Answers Database
F1.4,M1.4,Map,license,Error: basse ... No such feature exists (-5,116)
Record #3933
Product Family: Software
Product Line: FPGA Implementation
Product Part: map
Product Version: 1.4
Problem Title:
F1.4,M1.4,Map,license,Error: basse ... No such feature exists (-5,116)
Problem Description:
Urgency: Standard
General Description:
When trying to implement a design, an error is produced in map:
Error: basse - Unable to lock license for xc4013e. No such feature exists (-5,116).
The part described may be any part larger then 10k gates (eg XC4013E or greater, XC5215, XC4013XL or
greater, XC4028EX or greater)
Solution 1:
The error comes from trying to target a part larger than those supported by the BASE package (BAS, B
SX, BOX).
To verify the license being used:
1. Verify the path assigned to the LM_LICENSE_FILE variable:
Win95:
At a DOS prompt, enter:
echo %lm_license_file%
WinNT:
Check the environment variable settings
This should produce a path, pointing to your license
file.
2. Follow this path and open the license.dat file.
On the INCREMENT or PACKAGE line, note the software package
(eg FND-BAS-PC, FND-BSX-PC, FND-EXP-PC, FND-STD-PC,
FND-BOX-PC ALI-BAS-PC, ALI-STD-PC).
If the software package has BAS, BSX or BOX, then it is a BASE package and does not support parts la
rger than 10k gates.
BOX is the temporary license provided with the installation of the tools (it has another limitation
- Bitgen is not licensed).
If the user has a STD or EXP license, but has not changed the LM_LICENSE_FILE variable from the inst
allation settings, the tools are most likely still using the Temporary (limited - Base) license that
is included with the tools. This license can be found in the fndtn\data directory and will have a s
oftware package type of FND-BOX-PC (Foundation tools).
End of Record #3933 - Last Modified: 05/21/98 10:08 |
