Answers Database
F1.4, F1.5 Simulator: Saving simulation probes and I/O signals
Record #1317
Product Family: Software
Product Line: Aldec
Product Part: Foundation Logic Simulator
Problem Title:
F1.4, F1.5 Simulator: Saving simulation probes and I/O signals
Problem Description:
Urgency: Standard
General Description:
This is the procedure to save the probes placed on the
schematic, signals added to the Waveform Viewer in the
simulator, and stimulators on these signals so that they may
be brought back for future simulations.
Solution 1:
1. Place all desired simulation probes on the schematic
using the SC Probes toolbar menu or select the signals
you wish to view from the Signal --> Add Signals dialog
box in the Foundation Logic Simulator. Set up any
stimulators that will be used every time this design is
simulated, such as clocks, constants (0 or 1), or
formulas.
2. In the simulator, select File --> Save Waveform.
Enter a name to save simulation data and click OK.
3. To load the signal list and stimulators, select File -->
Load Waveform. Select the appropriate .TVE filename and
click OK.
End of Record #1317 - Last Modified: 08/06/98 15:38 |
