Answers Database
XACT-CPLD, 9500: What do my environment settings need to be?
Record #1688
Product Family: Hardware
Product Line: 9500
Product Part: 9500
Problem Title:
XACT-CPLD, 9500: What do my environment settings need to be?
Problem Description:
To use the XACT-CPLD (DS560) software, the following
environment variables must be set. Put the following lines in
either the autoexec.bat, or a separate .bat file which will
be executed before using the XACT-CPLD software.
These resolutions assume:
-XACT-CPLD has been installed to C:\XACT9000
-XABEL (DS371) has been installed to C:\XACT
-Viewlogic Interface (DS391) has been installed to C:\WVOFFICE
The following 4 Resolutions show setups for
1.) Foundation (design contains no ABEL)
2.) Foundation (design contains ABEL)
3.) Viewlogic (design contains no ABEL)
4.) Viewlogic (design contains ABEL)
Solution 1:
Foundation (design contains no ABEL)
SET PATH = C:\XACT9000;<rest_of_path>
SET XACT = C:\XACT9000
Solution 2:
Viewlogic (design contains ABEL)
SET PATH = C:\XACT9000;C:\XACT;C:\WVOFFICE;<rest_of_path>
SET XACT = C:\XACT9000;C:\XACT
SET WDIR = C:\WVOFFICE\STANDARD
Solution 3:
Viewlogic (design contains no ABEL)
SET PATH = C:\XACT9000;C:\WVOFFICE;<rest_of_path>
SET XACT = C:\XACT9000
SET WDIR = C:\WVOFFICE\STANDARD
Solution 4:
Foundation (design contains ABEL)
SET PATH = C:\XACT9000;C:\XACT;<rest_of_path>
SET XACT = C:\XACT9000;C:\XACT
End of Record #1688 - Last Modified: 02/04/97 13:51 |
