Answers Database
M1.2.11 MAP: FATAL_ERROR:x4kma:x4kmabel.c:161:1.37 - Didn't find out signal on bel G
Record #2232
Problem Title:
M1.2.11 MAP: FATAL_ERROR:x4kma:x4kmabel.c:161:1.37 - Didn't find out signal on bel G
Problem Description:
Urgency: standard
General Description:
Executing MAP may yield the following error message:
FATAL_ERROR:x4kma:x4kmabel.c:161:1.37 - Didn't find out signal on bel G of comp I_036818/ram_spo<2><
6>
Solution 1:
If the above error message is seen on a design that contains Dual Port RAM, and the DPO pin is not h
ooked up, then MAP for version 1.2.11 may give this error. The solution is to either use the DPO pin
or to substitute a Sync. RAM instead (which does not have a DPO pin). If you are indeed using your
DPO pin, then you should check to see if the logic it sources was trimmed.
End of Record #2232 - Last Modified: 06/05/97 15:04 |