Answers Database

M1.4 Map - FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a bel for a signal...


Record #3527

Product Family:  Software

Product Line:  FPGA Implementation

Problem Title:
M1.4 Map - FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a
bel for a signal...



Problem Description:
FATAL_ERROR:basnc:basncsignal.c:262:1.62 - Could not find a
bel for a signal on pin Y of comp b3_u1_b3_source_select<1>.  Its current progra
mmed state is :
CLKX:CLK ECX:EC CLKY:CLK DY:G XMUX:F F4MUX:F4I XQMUX:QX
YQMUX:QY ECY:EC DX:H   H1:C1 DIN:C1 SR:C3 EC:C4 H:#LUT:H=H1 RAMCLK:CLK G:#LUT:G=
G1 F:#RAM: SRX:RESET FFX:#FF SRY:RESET FFY:#FF

This error is an indication of a mapping error where a
component has been created by the mapper that has an
inconsistancy between the component's configuration and
the external connectivity. In this case the Y pin of a
CLB is involved.


Solution 1:

A fix for this error is included in the current M1.4 Core
Applications patch available from the Xilinx Download Area:

ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_sol14_m14.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_sun14_m14.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_hp14_m14.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_nt14.zip



End of Record #3527