Answers Database
Foundation Schematic: How to control output slew rate
Record #1792
Product Family: Software
Product Line: Aldec
Product Part: Foundation Schematic Capture
Problem Title:
Foundation Schematic: How to control output slew rate
Problem Description:
Urgency: Standard
General Description: How can I set certain outputs to be
FAST or SLOW slew rate on a Foundation schematic?
Solution 1:
If left unspecified, all outputs will default to SLOW slew
rate.
To specify the slew rate to be FAST, do the following:
1. Double-click on the OPAD you wish to make FAST
2. In the "Parameters" section of the Symbol Properties
Dialog box, find the box labeled 'Name:'. Type FAST in
this box.
The FAST attribute only requires a Name, and does not
require a Description.
3. You will now see FAST= in the box which lists all the
parameters. The number of dots next to the attribute
determines what is displayed on the schematic. Double-
clicking on the parameter (FAST=) will change the number
of dots.
One dot: The Description only will show on schematic.
Two dots: Both the Name and Description will show.
No dots: Neither Name nor Description will show.
End of Record #1792 - Last Modified: 05/21/99 15:19 |
