Answers Database
M1.3 JTAG Programmer: Programming a 9500 device fails intermittently on a Solaris machine
Record #2380
Product Family: Software
Product Line: CPLD Implementation
Product Part: jtagpgmr
Product Version: 1.3
Problem Title:
M1.3 JTAG Programmer: Programming a 9500 device fails intermittently on a Solaris machine
Problem Description:
Urgency: standard
General Description:
Trying to program a 9500 device using xchecker cable on a
Solaris 5.5.1 machine with the M1.3 Jtag programmer GUI or
commandline jtagprog executable will fail intermittently.
Here is the error message:
ERROR:basut - Xchecker re-configuration file for boundary-scan
TAP driver was not completed. Check that the XILINX
variable is set correctly, that the cable connections and
power supply levels are correct. Run the cable
diagnostics to check that the cable is functioning
correctly.
If the problem occurs every time. there is most likely another
issue.
Solution 1:
The resolution is to try again. It should work on the next try.
End of Record #2380 - Last Modified: 10/04/97 14:13 |
