Pulse Code Modulation (PCM) Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

Pulse Code Modulation (PCM)

The ``standard'' number format for sampled audio signals is officially called Pulse Code Modulation (PCM). This term simply means that each signal sample is interpreted as a ``pulse'' (e.g., a voltage or current pulse) at a particular amplitude which is binary encoded, typically in two's complement binary fixed-point format (discussed below). When someone says they are giving you a soundfile in ``raw binary format'', they pretty much always mean (nowadays) 16-bit, two's-complement PCM data. Most mainstream computer soundfile formats consist of a ``header'' (containing the length, etc.) followed by 16-bit two's-complement PCM.

You can normally convert a soundfile from one computer's format to another by stripping off its header and prepending the header for the new machine (or simply treating it as raw binary format on the destination computer). The UNIX ``cat'' command can be used for this, as can the Emacs text editor (which handles binary data just fine). The only issue usually is whether the bytes have to be swapped (an issue discussed further below).


Next  |  Prev  |  Up  |  Top  |  Index  |  JOS Index  |  JOS Pubs  |  JOS Home  |  Search

[How to cite this work] [Order a printed hardcopy]

``Mathematics of the Discrete Fourier Transform (DFT), with Music and Audio Applications'', by Julius O. Smith III, W3K Publishing, 2003, ISBN 0-9745607-0-7.
Copyright © 2007-02-02 by Julius O. Smith III
Center for Computer Research in Music and Acoustics (CCRMA),   Stanford University
CCRMA  [Automatic-links disclaimer]