Answers Database
PromGen 2.1i: Parallel cable doesn't complete configuration with Virtex chains.
Record #7763
Problem Title:
PromGen 2.1i: Parallel cable doesn't complete configuration with Virtex chains.
Problem Description:
Urgency: Standard
General Description: When configuring a daisy-chain of FPGAs with a Virtex in the first position,
down-stream devices do not complete the startup sequence. This is not the case with XChecker
which gives extra clocks at the end.
Solution 1:
Manually give extra clocks at the end of the sequence.
This problem is fixed in the latest 2.1i Service Pack available at
http://support.xilinx.com/support/techsup/sw_updates/
End of Record #7763 - Last Modified: 10/15/99 15:55 |
