Answers Database
Possible cause of XSIMMAKE 5.0 ERROR 7 (sh: 17067 Memory fault - core dumped)
Record #529
Product Family: Software
Product Line: XACT FPGA
Product Part: xsimmake
Product Version: 5.2
Problem Title:
Possible cause of XSIMMAKE 5.0 ERROR 7 (sh: 17067 Memory fault - core dumped)
Problem Description:
On some designs, XDRAW does not correctly draw the simulation schematic.
SHORT DESCRIPTION: Possible cause of XSimMake ERROR 7
XSIMMAKE COMMAND : check -p sdesign
sh: 17067 Memory fault - core dumped
ERROR 7: Command [check -p sdesign ] failed to execute properly.
When running XSIMMAKE on a ViewLogic design, XSIMMAKE fails after running
XDRAW, during check, producing the above error message.
On some designs, XDRAW does not correctly draw the simulation schematic.
The call to check -p following XDRAW will stop XSIMMAKE with a memory fault
and then Error 7. This occurs most often with "four way intersections" or
other unusual net/bus routing.
SHORT DESCRIPTION: Possible cause of XSimMak
Solution 1:
Open the simulation schematic and look for missing or unconnected nets.
Redraw the offending sections of the original design and then rerun XSimMake.
End of Record #529 - Last Modified: 11/15/96 18:22 |
