Answers Database
M1.3/M1.4 JTAG Programmer: Files are "missing" when programming across platforms
Record #2273
Product Family: Software
Product Line: CPLD Implementation
Product Part: jtagpgmr
Product Version: 1.3
Problem Title:
M1.3/M1.4 JTAG Programmer: Files are "missing" when programming across platforms
Problem Description:
Urgency: Standard
General Description:
When programming XC9500 devices with the JTAG Programmer
software, if any of the JED files being used is located across
a network AND on another platform than what is being used to
run the JTAG Programmer, the software may claim that the JED
files specified are missing.
Solution 1:
This is due to the fact that the syntax in which the network
path is specified will not be understood across platforms.
For example, a file which is located on a PC in the path:
I:\JEDEC\FILES\FF1.JED
will not be understood by the UNIX tools, and similarly from
a UNIX Workstation to a PC.
The workaround is to move all the JED files to a location on
the same platform as that which is being used to program the
devices.
End of Record #2273 - Last Modified: 10/04/97 14:12 |
