Product Discontinuation Notification
PDN2000-07
19 October 2000
Subject: Product Discontinuation Notice (PDN2000-07).
Discontinuation of certain XPLA CPLD Families:
Products Affected:
-
5.0V XPLA Original ( XCR5xxx)
-
3.3V XPLA Original (XCR3xxx)
-
5.0V XPLA Enhanced (XCR5xxxC)
-
3.3V XPLA Enhanced (XCR3xxxA/C)
-
3.3V XPLA2 (XCR3320/XCR3960)
-
3.3V & 5.0V 22V10 (XCR22LV10/XCR22V10)
For specific part numbers, please refer to the Attachment Titled "PDN2000-07
- Products Affected" (original Philips part numbers included for quick
cross reference as needed).
Change Description: Products listed above are being discontinued.
Reason For Change: The discontinuation of fabrication
supply sources.
Device Replacement Guidelines:
The CoolRunner XPLA3 family is the suggested replacement for the 3.3V
XPLA Original and 3.3V XPLA Enhanced families. In most cases, devices are
pin for pin compatible where package migration exists.
The XC9500 family is the suggested replacement for the 5.0V XPLA Original
and 5.0V XPLA Enhanced device families (unless conversion of the board
to 3.3V can be accomplished, in which case the CoolRunner XPLA3 family
would be the suggested replacement for low power consumption requirements).
Please note the XC9500 family is not pin compatible to the discontinued
families. For conversion information and assistance, please contact your
Xilinx representative.
The CoolRunner XPLA3 or the Spartan (FPGA) families are the suggested
replacements for the XPLA2 family. Your choice will be dependent on logic
and I/O requirements. Please note the suggested replacement families are
not pin compatible to the discontinued family. For conversion information
and assistance, please contact your Xilinx representative.
The XCR3032XL is the suggested replacement device for the 3V 22LV10
device. Please note the suggested replacement device is not pin compatible
to the discontinued device. For conversion information and assistance,
please contact your Xilinx representative.
The XC9536 is the suggested replacement device for the 5V 22V10 device.
Please note the suggested replacement device is not pin compatible to the
discontinued device. For conversion information and assistance, please
contact your Xilinx representative.
More detailed replacement information by product family and package
can be found at www.xilinx.com/products/coolpld/custnotice.htm.
For assistance in design conversions or for more information, please contact
your Xilinx sales representative
or the hotline support personnel in your region:
Key Dates: Final orders will be accepted until April 27,
2001, with final deliveries scheduled on or before December 28, 2001.
Response: No response to this notification is required.
Requests for additional data or support should be made immediately. Any
queries about the timing of these changes or requests for support beyond
the above dates should be referred to your Xilinx sales representative.
Please address any other questions you may have regarding this PDN by email
to pcn@xilinx.com or by fax at (408)
369-1718. |
