Answers Database
V1.5 COREGEN: None of the AllianceCore Cores are grayed out when Virtex is selected as the target architecture
Record #4157
Product Family: Software
Product Line: Coregen
Product Part: Coregen
Product Version: c1_5
Problem Title:
V1.5 COREGEN: None of the AllianceCore Cores are grayed out when Virtex is selected as the
target architecture
Problem Description:
Urgency: standard
General Description:
The AllianceCore Cores are not grayed out in the COREGEN
GUI when Virtex is selected as the target architecture,
even though most of these cores cannot be targeted to a
Virtex.
Solution 1:
The reason for setting the GUI in this manner is because
with the cores are *not* grayed out, the pop-up box that
comes up when you double-click on the module displays
contact information for the vendor instead of just
an error indicating that the architecture is not supported.
Information on Virtex support of the various AllianceCORE
modules can be obtained directly from the respective
AllianceCORE vendor.
End of Record #4157 - Last Modified: 08/17/98 17:20 |
