use of the GND availble at the EC
pin in the IOB to drive the OMUX.

ERROR:x45dr - netcheck: Signal BUF0/USClk3/lastClkEn is routed to the O pin of
   block sClkOut<3> on routing which is not available because the EC pin is
   using the Logic Zero option. Re-route the connection to the O pin without
   using the wire shared with the EC pin.
WARNING:basrt - Error found on signal: BUF0/USClk3/lastClkEn, leaving it
   unrouted.


Solution 1:

This has been patched in M1.4.12:

ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_sol14_m14.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_sun14_m14.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_hp14_m14.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_nt14.zip



End of Record #3499