File Download: pc
Contents of /pub/swhelp/xact-pc
Files/Patches/Information for the XACT core tools on a PC platform.
ATTENTION:
No patches have been created for the XACT PC tools since 03-09-98,
And no more updates are planned.
The current release is M1.4 and it is suggested to upgrade
To that release.
=============================================================================
Filename Size File Description
=============================================================================
301.exe 117KB ATM 3.01 Update (Must have 3.00)
3k_roms.zip 9KB XC3000 ROM soft macros
3kabsd.zip 975KB XACT 5.0 patch for 3x00A/L BSD files
3x90t144.zip 10KB Data files to allow XACT 6.0.x/5.2.x software
target a 3x90 and 3x90L T144 device.
Uploaded: 09-03-96
4025e.zip
1394 Kb The 4025 and 4025E device files for XACT
5.2.1/6.0.1 Also, includes the preliminary -2
speed files along with -3 and -4 for the 4025e
Solution #: 1351
For All Windows
Uploaded: 01-12-98
511fix.zip 120KB Patch for PROSeries 5.1.1 install problems
(XKEY v5.1.1, SYSBLOCK.PIF, SYSCMD.PIF,
and REDIRERR.EXE)
bitg70p.zip 291KB Fixes out of memory problem running bitgen
on 4025 on PC (Not M1)
For DOS and Windows
Uploaded: 10-25-96
chkinitp.zip 185KB PC version - program to check the INIT=
dn_ld.zip 66KB C source code for serial download of .bit fil
download.zip 66KB Executable for download cable
gndh.zip 1KB GNDH hard macro for "Improving XC4000
Design Performance"
gndhm.zip 1KB GNDH hard macro. Generates a GND signal
can be used to drive the L pin on an INLAT
symbol in order to get the transparent latch
delay
hd1061.exe 28KB Updated MS Mouse driver to correct growstub
error
lca2xnf.zip 228 Kb LCA2XNF v5.2.1j, patch for production version
v5.2.1. Bugs fixed: Bita 30256 - LCA2XNF creates
invalid 5-input gates for XC5200 designs. Also
incorrectly inverts IBUF input pin instead of
the output pin. Bita 29622,30584 - LCA2XNF loses
D pin connection under particular routing
conditions of XC4K/A/H/E RAMs and CLB FFs.
Solution #: 1199, 2074
For DOS
Uploaded: 05-28-97
makebits.zip 892 Kb Makebits v5.2.1j - fixes problem that arise when
using the tied option for the 5200 family. Also,
fixes problem to allow tie to use nets sourced
by TBUFs as sources of last resort (before
critical nets). Fixes problem of tie failing on
certain 5200 designs, complaining during the
checking phase that some CLB equations had been
set to '0'. Makeprom v5.2.1i -fixes problem that
arise when using CRC error checking for a 5202.
Install to C:\XACT
Solution #: 813, 882, 1345
For Win 95
Uploaded: 03-09-98
neocd_nt.zip 37 Kb NT device driver patch enables XACT Foundry
7.0 to run on NT machines. This device driver
is only compatible with the "new" white
security devices from MemoPlug.
Uploaded: 09-17-96
ppr521c.zip 1184 Kb ppr v5.2.1c - fixes bug where router appears to
get stuck at 99% complete. Fixes problem of a
reported unroute, but xde does not display the
unroute.
For DOS
Uploaded: 08-13-97
ppr_emul.zip 1067KB PPR patch for Base Development System v5.0
- Contains PPR.EXE stub and EMUL\PPR.EXE for
- 386 PC's which do not have math coprocessor
ppr_math.zip 1043KB PPR patch for Base Development System v5.0
- Contains PPR.EXE stub and MATHCP\PPR.EXE
- for 386 PC's with math coprocessor, and
- 486 machines and above.
prep_nt.zip 545 Kb XNFPREP patch for use on Windows NT only
Uploaded: 10-08-96
rainport.exe 31KB Fix for using key with Windows NT
rpmcon.zip 24KB RPM Constraint Utility for the PC
wg1001.exe 22KB Microsoft patch for Windows to use the
Hardware Debugger with fast pentiums (>90MHz)
ww1000.exe 22KB Patch version of VSHARE.386 to allow
ProCapture and VSM to run simultaneously
x60fixpc.zip 308KB Fixes for XACT 6.0 (PC platform)
xblox521.zip 1030 Kb xblox v. 5.2.1f - fixes problem in which an
incorrect .xg file is written. Fixes problem of
xblox crashing when expanding xblox modules.
Removed license code (no longer dependent on
licenseing software) .Install to $XACT/bin/hppa
Solution #: 950
For DOS
Uploaded: 11-10-97
xchecker.zip 365 kB Stand-alone XChecker (ver 5.2.1) software
to download and readback configuration data
for FPGAs
Solution #: 989
For DOS
xchkr4ke.zip 177KB This zip file contains the new xchecker
program with nessacery system file for
xchecker to readback 4000E devices
with new mask properly.
Solution #: 1580
For DOS
Uploaded: 12-09-96
xde521i.zip 734 Kb xact v5.2.1i (xde) - Corrects problem in which
the swapblkGroup duplicates CLBs and net
connections when there are overlaps in the set
of blocks to be swapped "from" and the set to be
swapped "to", and empty blocks are also involved
in the swap. Fixes "Bad intnet" message for RAM
intnets when f/g are 16x1 and via h.
For DOS
Uploaded: 08-13-97
xdelay.zip 591 Kb xdelay v5.2.1i - fixes problem in which xdelay
would not correctly identify RAM intnets of type
H when they consisted of the F or G function
generator output run through H. Install to
C:\XACT
For DOS
Uploaded: 08-13-97
xkeyemul.zip 112KB Version of XKEY v5.0 which does not require
floating point coprocessor
xnfba521.zip 188 Kb xnfba - (5.2.1l) - Fixes wrong timing
information due to implementation, buffers and
inverters are absorbed to the LUTs. Fixes
problem in which xnfba inserts false timing
values.
For DOS
Uploaded: 10-27-97
