Viewlogic Interface - Top Solutions and Documentation

---

Hot Solutions

• Solution 3081 - M1: EDIFNETI 7.4, viewbase error 413: "Pin not on symbol" error
• Solution 3080 - M1: Viewlogic Board level simulation methodology
• Solution 3079 - M1: ViewDraw Check Project: "Could not load schematic sheet" error with Logiblox
• Solution 2874 - Powerview 6.1 may fail in WIR2XNF if continuation characters (+) are used

Most Requested Solutions

• Solution 4964 - How to use Viewlogic Workview Office 7.5 with Foundation F1.5i
• Solution 5968 - 1.5i Virtex schematic library for Viewlogic that supports Functional Simulation in Viewsim
• Solution 1985 - M1: Adding custom functions to Workview Office ViewDraw (LogiBLOX, EDIF)
• Solution 1893 - New Library Description File needed for M1 software with Workview Office
• Solution 2011 - Xsimmake patch needed for Workview Office 7.3 and newer (95 and NT)
• Solution 902 - Info about using XACT 5.2.1/6.0.1 with Workview Office in Windows NT.

Documentation

• Xilinx XAPP166: TAU/BLAST Support in 2.1i