Answers Database
PPR: ERROR 1173: the file \path\dsn.lca associated with the LCA cell \path\dsn could not be found.
Record #1153
Product Family: Software
Product Line: M1 Graphical/General
Product Part: Design Manager
Product Version: 6.0
Problem Title:
PPR: ERROR 1173: the file \path\dsn.lca associated with the LCA cell \path\dsn could not be
found.
Problem Description:
Design Manager\Flow Engine stops with a pr 1173 error
*** PPR: ERROR 1173:
The file "\path\my_dsn.lca" associated with the LCA cell
"\path\my_dsn" could not be found.
PPR Terminating due to error status from subtool.
Solution 1:
If an LCA file on a drive other than the one the xproject is on is used as a guide file then
PPR will return
*** PPR: ERROR 1173:
The file "\path\my_dsn.lca" associated with the LCA cell
"\path\my_dsn" could not be found.
If a guide .lca file on either a second local drive or on a network drive is selected PPR may fail w
ith the message above.
The problem occurs because the software does not specify a drive before the path
If the LCA file is moved to the same drive as the project then this error goes away.
End of Record #1153 - Last Modified: 11/15/96 14:50 | 
