Answers Database
Cable not recognized: Eztag hangs when execute is pressed
Record #2166
Product Family: Software
Product Line: EPLD Core
Product Part: EZTag
Problem Title:
Cable not recognized: Eztag hangs when execute is pressed
Problem Description:
Urgency: Standard
General Description:
When the parallel download cable is attached to a port along
with a key, the cable may not be seen.
Solution 1:
One possible solution is to increase the voltage level slightly
to about 5.2V on the target board.
End of Record #2166 - Last Modified: 05/23/97 17:41 |
