Answers Database
Synopsys Compiler, NGDBuild: A port list construct was found in .... EDIF file, this is not supported. Try enabling bus expansion.
Record #8017
Product Family: Software
Product Line: Synopsys
Product Part: xsi-libs
Product Version: 2.1i
Problem Title:
Synopsys Compiler, NGDBuild: A port list construct was found in .... EDIF file, this is not
supported. Try enabling bus expansion.
Problem Description:
Urgency: Standard
General Description:
When translating an EDIF netlist from Syonpsys Design Compiler, NGDBuild can give the
following error:
"A port list construct was found in .... in EDIF file, this is not supported.
Try enabling bus expansion"
Solution 1:
Make sure that the following parameter is set in your .synopsys_setup file:
edifout_no_array = true
This is set in the templates provided in $XILINX/synopsys/examples:
template.synopsys_dc.setup_dc for Design Compiler and XC4000/Spartan series devices
template.synopsys_dc.setup_virtex for Design or FPGA Compiler and Virtex series devices.
End of Record #8017 - Last Modified: 11/08/99 13:47 |
