IP Update
#2a Install Instructions
- While not required, it is recommended that you install the latest
3.2i Software Service Pack.
- This IP Update is available both as a .zip file, and as a .tar
file which has been compressed using "gzip". The Zip file can
be unpacked using WinZip 7.0 SR-1 or later on Windows. On Unix,
some versions of unzip may be used to unpack this Zip file on
UNIX, but see Xilinx
Answer #7711 for information on some known issues with this.
On UNIX platforms, it is recommended that you download the ".tar.gz"
file and unpack it using the UNIX command line utilities gunzip
and tar. Note that the date stamp of the "/user/sbin/tar" command
you use must be February 10, 1998 or later.
- Quit out of the CORE Generator application if you are currently
running it.
- Download the zip file 32i_ip_update2a.zip
or 32i_ip_update2a.tar.gz
and save it to a temporary directory.
- Extract the zip file or tar.gz archive to your Xilinx installation
directory, preserving the relative paths such as: coregen/ip/xilinx/baseblox_v1_0/com/xilinx/ip/baseblox_v1_0/
- Delete the corelib.xml file located in /coregen/ip
to force the CORE Generator to regenerate this database during
startup.
- Restart the Xilinx CORE Generator. The Xilinx CORE Generator
will automatically detect that new IP has been added and will
provide you with an opportunity to update "All" cores
to the latest versions, add only "New" cores, or make
only a "Custom" selection of cores available,
for your current CORE Generator project. Verify whether the installation
has succeeded by verifying that you can see the new cores in the
CORE Generator GUI, such as "ADPCM for Virtex" in the
"Communication & Networking/Telecommunication" folder.
IP Update #2a Release Notes
Comments, Questions, or Problems? Please E-mail coregen@xilinx.com or enter a Web case. |