|
|
|
|
|
|
Answers Database
SYN2XNF 3.4 / XACT 5.0: about XNFMERGE error 221 (processing hard macros)
Record #358
Product Family: Software Using DS401 v3.01 Xilinx-provided hardmacro library components, the users will run into the following error when invoking syn2xnf 3.40 (which calls out XNFMERGE 5.0): ------------------------------------------------------------------- % syn2xnf testhm @(#) SYN2XNF Version 3.40 6/30/93 16:39:37 (c) Copyright 1992, 1993 Xilinx Inc. All rights reserved. LCANET,4 INFO: Using part type 4005PC84-5 speed4 4005.die -5 4005PC84 Aborting due to errors with/in netlist sub file(s). XNFMERGE Ver. 5.0.0 (c) Copyright 1987-1994 Xilinx Inc. All rights reserved List of files read Read testhm.sxnf Read file /proj/xsi/install/ds401_dev_3.0/data/xsi/xprim_4000/rm16x4h.xnf ERROR 221: Filename /proj/xsi/install/ds401_dev_3.0/data/xsi/xprim_4000/rm16x4h .xnf called recursively. Can't accept recursive designs *** Serious Error *** Problem processing sxnf file on command => xnfmerge Check your path variable in your .cshrc file and be sure it includes the ds401installDir/bin/sparc path and try again. ------------------------------------------------------------------ Workaround: Run HM2RPM on the hardmacro HM file which should reside in the directory specified by XNFMERGE (DS401-v3.01-dir/data/xsi/xprim_4000 directory). 1)Copy the HM file to your project directory and run HM2RPM, which should generate an XNF file to be merged in by XNFMERGE v5.0. Then proceed with: 2)cp design.xnf design.xff 3)xmake -x design End of Record #358 - Last Modified: 12/29/95 12:20 |
| For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips! |