Answers Database
men2xnf8/enwrite: Pin mapping from part interface to superseding interface not possible
Record #1311
Product Family: Software
Product Line: Mentor
Product Part: enwrite
Problem Title:
men2xnf8/enwrite: Pin mapping from part interface to superseding interface not possible
Problem Description:
Urgency: Standard
General Description:
Men2xnf8 fails with return code 1.ENWrite may fail during Men2XNF8 (return code 1) with the followin
g error
(as seen in the men2xnf8.log file):
// ENWrite has detected an exception condition during processing --
Printing Status Messages
// Warning: An instance in a model references part $PONY/express/part
interface express which cannot have its pins mapped to the new
superseding interface (from: DDMS/EDDM/EDDM General 18)
// Error: Pin mapping from part $PONY/express/part interface express to
superseding interface is not possible because at least one pin cannot be
found in the superseding interface (from: DDMS/EDDM/EDDM Connectivity
10)
Solution 1:
This may be caused by a mismatch between a pin name on a symbol and what is
known as the "compiled pin name."
To correct this, go into PLD_DA and open the symbol for the named interface
in the error message. Select Check -> With Defaults. The Check Pin
section of the Check report may show something like this:
WARNING: Compiled pin name "D-DO-DO-DO" and PIN "D-D-DA-DA-DA" on P$2
do not match.
Select the pin labelled "D-DO-DO-DO" then select Miscellaneous -> Change
Compiled Pin Name. Type "D-D-DA-DA-DA" in the dialog box. Check and save
the symbol, then rerun Men2XNF8.
End of Record #1311 - Last Modified: 05/24/99 11:27 |
