RFC 106 NETWORK WORKING GROUP NIC 5776 Request for Comments #106 Thomas O'Sullivan RDS 3 March 1971 USER/SERVER SITE PROTOCOL NETWORK HOST QUESTIONNAIRE The answer to a number of questions about the characteristics and operation of Network HOSTS will be useful to implementers of some early versions of TELNET, and/or to the USER/SERVER SITE PROTOCOL Committee in their consideration of a full TELNET PROTOCOL specification. Questions of current interest are covered on the attached questionnaire. The Technical Liaison contact at each HOST site is asked to review these questions and fill in the answers as soon as convenient after receipt. One of the members of the committee listed below will contact each HOST site by telephone in the next few days to record the answers. Committee members include: Bob Long SDC John Melvin SRI/ARC Ed Meyer MIT/MAC Tom O'Sullivan RDS Results of the questionnaire will be tabulated and distributed as an RFC. [Page 1] NETWORK HOST QUESTIONNAIRE* For TELNET Consideration Installation __________________________ Prepared By _______________ System** _____________________________ Date _____________________ 1.) Does system operate on keyboard terminal input on one character at a time (e.g. searching for a special character other than end of line), or does it accumulate a line at a time and operate on the line when a special character is entered, e.g. Carriage Return (CR)? [ ] Line at time [ ] Character at time [ ] Both (Explain) __________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ 2.) What maximum buffer size does your system provide for input of a physical line from a keyboard terminal, and for output to a terminal, printer, or screen? Input______Char Output_____Char Remarks: ____________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ ================= * If there is insufficient space on the questionnaire, continue answers on back of page. ** Fill out separate questionnaire for each HOST to be directly interfaced to an IMP. [Page 2] Network HOST Questionnaire (Continued) 3.) Describe the effect in your system of use of the following keying conventions. Indicate how implemented, i.e. is there a hardware interrupt? Does the terminal respond? How? What is sent into system as data, what is echoed, etc. If the key(s) are not available, so indicate (as may be the case for Newline for some systems, line feed for 2741's, etc.). If available but has no meaning, so indicate. Key Strokes Implementation System Action CR __________________________ __________________ LF __________________________ __________________ NL __________________________ __________________ CR,LF __________________________ __________________ Terminal Type = __________________________ If appropriate, enter data for other terminal types on the back of this page. 4.) What special character or characters are used in your system to awaken some process during the entry of data from a terminal (e.g. control C for some systems, break on others, etc.)? Character(s) Operation ___________ ___________________________________________ ___________ ___________________________________________ ___________ ___________________________________________ ___________ ___________________________________________ [Page 3] Network HOST Questionnaire (Continued) 5.) List the types of keyboard terminals and codes supported by your system. __________________________________________________________ __________________________________________________________ __________________________________________________________ 6.) What internal code(s) is used in your system to represent character sets? If not ASCII nor EBCDIC, attach a copy of the code. __________________________________________________________ __________________________________________________________ __________________________________________________________ 7.) For each terminal type do you support it in: Half Duplex (Pure) _______________________________________ Half Duplex (with Break or Attention) ____________________ Half Duplex (Break & Reverse Break) ______________________ Full Duplex (without echo) _______________________________ Full Duplex (with echo) __________________________________ 8.) For optional echo systems, at initial connect time is the terminal assumed to require an echo? [ ] Yes [ ] No [Page 4] Network HOST Questionnaire (Continued) 9.) Does your system perform error detection (e.g. parity check) on terminal input and, if so, is this a hardware or software check? _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ 10.) Does your system support punched paper tape input? If so, what sort of end of line sequence is used? _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ [ This RFC was put into machine readable form for entry ] [ into the online RFC archives by S.M.H. 5/97 ] [Page 5]