Answers Database
HARDWARE DEBUGGER: Many internal signals cannot be selected
Record #1432
Product Family: Software
Product Line: M1 Graphical/General
Product Part: Hardware Debugger
Product Version: 6.0.1
Problem Title:
HARDWARE DEBUGGER: Many internal signals cannot be selected
Problem Description:
When running the Hardware debugger, several internal signals cannot be
selected although they are present in the .lca and .xtf files
Solution 1:
Not all siganls can be selected by hardware debugger. Only
the signal names that show up in the <design>.ll file are
available. The .ll file lists all internal nodes that
corespond to a probe point such as CLB outputs.
If the name is not on the list then there is no way to force
it to be on the list without re-implementing the design.
If you would like to Re-implement the design for this purpose,
you can force the net to be external to a CLB by placing an
X attribute on the net. This should put the net name at a
probable location and makebits will enter the proper names
into the .ll file
End of Record #1432 - Last Modified: 01/09/97 17:35 |
