Answers Database
M1.5 LOGIBLOX: LogiBLOX will not always "Stop on Warning"
Record #2239
Product Family: Software
Product Line: FPGA Implementation
Product Part: logiblox
Product Version: 1.5
Problem Title:
M1.5 LOGIBLOX: LogiBLOX will not always "Stop on Warning"
Problem Description:
Urgency: standard
General Description:
The Setup menu in LogiBLOX has a "Stop on Warning" option.
LogiBLOX will not stop on a DRC warning, only Module Expansion
warnings. A sample DRC warning is:
"Both input and ouput clock enable pins are used. the design
will fail down the flow unless both clock enable pins are
connected to the same signal."
Solution 1:
Check the logiblox.log file for DRC type warnings.
End of Record #2239 - Last Modified: 03/02/99 17:45 |
