Answers Database
EZTAG: WARNING: Part type "XC95xxx" is supported only in BYPASS mode.
Record #1976
Product Family: Software
Product Line: EPLD Core
Product Part: EZTag
Problem Title:
EZTAG: WARNING: Part type "XC95xxx" is supported only in BYPASS mode.
Problem Description:
Urgency: Standard
General Description:
When downloading to a 9500 device using eztag, the following
message is encountered.
WARNING: Part type "XC95xxx" is suggested only in BYPASS mode.
The device seems to program properly even though this warning
is issued.
Solution 1:
CAUSE
=====
The device being programmed is not listed in the XPART.DEF file
located in <XACT9k or XACT9000>/DATA directory.
SOLUTION
========
Make sure that any XPART.DEF found on the hard drive has the
latest supported devices. The newest XPART.DEF file can be
obtained from the FTP site:
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/eztag_pc.zip )
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/eztag_hp.tar.Z)
(Xilinx File ftp://ftp.xilinx.com/pub/swhelp/cpld/eztag_sn.tar.Z)
End of Record #1976 - Last Modified: 03/19/97 14:43 |
