Answers Database
XC4000E: MEMGEN always uses the part 4005EPG156 for Synchronous Rams.
Record #1269
Product Family: Software
Product Line: XACT FPGA
Product Part: memgen
Product Version: 5.2
Problem Title:
XC4000E: MEMGEN always uses the part 4005EPG156 for Synchronous Rams.
Problem Description:
Urgency: Standard
Description
MEMGEN will always use the part 4005EPG156 for Sync_Rams,
even if you specify a part on the command line with the
"parttype=4008EPC84" option, or if you specify the
part in the memory definition file (.mem).
Solution 1:
There shouldn't be a problem with this, because you will always
be instantiating this component (XNF file) in another higher
level module. This higher level module will also need a part
type specified, and it will over-ride all lower level modules
part-types.
If you are still concerned you could hand edit the XNF file to
correct the PART record, but this shouldn't be necessary, and
is not recommended.
End of Record #1269 - Last Modified: 09/10/97 15:11 |
