Answers Database


M1.4 Map: DROP_SPEC property takes priority over other TIMESPECs regardless of where it is specified in the flow


Record #2893

Product Family: Software

Product Line: FPGA Implementation

Product Part: map

Product Version: 1.4.

Problem Title:
M1.4 Map: DROP_SPEC property takes priority over other TIMESPECs regardless of where it is specified in the flow



Problem Description:
Urgency: Standard

Reference #: 18676

General Description: M1.4:
The DROP_SPEC is a TIMESPEC-related constraint that allows
you to designate that timing analysis should not be performed
on a specific TIMESPEC property. DROP_SPEC can only be
specified within constraint files.

Map does not follow standard constraint priority ordering
when implementing the DROP_SPEC constraint. The standard
way of determining which set of constraints takes priority
depends on what point in the flow the set of constraints is
specified, as follows:

(Lowest to Highest:
   Schematic -> .NCF file -> .UCF file -> .PCF file)

This means that constraints specified in a .NCF file
(including DROP_SPEC), may be overridden by other constraints
specified in constraint files read in by M1 at later stages
of the implementation flow.

Currently the DROP_SPEC constraint takes priority no matter
where it is specified within the flow.


Solution 1:

Currently there is no work around.




End of Record #2893 - Last Modified: 10/07/97 23:02

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!