Answers Database
Hardware debugger: Incorrect cable specification given.
Record #1322
Product Family: Software
Product Line: M1 Graphical/General
Product Part: Hardware Debugger
Problem Title:
Hardware debugger: Incorrect cable specification given.
Problem Description:
When Hard ware debugger is trying to establish communications with the xchecker cable and device it
may return the message;
Incorrect cable specification given. The
connected cable is : Serial
Solution 1:
Something about the cable is recognized as 'Serial':
1) Make sure that the cable is an xchecker cable.
The head will say:
Model: DLC4
Power: 5V 100mA Typ.
Serial: DL <number>
2) Make sure that user specifies the correct port.
For hwdebugr, use Setup->Commmunication to specify the correct port
For xchecker, run it as: xchecker -port com2
3) Make sure that the cable is on the correct port
4) Check to see if the customer has mouse or other device
like a fax or modem connected to the serial port?
End of Record #1322 - Last Modified: 01/09/97 17:29 |
