Answers Database
2.1i: FPGA Editor: Unable to unhighlight a component after adding it and highlitghting it
Record #6603
Problem Title:
2.1i: FPGA Editor: Unable to unhighlight a component after adding it and highlitghting it
Problem Description:
Urgency: Standard
General Description:
Selecting an empty component, adding it and then pressing
highlight makes it difficult to unhighlight the component.
Solution 1:
Resolution 3:
You can also define a hot key (the letter 's' for example) with
the following command 'alias [s] "pick -order site:etc'". Then
point the cursor over the site, press the hot key and the site is
selected. Now you can unhilite it.
Solution 2:
Resolution 2:
Select the site using the command 'select site <siteName>'
and then press the unhilite button.
Solution 3:
Solution:
You are highlighting the outline of the site instead of the
actual component. This is because the site is still selected
after you have added the component. There are a number
of options to avoid this:
Resolution 1:
You can turn on the autodeselect feature using the main
property sheet, or the command "setattr main auto-deselect
on". This option will automatically deselect any
component after a command has been issued on it.
End of Record #6603 - Last Modified: 06/29/99 16:12 |
