Answers Database
 
 
 Foundation F1.4:  Project Manager slow to open in Windows NT 
 
 Record #3678
Product Family:  Software 
 
Product Line:  Aldec 
 
Product Part:  Foundation Project Manager 
 
Product Version:  1.4 
 
Problem Title: 
Foundation F1.4:  Project Manager slow to open in Windows NT  
 
 
Problem Description: 
Urgency:  Standard 
 
General Description: 
 
Under Windows NT, you may notice the Project Manager taking up 
to 2-3 minutes to open after invoked.  This has been seen to be 
caused by an incompatible version of the Sentinel driver which 
Foundation uses for the XVHDL keylock. 
 
 
Solution 1: 
 
To correct this problem, the current version of the Sentinel 
driver must first be removed, and then an older, more 
compatible version of the Sentinel driver may be installed. 
 
1.  First, remove the current Sentinel driver.	To do this, 
        go to the <ACTIVE>\DRIVERS\WIN_NT directory (where 
        <ACTIVE> is the Foundation design entry install directory, 
        typically C:\ACTIVE or C:\FNDTN\ACTIVE) in the Windows 
        Explorer, and double-click on the program SETUPX86.EXE to 
        invoke the Sentinel Setup program. 
 
2.  In the Sentinel Driver Setup Program window, select 
        Functions->Remove Sentinel Driver. 
 
**Note:  If you are NOT using the Metamor XVHDL compiler for 
your design, you may stop here.  The Sentinel driver is only 
required by the XVHDL compiler.  Therefore, you do not need to 
reinstall it if you are not using this VHDL compiler. 
 
3.  Next, install the Sentinel driver, ver 5.3.  This version 
        of the driver can be found on either the Foundation F1.3 
        (note: F1.3, NOT F1.4) Design Entry Tools CDROM, or on the 
        Xilinx Web site at: 
        (ftp://ftp.xilinx.com/pub/swhelp/foundation/sent_53.zip ) 
 
      3a.	From the F1.3 CDROM, use the Explorer to go to the 
     	ACTIVE\DRIVERS\WIN_NT directory, and run the program 
     	SETUPX86.EXE. 
 
      3b.	From the SENT_53.ZIP file from the Web site, unzip the 
     	file, and then use the Explorer to go to the 
     	WIN_NT\ directory.  Run the program SETUPX86.EXE. 
 
4.  This time, select Functions->Install Sentinel Driver. 
        Verify that the path to the files is correct, and click OK. 
 
5.  Reboot the system. 
 
 
 
 End of Record #3678 - Last Modified: 03/23/98 16:20  |