Previous CORE Generator Cores & IP Updates 

---

CORE Generator 2.1i Updates

CORE Generator IP Update C_IP4
This software update is a cumulative IP update to CORE Generator v2.1i This update requires that CORE Generator v2.1i is installed. This update is cumulative and includes all the cores that were included in the C_IP3, C_IP2 and C_IP1 update. This update includes the following modules:
New in this update
•  Numerically Controlled Oscillator
•  Asynchronous_FIFO (V1.0)
•  FD-based Shift Register (V1.0)
•  RAM-based Shift Register (V1.0)
•  Twos Complementer (V1.0)
•  Decoder Binary (V1.0)
•  Distributed Arithmetic FIR Filter (V1.0)
•  Virtex FFT / IFFT - 16 Point (V1.0)
•  Virtex FFT / IFFT - 64 Point (V1.0)
•  Virtex FFT / IFFT - 256 Point (V1.0)
•  Virtex FFT / IFFT - 1024 Point (V1.0)

  Cumulative

•  Accumulator(V1.0)
•  Adder Subtractor(V1.0)
•  Comparator(V1.0)
•  Counter(V1.0)
•  Distributed Memory(V1.0)
•  Variable Parallel Virtex Multiplier(V1.0)
•  Sine/Cosine Look Up Table (V1.0)
•  Bus Gated with Control Bit (V1.0)
•  Single Output Gate (V1.0)
•  Bus Gate (V1.0)
•  Bit Multiplexer (V1.0)
•  Bus Multiplexer (V1.0)
•  BUFE Based Multiplexer Slice (V1.0)
•  BUFT Based Multiplexer Slice (V1.0)
•  FD Based Register (V1.0)
•  LD Based Latch (V1.0)



View   C_IP4 Installation Instructions & Release Notes Download   c_ip4.zip Download   c_ip4.tar.gz

CORE Generator IP Update C_IP3
This software update is a cumulative IP update to CORE Generator v2.1i This update requires that CORE Generator v2.1i is installed. This update is cumulative and includes all the cores that were included in the C_IP2 and C_IP1 update. This update includes the following modules:
New in this update
•  Accumulator(V1.0)
•  Adder Subtractor(V1.0)
•  Comparator(V1.0)
•  Counter(V1.0)
•  Distributed Memory(V1.0)

  Cumulative

•  Variable Parallel Virtex Multiplier(V1.0)
•  Sine/Cosine Look Up Table (V1.0)
•  Bus Gated with Control Bit (V1.0)
•  Single Output Gate (V1.0)
•  Bus Gate (V1.0)
•  Bit Multiplexer (V1.0)
•  Bus Multiplexer (V1.0)
•  BUFE Based Multiplexer Slice (V1.0)
•  BUFT Based Multiplexer Slice (V1.0)
•  FD Based Register (V1.0)
•  LD Based Latch (V1.0)



View   C_IP3 Installation Instructions & Release Notes Download   c_ip3.zip Download   c_ip3.tar.gz

CORE Generator IP Update C_IP2
The IP updates are cumulative IP updates to CORE Generator v2.1i The latest up date is found here. Please download the latest, rather than this update. This link is provided only for archival reasons. This update includes the following modules:
New in this update
•  Variable Parallel Virtex Multiplier(V1.0)
•  Sine/Cosine Look Up Table (V1.0)

  Cumulative

•  Bus Gated with Control Bit (V1.0)
•  Single Output Gate (V1.0)
•  Bus Gate (V1.0)
•  Bit Multiplexer (V1.0)
•  Bus Multiplexer (V1.0)
•  BUFE Based Multiplexer Slice (V1.0)
•  BUFT Based Multiplexer Slice (V1.0)
•  FD Based Register (V1.0)
•  LD Based Latch (V1.0)



View   C_IP2 Installation Instructions & Release Notes Download   c_ip2.zip Download   c_ip2.tar.gz

CORE Generator IP Update C_IP1
The IP updates are cumulative IP updates to CORE Generator v2.1i The latest up date is found here. Please download the latest, rather than this update. This link is provided only for archival reasons. This update includes the following modules:
•  Bus Gated with Control Bit (V1.0)
•  Single Output Gate (V1.0)
•  Bus Gate (V1.0)
•  Bit Multiplexer (V1.0)
•  Bus Multiplexer (V1.0)
•  BUFE Based Multiplexer Slice (V1.0)
•  BUFT Based Multiplexer Slice (V1.0)
•  FD Based Register (V1.0)
•  LD Based Latch (V1.0)



View   C_IP1 Installation Instructions & Release Notes Download   c_ip1.zip