Answers Database


M1: How to convert an existing XACTstep 5.x design to use the M1.x tools


Record #3096

Problem Title:
M1: How to convert an existing XACTstep 5.x design to use the M1.x tools


Problem Description:

Urgency:	     Standard

General Description: What are the guidelines for converting an existing
                design using the XACTstep 5.x version of tools, to
                use the M1.x version of tools?


Solution 1:


An application note titled "Xilinx Software Conversion Guide from
XACTstep v5.x to XACTstep vM1.x" has been created and is availible
on the Xilinx FTP site in the following location :

M1.5 Version:

ftp://ftp.xilinx.com/pub/documentation/M1/convergd_m1_5.pdfInternet Link

M1.4 Version:

ftp://ftp.xilinx.com/pub/documentation/M1/convergd_m1_4.pdfInternet Link




End of Record #3096 - Last Modified: 08/25/98 14:16

For the latest news, design tips, and patch information on the Xilinx design environment, check out the Technical Tips!