Answers Database


X9500: Using Local Feedback Paths


Record #1523

Product Family: Software

Product Line: EPLD Core

Product Part: xemake6

Problem Title:
X9500: Using Local Feedback Paths


Problem Description:
The XC9500 Function Blocks feature a Local Feedback Path
which allows for faster feedback delays within a single
function block. This allows function block outputs to drive
into the same function block's AND array, without going outside
of the function block.

*Note:	XC9536 devices do not contain local feedback paths.

The current version of the XACT-CPLD 9500 fitter software supports
this LFBK path, but certain steps must be followed to ensure
its use.


Solution 1:

First you must get a software patch from our BBS or FTP site.

The name of the file is FITTER<platform>.zip

(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/fitterpc.zipInternet Link)
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/fittersn.tar.ZInternet Link)
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/fitterhp.tar.ZInternet Link)

BBS: 408-559-9327
       SWHLP\CPLD\

After installing the Patch, the following guidelines must
be used in order to take advantage of the Local Feedback Paths:

1.) The source and destination logic must be placement
      constrained into the same Function Block.

To do this...
Schematic Entry: Use the LOC attribute.
ABEL Entry: Use the PARTITION Xepld Property Statement.

*NOTE:	LOC attributes may only be placed on Primitives.
	See Solution #788 for more information on which
	components are valid Primitives.

2.) The path must be time-constrained with a Timespec. The
      Timespec may either be placed on the schematic, or in a
      Constraint file (.CST). Making an unrealistically small
      timespec (like 1ns) on the path will force the software to
      use the Local Feedback Path.

      For more information on specifying Timespecs:
      See Soln #1331


EXAMPLE:
Say you have two flip flops and you want the path from the
output of the first to the input of the second to use the
Local Feedback Path in Function Block 6.

 ____				     ____
|    |---------(^^^^^^^^^^)---------|	 |
|____|	       (__________)	    |____|

FlipFlop1     Combinatorial	     FlipFlop2
		 Logic

LOC=FB6 			     LOC=FB6
TNM=FLOP1			     TNM=FLOP2

<----------------------------------------->
Put a TIMESPEC on this path which is
unreasonable, say 1ns. The software will
know it can't meet this timespec but will
use the local feedback trying it's best to
meet the TIMESPEC.

TS01=FROM:FLOP1:TO:FLOP2=1ns

**NOTE**
The following is a situation in which the software is not yet
capable of using the Local Feedback Path, although it is
architecturally possible.

If one of the endpoints of the desired Local Feedback Path also
feeds the Enable pin of a bidirectional I/O pin, the current software (XACT-CPLD v6.0.1 + Patch) is
  not able to use the
Local Feedback Path. This limitation is being addressed for
the next major software release.

EXAMPLE: LFBK desired between FF1 and FF2.

 ___	      ___
|   |--------|	 |-----------|
|___|	     |___|	   |\|	      ____
			   | >-------<____| BIDIRECTIONAL I/O
FF1	     FF2	   |/
		     TRISTATE BUFFER



Solution 2:

In order for the fitter to take TIMESPECs into account during fitting process, user must enable XACT performace under IMPLEMENTATION Template.




End of Record #1523 - Last Modified: 06/12/97 08:31

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!