Answers Database

M1.4 : Dynatext gives Dynatext 3.0 Config Error 5055


Record #3575

Product Family:  Software

Product Line:  Other

Problem Title:
M1.4 : Dynatext gives Dynatext 3.0 Config Error 5055


Problem Description:
Keywords: Documentation CD, dtext, dynatext, dynatext.ini, DATA_DIR, Config Erro
r 5055,

Urgency: standard

General Description
After installing Dynatext Documentation to run from CD-ROM drive on a PC windows
95, and you have the installer update your Xilinx variable, you may get followin
g error when involking Dynatex Browser:

DTEXT : dytext 3.0 config error 5055
error in file d:\bin\nt\dynatext.ini
The data directory d:\\data\ntdtext\data cannot be located please verify data_di
r settings.

(in this case d: is the CD-ROM drive)


The problem is when M1.4 Implementation tool has not been installed on to the PC
, the installer will create the XILINX variable and set it to "XILINX=D:\".  The
 "\" at the end of this setting will conflict with some of the settings in the d
ynatext.ini file.


Solution 1:

Check XILINX variable setting in your AUTOEXEC.BAT file.  If
you have:   XILINX=D:\
change to:  XILINX=D:

Remove "\", save your autoexec.bat, then re-boot your machine.
Then try involking Dynatext.





End of Record #3575