Pin Freeze File:  version M1.5.19

;If you have made significant changes to your 7300 design and have trouble
;recreating the same pinout try disabling the FREEZE_OPTIMIZATION option.
;Removing the semicolon on the FREEZE_OPTIMIZATION line below disables this
;option.  FREEZE_OPTIMIZATION=OFF tells the optimization software to
;take account of the pin-assignments (e.g., apply different collapsing
;rules to logic assigned to fast-function blocks).
;Do NOT use this option when targeting a 9500 device.
;FREEZE_OPTIMIZATION: OFF
9572XL100 XC9572XL-7-TQ100
$Net00016_ S:PIN29
&__A__8 S:PIN30
&__A__7 S:PIN35
&__A__6 S:PIN90
&__A__5 S:PIN89
&__A__4 S:PIN42
&__A__3 S:PIN78
&__A__2 S:PIN52
&__A__1 S:PIN74
$Net00015_ S:PIN37
A S:PIN95
B S:PIN96
C S:PIN9
D S:PIN97
E S:PIN10
F S:PIN6
G S:PIN12
OFL S:PIN94
GAUGE3 S:PIN55
GAUGE2 S:PIN58
GAUGE1 S:PIN60
GAUGE0 S:PIN13
STACKLED0 S:PIN32
STACKLED1 S:PIN15
STACKLED2 S:PIN36
STACKLED3 S:PIN53


;The remaining section of the .gyd file is for documentation purposes only.
;It shows where your internal equations were placed in the last successful fit.

PARTITION FB1_1 "ADDRESS<0>" "$Net00013_" "$OpTx$FX_SC$716" "H6/H8/$Net00029_"
		 "H6/H8/$Net00025_" "STACKOUT<1>" "H6/H8/$Net00021_" "H6/STATMACH1/STATE"
		 "$OpTx$FX_SC$715" "$OpTx$FX_SC$714" "$OpTx$CE_ALU/CE_ALU_D2_INV$1086" "ADDRESS<1>"
		 "STACKOUT<2>" "H5/DATA3/H5/DATA3_D2" "H5/DATA2/H5/DATA2_D2" EXP6_
		 "H5/DATA1/H5/DATA1_D2" "H5/DATA0/H5/DATA0_D2"
PARTITION FB2_1 "ALUVAL<0>" "$Net00009_" "H5/QRESET/H5/QRESET_D2" "H5/ADDSUB1/S3/$Net00266_/H5/ADDSUB1/S3/$Net00266__D2"
		 "$Net00001_" "$Net00002_" "H5/ADDSUB1/S1/$Net00266_/H5/ADDSUB1/S1/$Net00266__D2" "$Net00004_"
		 "$OpTx$H5/ADDSUB1/$Net00002_/H5/ADDSUB1/$Net00002__D2_INV$1082" EXP7_ "ALUVAL<3>" "$Net00006_"
		 "ALUVAL<2>" "$Net00003_" "ALUVAL<1>" "$Net00005_"
		 "$Net00007_" EXP8_
PARTITION FB3_1 "H6/H8/$Net00037_" "STACKOUT<0>" "H6/H8/$Net00036_" "H6/H8/$Net00035_"
		 "H6/H8/$Net00034_" "STACKOUT<3>" "H6/H8/$Net00033_" "H6/H8/$Net00031_"
		 "H6/H8/$Net00030_" "$Net00012_" "H6/H8/$Net00028_" "H6/H8/$Net00027_"
		 "H6/H8/$Net00026_" "$Net00010_" "H6/H8/$Net00024_" "H6/H8/$Net00023_"
		 "$Net00011_" "H6/H8/$Net00022_"
PARTITION FB4_4 "SWI<6>" "SWI<5>" "SWI<4>" "SWI<3>"
		 "SWI<2>" "SWI<1>" "SWI<0>" "H3/DELAY3"
		 "H3/DELAY2" "H3/$Net00001_" "$OpTx$OPCODE<2>/OPCODE<2>_D2_INV$1083" "$OpTx$OPCODE<1>/OPCODE<1>_D2_INV$1085"
		 "$OpTx$OPCODE<0>/OPCODE<0>_D2_INV$1084" "$OpTx$FX_DC$711" "H5/ADDSUB1/S2/$Net00266_/H5/ADDSUB1/S2/$Net00266__D2"