Answers Database
XABEL/FOUNDATION: What is needed to compile a design containing XABEL blocks
Record #1388
Product Family: Software
Product Line: Aldec
Product Part: Foundation HDL Editor
Problem Title:
XABEL/FOUNDATION: What is needed to compile a design containing XABEL blocks
Problem Description:
To be able to compile a design containing XABEL blocks in Foundation,
you will need to install the following:
For FPGA and/or XC7000 designs:
1. The Foundation package (schematic entry, HDL Editor, and
simulation)
2. XABEL (DS371). This may be installed from either the
Foundation CDROM or from the XACTStep CDROM.
3. XACTStep 6
For XC9500 designs:
1. The Foundation package V6.0.1 (schematic entry, HDL Editor,
and simulation)
2. XABEL (DS371). This may be installed from either the
Foundation CDROM or from the XACTStep CDROM.
3. XACT-CPLD (DS560)
This will allow you to enter and synthesize the ABEL design,
implement the design, and also do a timing simulation in
Foundation after the design has been implemented.
Solution 1:
End of Record #1388 - Last Modified: 11/04/96 09:16 |
