Answers Database
M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt
Record #3499
Product Family: Software
Product Line: FPGA Implementation
Product Part: par
Product Version: 1.4.
Problem Title:
M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt
Problem Description:
Urgency: Standard
General Description: Following error/warnings occur when
trying to run a design through M1.4 that uses the OMUX in
the IOB and also makes use of the GND availble at the EC
pin in the IOB to drive the OMUX.
ERROR:x45dr - netcheck: Signal BUF0/USClk3/lastClkEn is routed to the O pin of
block sClkOut<3> on routing which is not available because the EC pin is
using the Logic Zero option. Re-route the connection to the O pin without
using the wire shared with the EC pin.
WARNING:basrt - Error found on signal: BUF0/USClk3/lastClkEn, leaving it
unrouted.
Solution 1:
This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:
Solaris: ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: ftp://ftp.xilinx.com/pub/swhelp/M1.4_alliance/core_nt17.zip
End of Record #3499 - Last Modified: 09/28/98 09:09 | 
