Answers Database
M1.3.7 TRCE - Doing a TIG in the UCF file on a signal which is the output of a tristate buffer does not work.
Record #2790
Product Family: Software
Product Line: FPGA Implementation
Product Part: trce
Product Version: 1.3
Problem Title:
M1.3.7 TRCE - Doing a TIG in the UCF file on a signal which is the output of a tristate
buffer does not work.
Problem Description:
Doing a TIG in the .UCF file on a signal or signals which is the output of a tristate buffer does no
t work. The TIG is ignored and the signal will show up in the .TWR report. The only workaround is to
put each signal that you wanted ignored, into the .PCF file, which will work in not doing any timin
g analysis on the specified paths.
Reference #100113
Solution 1:
A patch is available on the FTP site:
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/trce_sun091597.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/trce_sol091597.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/trce_hp091597.tar.Z
ftp://ftp.xilinx.com/pub/swhelp/M1.3_alliance/trce_nt.zip
This patch is also available from the M1.3 Performance Pack CD.
End of Record #2790 - Last Modified: 11/20/98 16:33 |
