Answers Database
M1.X JTAG Programmer: Clicking icon makes hourglass appear, then goes away
Record #3804
Product Family: Software
Product Line: CPLD Implementation
Product Part: jtagpgmr
Product Version: 1.4
Problem Title:
M1.X JTAG Programmer: Clicking icon makes hourglass appear, then goes away
Problem Description:
Urgency: Standard
General Description:
Clicking the JTAG Programmer icon makes an hourglass icon
appear for a few seconds, but the hourglass goes away and no
GUI is launched. Also, if the jtagprog command-line program
is run, an error message comes back to the effect of "Cannot find
basut.acd". These errors tend to come with the lab install.
Solution 1:
Make sure that the temporary variables are pointing to a valid location.
An example would be:
TEMP c:\temp
TMP c:\temp
Verify that c:\temp exists and that there is disk space available on that drive.
Solution 2:
Check the XILINX environment variable. It is likely not pointing
to the proper directory. An example of what it should be is:
XILINX c:\fndtn
End of Record #3804 - Last Modified: 05/18/99 15:38 |
